Latest tor steel Tenders | Government tor steel Tenders

Central Government/Public Sector

CTN :41080531

28 Jul, 2025 NA

Erode - Tamil Nadu

Tender For supply of ss cooling pipe with flange for hett-5400 transformer for rh to radiator to transformer top cover as per clw drg no. in 6007.01 alt-c ref-14 or bhel drg no 44661950085 rev-01.

State Government

CTN :41052738

04 Aug, 2025 67.93 Lacs

Gandhinagar - Gujarat

Tender For supply of spares for bottom ash handling system of ash plant - unit no.3, 4 & 5 at gandhinagar tps. - shoulder bolt with lock plate for assembling part no.8 (part no.9) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., cross brace (part no.11) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., resilient gate face p.no-2,for bottom ash hopper,drg 8743/2b/571, shoulder bolt with lock plate for assemblying part no.8 (part no.9) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, cross brace (part no.11) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, gate face 1 set consists of ss:316 gate face with m.s back up plate of 24x24 squire bottom feed gate of unit no. 5, cam segment p.no-1 for 33"x30 excen crusher, front wear plate/anvil plate of 33" x 30" clinker crusher / grinder assembly for unit-3and4 (1 set equals to 3 nos.)., back wear plate/plate combing (part no. 6) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 3 nos.)., side wear plate(part no. 8) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 2 nos. left hand and 2 nos. right hand wear plate)., shaft with shaft structure and shaft sleeve of 33" x 30" clinker crusher / grinder assembly for unit-3 and 4., 33"x30" single roll clinker crusher / grinder complete assembly without drive arrangement, fluid coupling, chain drive and driven sprocket as per dwg. no.8743-2b-582(rev-1) for unit-3and4, feedsump below clinker crusher for unit no.3 and 4, roll (cam segment) 1 setequals to 8 nos. cam segment of single roll crusher for unit no. 5, front wear plate/anvil plate (part no.3) 1 set consists of 3 nos b front wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, back wear plate/plate combing (part no.6) 1 set consists of 3 nos back wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, side wear plate (part no.8) 1 set consists of 2 nos. left hand and 2 nos right hand type of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, shaft with shaft structure with shaft sleeve(part no.2 and15)for clinker grinder., bearing support (part no.8) of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, single roll crusher complete assembly without drive arrangement,fluid coupling,chain,drive and driven sprocket of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, feed sump of bottom ash system of unit - 5 as per drawing no. 95p10 - t - 1b - 711, complete assembly of feed gate housing with feedgate, access door for unit no.3 and 4, bearing housing of dcips make 33" x 30" clinker crusher/grinder, locking plate for 600 dia. round access door for bottom ash hopper, nozzle with ceramic tip(part no. 2)tip size- 36 mm of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), aligning ring(part no. 10)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), half clamp(part no. 11)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 9" flange clamp half (part no. 18) of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 8" jet pulsion pump complete assembly without tail pipe for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), nozzle with ceramic tip size 34 mm of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, aligning ring (part no.10) of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, half clamp (part no.11) 1 setequals to 2 nos of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, 9" flange clamp half (part no

corporations/Associations/Others

CTN :41086602

30 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of 100nb ss pipe, flange, bends and gate valves

State Government

CTN :40671293

18 Jul, 2025 27.11 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of coal inlet pipe with flange and ss centre sleeve suitable for 8.5 e 9 coal mill of unit no. 1 to 4, ph-i and ii, at sgtps, mppgcl, birsinghpur.

Central Government/Public Sector

CTN :41043922

01 Aug, 2025 3.80 Lacs

East Sikkim - Sikkim

Tender For supply of hardware material d d - cement , prepainted cgi sheet , prepainted plain sheet , rectangular pipe 80 , rectangular pipe 40 , ms flat , steel primer , cement primer , exterior emulsion paint , pvc pipe , waterproof shuttering plywood , 16 mm tor steel , 12 mm tor steel , 8 mm tor steel , bricks

Central Government/Public Sector

CTN :41055028

26 Jul, 2025 NA

Golaghat - Assam

Tender For providing of operation and maintenance of other machines and plants - operation and maintenance of other machines and plants - instrumentation contract for miscellaneous instrumentation jobs-10 installation of direct type pressure gauge, temperature gauge, rotameters, flow gauge,etc. including transportation from the wh/iw, necessary tubing, connection etc. but exclusive of supply of materials. 100 nos., 20 installation of direct type pressure transmitter, pressure switch, temperature switch, solenoid valve ( inch to 1 inch), ip converter, thermocouple, rtd, limit switch, position transmitter, vibration transmitter, proximity/ vibration probe, temp. transmitter,speed probe etc. including transportation from the wh/iw, necessary tubing, connection, cable glanding, ferruling, lugging etc. as applicable but exclusive of supply of materials. 320 nos., 30 installation of diaphragm/ remote seal type pressure gauges etc. with accessories including transportation from the wh/iw but exclusive of supply of materials. rating : upto 600# flange rating. 20 nos., 40 installation of diaphragm/ remote seal type pressure transmitter, pressure switch etc. with accessories including transportation from the wh/iw, mounting, connection, cable glanding, ferruling, lugging etc. as applicable but exclusive of supply of materials. rating : upto 600# flange rating. 20 nos., 50 installation of level switch, displacer type level transmitter etc. with accessories including transportation from the wh/iw, mounting, connection, cable glanding, ferruling, lugging/ termination etc. as applicable but exclusive of supply of materials. rating : upto 600 # flange rating. 10 nos., 60 installation of tank level transmitters radar/servo with accessories including transportation from the wh/iw, mounting, gi earthing,glanding,termination etc. but exclusive of supply of materials. 5 nos., 70 installation of instrument control valve with accessories including transportation from the wh/iw, mounting, tubing, connection, cable glanding, ferruling, lugging/ termination etc. as applicable but exclusive of supply of materials. valve size : upto 2"300# 20 nos., 80 cable laying testing of frls armoured power/control/signal cables made trenches,cabletrays, pullthrough pipes or exposed on wall. beam/rakes; trussestie/beam or embedded in floor. unit rates quoted for installation of cables shall be same irrespective of route and method of laying. the rates shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways and supply and installation of saddles, spacers and nylon chord for tying as required, identification tags at strategic points / every 50meter intervals, aluminium clamps with fasteners,etc. cable identification aluminium tags at strategic points/every 50meter interval for identification of cable;etc. complete. the straight through joints/tying with armour in the cables should be avoided and rate includes all leads and lifts from and to yard. meggaring to be done before laying of cables.laying of instrumentation/fo armoured cables/power cables including transportation,dressing , clamping (with aluminium clamp at 600 mm interval), tagging (engraved on ss plates with ss tiebelts), inclusive of supply of consumables like cable tie, aluminium clamp and cable tag : type and size: armoured , od : upto 0.5" ( approx.).exclusive of supply of cables, 22500 meter, 90 cable laying testing of frls armoured power/control/signal cables made trenches,cabletrays, pullthrough pipes or exposed on wall. beam/rakes; trussestie/beam or embedded in floor. unit rates quoted for installation of cables shall be same irrespective of route and method of laying. the rates shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways and supply and installation of saddles, spacers and nylon chord for tying as required, identification tags at strategic points / every 50meter intervals, aluminium clamps with

Central Government/Public Sector

CTN :41025993

31 Jul, 2025 NA

Bathinda - Punjab

Tender For supply of ctd bar 12 mm dia , ctd bar 16 mm dia , civ t tor steel 20 mm

CTN :40770192

18 Jul, 2025 49.32 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : supply of cistern low level pvc 9 or 10 ltr , stop cock cp 15 mm with female thread , sink kitchen ss with draining board , plate rack kitchen ss 36 inch x30 inch x10 inch , sink kitchen ss without draining bd 60hl size 610 mmx 460 mm , grating pvc dome type 125 mm , wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm alluminium alloy , pvc float valve 25 mm , commode seat cover for ewc with hinges colour white , stop cock concealed cp 15 or 20 mm , health faucet set with hook 15 mm for ewc , mixer basin central hole without pop up waste system , angle cock cp 15 mm with flange 2 way , bib cock cp long body 15 mm , soap dish holder ss , shower rose ss 95mmx65mmx15 mm dia , butt hinges ms medium weight cold rolled 150 mm , 3 in 1 wall mixture woth provn of hand shower , stop cock cp 15 mm with male thread , towel rail cp brass 20mm dia x 2 feet or 3 feet long , pillar cock cp brass 15 mm , bib cock cp with flange 15 mm , tower bolt 200 mm x 10 mm dia aluminium anodised , butt hinges aluminium alloy 100 mm long marked isi , complete internal fitting for single flush cistern 10 ltr capacity , bib cock brass with flange 15 mm , glass shelf corner with bracket 200 mm , shower arm cp 15 mm x190 mm long with wall flange , urinal pot porcelain 17 inch x 14 inch x 10 inch , butt hinges aluminium alloy 75 mm long isi marked , water closet indian type 500 or 550 mm complete , angle cock cp 15 mm with flange , stop cock ss 15 mm , glass shelf corner with bracket 300 mm , vitreous china wash down water closet pan , hand wash basin 22 inch x 16 inch without fittings , bathroom cabinet acrylic with mirror , butt hinges ms medium weight cold rolled 100 mm , mirror looking 60 cm x 46 cm x 5 mm thick , butt hinges aluminium alloy 50 mm , glass clear sheet shelf 120 cm x 60 cm x 3 mm thick , towel rail 3 or 4 inch x 18 inch pvc with clamp , shower rose cp 15 mm dia 100 mm long , towel ring ss , water closet european type , vitreous chinaware wash down water closet pan , sliding door bolt 200 x16 mm dia aluminium anodised , sliding door bolt 300 mm x 16 mm dia aluminium anodised , butt hinges ms medium weight cold rolled 65 mm , glass clear sheet 120 cm x 60 cm x 4 mm thick , spindle brass 15 mm dia for stop cock , towel rail 3 or 4 inch x 24 inch pvc with clamp , pipe aluminium anodised for curtain , butt hinges ms medium weight cold rolled 50 mm , grating cp ss dome type 100 mm , fevicol type synthetic rubber adhesive sr 998 , toilet paper holder ss , connecting pipe flexible pvc , sink kitchen ss without draining bd 60hl size 495 mmx 420 mm and bowl size 405 mm x 355 mm , vitreous china ware wash hand basin white flat back , ply wood 12 mm grade bwr type a , prelaminated particle bd 18 oblique 19 mm , mdf board 18 mm grade-i exterior , cool foam for sofa size 40 density , cushion cover of tapestry , lock 6 lever universal 75 mm wide , laminated decorative sheet , prelaminated particle bd 12 mm , slip on soft closing hinges for cabinet doors , anti termite terminator liquid or spray , multipurpose cubboard inner lock with three keys , handle cp fancy type 145 mm x 25 mm for table doors and drawers in good quality , smoke gray smooth and glossy for finishing enamel synthetic exterior under coating and finishing paint of size 1 ltr of is 2932 , black smooth and glossy for finishing enamel, synthetic, exterior under coating and finishing paint of size 1 ltr of is 2932 , fevicol type heatproof adhesive heatx , lock 6 lever multipurpose flat shape 50 mm wide for drawer oblique shutter , mirror for table dressing ladies 1250x380x5 mm , seat frame //bid details 2 / 87 made out of superior quality plastic for verandah chair , back rest frame made out of superior quality plastic for verandah chair , white smooth and glossy for finishing enamel, synthetic, exterior under coating and finishing paint of size 1 ltr of is 2932 , channel ball bearing for table executive drawer 450 mm , seat frame made out of superior qua

CTN :41076454

22 Jul, 2025 NA

Kolkata - West Bengal

Tender For supply of rechargeable | w emergcncy torch, steel inchi measuring tape, female urinal spill proof 1000 ml urinal for women & men pee funnel and long rain coat, hooded and good quality

CTN :40855719

16 Jul, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of 10 types of nuts : : - hex head nut , hex head nut , ss hex nut , nut selflock , self lock nut , self lock nut , self lock nut , hex hd nut with flange , hex hd nut with flange , hex head nut with flange

Tor Steel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector