Latest toothed segment Tenders | Government toothed segment Tenders

Central Government/Public Sector

CTN :45264914

30 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho

CTN :45240268

30 May, 2026 1.50 Lacs

Leh - Jammu And Kashmir

Tender For supply of automatic matching unit , distributer mechanisam base seal , switch bush button , hoses pipes 8mm , igb seals

Central Government / Public Sector

CTN :45218669

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - m s heavy melting actual lot no. 03122605 0624. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps, packing plates, jacks, mould shoes, liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other miscellaneous items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no.3 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :45134644

18 May, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bin no. a-01 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery

Central Government / Public Sector

CTN :45066223

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - m s heavy melting actual lot no. 03122605 0516. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps, packing plates, jacks, mould shoes, liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other miscellaneous items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no.3 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :45031588

08 May, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- material lying at bin no. c-29 in scrap yard judw. remarks- loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery.

Central Government/Public Sector

CTN :44892543

23 Apr, 2026 NA

Multi City - Haryana

Tender For corrigendum : auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bin no. a-19 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery

Central Government / Public Sector

CTN :44815703

15 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - m s heavy melting actual lot no. 03122604 0628. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps, packing plates, jacks, mould shoes, liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other miscellaneous items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no.3 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :44815781

17 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For corrigendum : auction sale of depot ferrous scrap - cond. and u/s melting scrap such as cond. end shield, anchors, connecting rod, elbow, fiisher plate, pinion gears, centre pivot, bss hanger, narrow jaw adapter, screw coupling, tie bar, draw bar hook, welding test in full/cut/single/fabricated pieces, push rod, lever, cut parts of cattle guard, end shield, stator w/o coil, knuckle, adapter, axle guide, cut brake beam, brake wheel lever, side pillar, anti falling atd rod, pull rod, shaft, toothed segment, tamping tool, racer,chucks, air brake components, wagon/coach cut up parts, supporting plate, cbc pin,cbc, bogie frame cut ups, sleeves, brake head with/without brake block attachments, adjustable pull rod & safety chain, slack adjuster, crow bar, adapter, angle, channel, plate, rod, different types of cocks, pipe, rings, brake anchor, anchor block, buckle, box, pin, rivet, bolt, back bush, anvil smith, pedal switch & base, stay plate, inner & outer rings of bearing, connecting rod, brake gear components, screw coupling,spring holder plate assembly, crank shaft assembly, cylinder linear centering disc, double hook chain, chain of various sorts and sizes, alternator end shield, modified hanger, weighing machine weights, test bar & hardness table, parking brake link, axle box inner cover, tension rod, tensioning rod gauge plate, pin punches, pinch bar, nut, wide jaw adapter, narrow jaw adapter, top housing, door chainless cotter, cc pad, control rod, fabricated side, cut off angle cock and all released m.s. components of rolling stock/carriage/wagon/loco. all the above items are of all sorts, shapes and sizes in full/broken/cut/dismantled in as is where is condition. pl.no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) during delivery if any major non-ferrous items found the same may be handed over to custodian. 2) cutting permitted for heavy nature items only. 3)loading permitted by crane / jcb. location: bin j

Central Government/Public Sector

CTN :44720002

09 Apr, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bg-6 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery

Toothed Segment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors