Web Analytics Made Easy - StatCounter

Tools Kit Tenders

Get complete information related to latest Tools Kit Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Tools Kit Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Tools Kit Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :40289846 Due date: 02 Jun, 202502 Jun, 2025 NA
Tender For bid to ras purchase of spares - nut (a1-1-15) , nut m18 plain(jcb super plate xxx i ac) , bolt m18x90(jcb super xxx i ac) , joint water outlet (44tc plate-w) , radiator bottom hose(jcb super xxvii b-17) , de spanner 27x32(jcb super, plate- v11 d) , strut gas door(plate-iv j-1) , tail lamp left side(item no-906) , door seal right hand (jcb super page 95) , fuel pipe fuel filter to fuel pump(ms-174) , fuel pipe feed pump to fuel filter(ms-175) , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , hose assy suction(item no - 1202) , light hand lamp 12v , element fuel sediment filter(u v-2162) , bulk head hose(plate-xiii j-2) , secondary element(ispl sl-1904) , gasket for cyl head thickness 1.25(ms-156) , motor wiper linkage assy(plate-1x g-1) , injector assy(vs turbocharged engine)(ms -171) , hose 3 by 4 inch bsp usp 2150mm(plate-xxxi aa-15) , set piston ring 0.50 o s , header for cooler and filter( ms-177) , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , tools kit (set of 41items) , bonded washer seal, 1 by 2 inch bsp , bolt plough 3 by 4 inch unf x 23 by 4 inch bs311 type-9(sl-60) , cab base mounting , repair kit , oil seal(ms-183) , pin pivot( ms sl no-4) , hose 1 by 4 inch x 1 by 4 inch bspx520 long , bearing linner( ms-20) , filter engine oil , element suction(jcb 3dx plate b1-2-1 sl no 4) , wiper arm(ms-80) , lock handle with key(ms sl-51) , seal kit (ispl sl no 1513) , filter element , gaiter gear lever , light rear combination lh tail lamp lh (c1-3-11) , element fuel filter 30micron(sl no-xxx c-8) , leaver tipping (plate-vi t-1) , brake piston , seal rear( ms sl no-131e) , bush , plate pressure clutch 6.0mm (ms sl no-212) , seal , kit spider 106.4x43.9 dia(plate-f3-1-1) , rod seal , seal(ms sl-33) , brush carrier assy(ms-192) , v-belt (b-57) , throttle lever & control assy(jcb ispl sl no 806) , seal kit(ms-126) , lead bty positive ( ms sl no- 65) , seal shaft(ms sl no-131g) , brake shoe(ms-187) , thermosted abi(item no-2491) , bearing (h1-1-1 by 13) , filter assy , pressure hose(escou) , fuel maint filter 5 micron jcb 3dx super) , injector(item no-2526) , plate brake counter(ms sl no-144a) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , kit spider(jcb f1-6-10) , filter fuel assy.(item no-2132) , grease bucket pump , propshaft (p92)(price list-51883) , valve solenoid assembly(ctlg 3dx f5-1-1) , king post carriage(item no-647) , boom assy (jcb 3dx u v) plate b4-4-1 , drive head (item no-1536) , axle steer drive(item no-1521) , decal panel , dowel , spring(ms sl-64) , bolt banjo , rubber hose(plate-l1-4-10) , brush spring(ms-191) , seal,filter cap ( plate no- b1-3-2, sl no- 6a) , horn 12v (plate-c1-12-2) , bty cover (ms-67, jcb u v) , sealing ring ce(ms-190) , relay f r (ms sl-140) , cleaner active wiper(iv r-12,383) , adhesive(iv,r-10) , rh handle , jug oil 200cc , fan belt xpa1280(ispl 4r1040t sl-1 p-79) , oil seal hsg (plate-2h096) , feed pump (side opening)(ms -170) , cable assy throttle controll(ms-96(a)) , water pump assy , pump oil (f5-1-1 e jcb) , roof moulding(plate-iv e-1) , set piston ring 0.75 o s , fuel injection pump vs mico(ms-169) , alternator 12v 65amp(ms-197) , pump hydraulic(jcb super) , radiator aluminium (plate-xxxiii) , backhoe bucket 21 inch wide (ispl plate-k04) , clutch assy , rear axle assy 30 kph , seal kit(ms sl-62) , ignition switch (ispl escou sl no 637) , pressure plate(ms sl-429) , hose suction main hydraulic pump(e2-1-1) , hose , hose 1 by 2 inch x 1 by 2 inch bspx660mm long str , hose(plate-e1-2-1 by 13) , thermostat element(ms-164) , solenoid switch(ms-181) , pivot pin alloy steel(ms sl-18) , fuel filter , lead bty negative (jcb 3dx (u v) ms ser no 66) , rocker arm adjusting screw(ms sl-539) , link track rod (plate-f1-3010) , engine fan-21(jcb super) , alternator(item no-75) , grease bucket pump , kit seal main hyd pump(plate-e2-2-1) , drive assy(4r1040t starter page 70) , armature assy

CTN :40510899 Due date: 09 Jun, 202509 Jun, 2025 NA
Tender For supply of non sparking tools kit as per is 4595 (q3)

CTN :40267435 Due date: 30 May, 202530 May, 2025 NA
Tender For supply of mta maint of wss 83 - pipe wrench 24 inch , plumbing tools kit for 15mm to 50 mm , water proof tape 4 inch , gi gate valve 70 mm , gi gate valve 60 mm , gi gate valve 50 mm , gi gate valve 40 mm , gi gate valve 30 mm , gi gate valve 20 mm , gi gate valve 15 mm , gi socket 30 mm , gi socket 25 mm , gi socket 20 mm , gi socket 15 mm , gi tee 50 mm , gi tee 40 mm , gi tee 30 mm , gi tee 25 mm , gi tee 20 mm , gi tee 15 mm , gi tee reducer 50 x 15 mm , gi tee reducer 20 x 15 mm , gi tee reducer 40 x 50 mm , gi l bend 15 mm , gi nipple 15 mm , gi tee equal 15 mm , spanner of plumbing , die set , chain wrench vice , gi pipe 80 mm , gi pipe 70 mm , gi pipe 60 mm , gi pipe 50 mm , gi pipe 40 mm , gi pipe 30 mm , gi pipe 20 mm , gi pipe 15 mm , hexa blade with frame , big cock brass 15 mm , gi union 80 mm , gi union 70 mm , gi union 60 mm , gi union 50 mm , gi union 40 mm , union 32mm , union 20mm , elbow 32mm , elbow 20mm , tee 32mm , tee 20mm , tee 15mm , gi socket 32mm , gi socket 20mm , gi nipple 20mm , big cock steel 15 mm , big cock 20mm , stop cock 32mm , stop cock 20mm , stop cock 15mm , rubber washer 50mm , rubber washer 32mm , gi pipe 32 mm , union 50mm , gi socket 50mm , elbow 50mm , tee 50mm , reducer socket 50mm x 32mm , reducer socket 32mm x 20mm , reducer socket 20mm x 15mm , tank nipple 15 mm , float valve , thread , stop cock 50mm , water tank 1000ltr black , water tank 500 ltr black , safeda , m seal liquid

CTN :40391122 Due date: 02 Jun, 202502 Jun, 2025 NA
Tender For corrigendum : supply of non sparking tools kit as per is 4595 (q3)

Central Government / Public Sector

CTN :40500956 Due date: 20 Jun, 202520 Jun, 2025 NA
Tender For supply of different types working tools kit set of (1) combination plier insulated with t hick ca sleeve with joint cutter length 205mm 01 no (2) insulated wire stripper & cutter 16sqmm 01 no (3) insulated long nose plier 01 no (4).neon bulb tester cum screw driver set with 8 no%u2019s o f blade similar 01 no 180/- (5) fitting opening key(fdb/cfl/tube light/rru) 01 no (6) de spanner set 8 pcs of sizes 6/7,8/9,10/11,12/13,14/15,16/17,18/19/,20/22 01 set (7) ring spanner set 01 set (8) a djustable spanner length 255mm 1 no (9) test lamp holder (brass) fitted with 2 mtrs of 2 core flexibl e copper wire 1 no (10) flat file 150mm 1 no (11) ball pen hammer (300 gm) 1 no (12) torch,4 cell ( led) 1 no (13) fuse puller 6%u201d 1 no (14) hydrometer 1 no (15) cell tester (range 12v dc) 1 no (16) digital multimeter with tongue tester 1 no (17)pvc insulating tape 25mm(10mtrs) 1 no (18) he avy duty cable cutting knife adjustable in aluminum casing overall size 140mm 1 no (19) infrared di gital thermometer (temperature gun) 1 no (20) chisel 150mm 1 no (21) cleaning brush 1 no (22) f use wire 1mtr make taparia or equivalent note : one sample should got approved before bulk supply [ warranty period: 30 months after the date of delivery ]

CTN :40228797 Due date: 27 May, 202527 May, 2025 NA
Tender For corrigendum : supply of repair to tata mobile 088271h - labour charge for servicing and replacement and fixing of unserviceable filter , engine oil 15w40 , diesel fuel filter , oil filter , coolant , steering oil , break oil , clutch oil , air filter , labour charge computerised wheel alignment and wheel balancing , labour charge for removing and refixing after fuel tank cleaning , labour charge servicing replacement defective parts of door and making up the bends and rubber hose , labour charge servicing and replacement of unserviceable front disc , brake rubber boot , labour charge for servicing external clogging of intercoolers and radiator making up defects as reqd , material and labour for servicing and replacement of unservicable drive belts , labour charge serving and making up defects for bleeding of clutch actuation system , labour charge servicing and replacement of necessary defects for proper sealing of air intake system , labour charge servicing and tightening all fasterners , fasterners with acessories , labour charge for checking and replacement as necessary defects in electrical system ensure usage of genuine fuses with correct ratings condition of fuse and relay holding , fuses with relay , labour charge for check steering wheel play check for proper condition of ball joints and rubber boots of tie rod drag link for looseness damage , rubber boots of tie rod , labour charge for complete servicing of door with necessary replacement , labour charge for checking of wiper assembly and replacement of unserviceables parts and painting , wiper motor stator rewinding , wiper motor armature winding , wiper motor fxing materials , wiper linkage , wiper blade , wiper arm , labour charge for complete dismantling and servicing of rear load leaf spring and bending and refitting the same and replacement of unserviceables parts , rear spring bushing kit , centre bolt , clamp , labour charge for complete burnt starter from vehicle and replacing following parts , solenoid switch , carbon brush set , bushing set , fitting kit , labour charge for complete dismantling of steering from the vehicle , replacement of steering center line assy , replacement of steering center line pin kit , material and labour for rectifing denting filling painting as existing , material and labour for servicing washing and greasing

CTN :40405363 Due date: 30 May, 202530 May, 2025 12.20 Crore
Tender For custom bid for services - operation and maintenance of mobile equipment at nsl for a period of 01 year in 3 mtpa isp at nagarnar near jagdalpur, chhattisgarh state-nmdc steel limited has setup up a 3.0 mtpa integrated steel plant at nagarnar, chhattisgarh with coke oven, sinter plant, blast furnace, steel melting shop, thin slab caster, hot strip mill route and other auxiliary units- 2. contractor s scope of work/supply/responsibility: brief description of scope of work (not limited to) needs to be carried out by successful bidder 1. to carry out operation of mobile equipment as mentioned in annexure a by deputing skilled, qualified and experienced manpower. 2. to carry out maintenance of mobile equipment as mentioned in annexure b by deputing skilled, qualified and experienced manpower. 3. to maintain and operate the effluent treatment plant specially made for fmd as per environmental norms. 4. deployment of at-least the prescribed minimum strength of experienced manpower as indicated in clause no. 5.0 to successfully execute the operation & maintenance activities, with a provision to keep reserve in each manpower-category (if required) to meet the minimum daily requirement for round the clock operation and maintenance. 5. all the tools tackles and special tools including diagnostic tools like: mechanic tools, electrician tools, welder tools, tyre fitter tools, special tools, lifting tools, hydraulic pressure testing kit etc. required for operation & maintenance and repair of mobile equipment is in bidder s scope. separate tools should be available for site maintenance team and shop floor team. all tools and tackles should be tested and certified by third party. 6. all the shift personnel will report to respective shift supervisor of the successful bidder administratively. the shift supervisor shall be decided by bidder in consultation with nsl. bidder shall organize all the jobs of o&m with the help of their supervisors/ engineer and they shall coordinate continuously with nsl to carry out the operation and maintenance activities. 7. operation and maintenance of mobile equipment shall be carried out on 24 x 7 basis including sundays and holidays on a shift-wise basis (four shifts [a, b, c & g]. i. for operation: 1.operation of all the equipment will be in all shifts as and when required as listed in annexure a. 2.inspection report of vehicle will be prepared by bidder and approval of the same will be obtained from nsl. a.preventive maintenance: 1. checking/ adding/ replacing engine oil, hydraulic oil, brake oil, def level etc.; 2. checking and cleaning oil filter; 3. checking and adding/replacing engine coolant as the case may be; 4. checking fuel level and adding fuel if required; 5. checking and cleaning of fuel and air filters; 6. checking hydraulic filters, hoses, seal, o-ring etc.; 7. checking electrical switches, relay, fuse, bulb etc.; 8. battery charge level checking and charging & battery maintenance/cleaning; 9. checking all the safety devices like back horn, seat belt, camera, beacon light etc.; 10. check air pressure in tyre and check wheel nut tightness; 11. checking and adjustment of transmission, alternator and other belts and chain drive; 12. cleaning and washing of the vehicles; 13. maintaining good housekeeping of washing ram; 14. cleaning of operator/driver cabin; 15. greasing in all points; 16. apply cardium compound on wire rope/crane rope; 17. any other activity as required. b. periodic maintenance 1. engine oil change; 2. replacing fuel filter; 3. replacing oil filter; 4. changing of air filter kit; 5. change of steering filter; 6. gear box oil change; 7. rear axle oil change; 8. power steering oil change; 9. replacement of coolant; 10. carrying out tyre inflation and repair; 11. welding and gas cutting works; 12. housekeeping work of the repair shop; 13. cleaning and washing of the vehicles. c.breakdown maintenance: in case of breakdown of any mobile equipment as listed in annexure

Central Government And Public Sector

CTN :40435334 Due date: 02 Jun, 202502 Jun, 2025 NA
Tender For supply of tools kit for multi section digital axle counter comply to the rdso spec.no. rdso/ spn/ 176/ 2013/ ver.3 or latest. the tool kit shall be minimum equipped with the following equipments: (i) all mechanical tools shall be of reputed make like taparia/ bosch etc. (ii) digital millimeter true rms type o f make fluke 189 or similar reputed make with probe set - 1 no. (iii) adjustable torque wrenches 25-135 n/ mtr with 13 mm and 19 mm inserts- 1 set (iv) set of spanners screw drivers and soldering iron - 1 set (v) d ummy wheel - 1 no. (vi) marking jig - 1 no. (vii) adapter card - 1 no. (viii) extended wired socket to interfac e with diag no. stic plug - 1 no. (viii) selector switch on panel base - 1 no. (ix) dac ec card puller etc. (wor k nrl line at rni) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40434073 Due date: 29 May, 202529 May, 2025 NA
Tender For supply of standard tool for c&w staff consisting of 03 tool kit sets (i) complete tool kit for l hb side inspection gang (ii) complete tools kit for lhb under gear examination gang (iii) complete tool kit for lhb pressure testing gang as per details of items and specification as per attached annexure-a,b and c. (warranty period : upto 30 months from the date of delivery.). make- bosch, stanley, groy, taparia or si milar reputed. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40392241 Due date: 09 Jun, 202509 Jun, 2025 NA
Tender For supply of non-sparking tools kit. as per annexure-a. (conforming to is 4595-1969) [ warranty perio d: 30 months after the date of delivery ]
 Loading, Please wait...

Connect us via What's Up