Latest total containment vessel Tenders | Government total containment vessel Tenders

Central Government/Public Sector

CTN :45012920

04 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of screwless rail-mounted terminal block suitable for 2.5 sq. mm conductors, 2 in 2 out, disconnecting type, front entry, cage clamp, comprising of: (i) terminal block: 12 nos. (04 red, 04 yellow, 04 green); (ii) end plate: 02 nos. (iii) end stopper: 02 nos. (iv) carrier rail of dimension 35 mm %d7 7.5 mm, 1 mm thickness, unslotted, of length 1 metre. (v) marker strip for 12 terminal blocks, as per rdso spec. no. spn/189/2004rev. 2, and as applicable in irs-s-75/2006 rev. 2 & irs-s-23 [ warranty period: 30 months after the date of delivery ]

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

CTN :45063101

12 May, 2026 NA

Multi City - Multi State

Tender For supply of spark plug,ignition coil,ht lead,starting relay,fog light bulb 12v 70w,field coil,brush carrier,armature,regulator sr30,rectifier plate,fuel pump motor,bty lead,iac motor,joint assy universal,fan belt,fuel filter,oil filter,air filter,eng mtg pad,distance piece,check nut,locking plate,hub oil seal frnt and rear,knuckle brg,differential oil seal,gear box oil seal,tappet cover gasket

Central Government And Public Sector

CTN :44713562

12 May, 2026 NA

Angul - Odisha

Tender For corrigendum : supply of scrap conveyor link : : - carrier element 5m 810 7810 012 , carrier element 5m 810 7810 013 , chain pin as per drg 591 7721 006 , anti noise plate as per drg 591 7721 007 , dummy please do not quote for this item

CTN :44624116

12 May, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract with bhel for supply of spares - field controller:areca-iii , m/s bhel, hnk:valve spindle(rhs), assembly of gland ring exhaust pedestal, assembly of gland ring cover gen end, set of glands 30 mw tg, thermocouple drb-200 l=6000 part no. : ., thermocouple type-dra-300 hpt bearing pa, thermocouple for esv, rtd d-1;l=140mm,d=6mm,1/2"m, turb stm temp ,t/c, tc:b,l=375,d6mm,dup, thermocouple type b l=515, hpt brg mtl temp,t/c, turb/seal temp,t/c, hwm-846, t/c type-b;l=465mm;esv+hpcv, xrp883:journal shaft assy, complete flame scanner head assembly. pa, fibre optic cable for flame scanner part, lens barrel assembly for scanner part no, housing elet mod, connectors:connector prefab. cables 5mts, flame scanner lens part no. : - drg no., collimator assembly for flame scanner pa, compression spring for flame scanner, bhel-3:c3000spl-glvsw-mo-f2250mm:complet, bhel part iii:c3000-sv-sw-hw-f22 2":comp, bhel part iii:c3000-sv-sw-hw-f22,1":comp, bhel part iii:glv-c-1500-sw-hw a-1051":c, 2-c1500-sv-sw-hw-f22:comp. valve assy(hw, bhel part iii:c800-svsw-hw-a105sst1/2":c, bhel part iii:c2500-sv-sw-hw-f22,size 1", 25nb-c-800-hw:complete assy., bhel-4:2-c2500-glv-hw-sw-f22:complete as, bhel part iii:c1500-sv-sw-hw-f221-1/2":c, bhel part iii:c800-sv-sw-hw-a105-sst 2":, bhel part iii:glv-a-105-c1500-sw-1-1/2":, bhel part iv:c1500-sv-sw-hw-a105-1/2":co, bhel part iii:c1500-sv-sw-hw-f22 1":com, xrp883:multiport outlet and liners, xrp883:seal wear ring, xrp883:bull ring clamping ring(4 seg./se, xrp883:spring stud brg(wear sleeve), xrp883:bowl hub cover for bowl mill xrp-, xrp883:trunnion shaft end cap-thrust end, xrp883:trunnion shaft end cap-free end, xrp883:trunnion bushing retainer, xrp883:thrust plate-thrust end journal h, xrp883:thrust plate-free end, xrp883:trunnion shaft, xrp883:spring air seal cap, xrp883:spring stud brg.housing, xrp883:spring guide var-02, xrp883:spring housing cover var-02, xrp883:spring stud adapter, xrp883:spring preload stud var-02, xrp883:spring orifice plate, xrp883:journal pr.spring, xrp883:deflector blade, ref no: hy-308.0, xrp883:spring stud lock nut, xrp883:inverted cone spare, xrp883:stop bolt assembly, xrp883:upper journal housing, xrp883:lower journal housing, 50 pin scsi cable set,g/f, prefab i/o cable set,g/f, surge spprsr cn9067557145, wire wound resistor,cn9060372115, maxpac 37cond.ribb on cable assy. 84, res zero ohm 0.25w,dv0692305963, res mf 10m 1% 0.6w 50ppm,en7460190586, terminal block cbt250 ,cu7433498508, fuse base & carrier, tag boardassyly.with 5poles,d99260005501, electrnc componet:blank modules(48*24)mm, diode stud type 1400v; 95a, maxpac cable assy. 28" part no. : -d5945, ars100:valve stem, 250mw:screw cap soc pm10x20, 250mw:locking plate, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:rectangular wire 1.7x1.4, esv:piston, jacking oil system:jacking hose brg 5&6, jacking oil system:jacking oil hose brg-, xrp883:worm gear & worm shaft assy, 250mw:caf gasket, 250mw:gasket dia 1240/1172, s3, 250mw:o ring, 250mw:o ring, 250mw:gasket, esv:stud m30x150, esv:cap nut am 30, 250mw:governor impeller, 250mw:threaded bushing, over speed trip system:wheel, 250mw:clamping piece for 3l &3r, thri 108/44:sealing strip 8x2, l=750mm, 250mw:locking plate for 2l & 2r, 250mw:locking plate, insulator:bushing insulator, insulator:pin insulator, insulator:shaft insulator for esp, hnk:sealing ring (lip seal), cv & servomotor:plug with stem, gen(bhel-thri 86/35):sealing ring assy., xrp883:gearbox asy, wb-1e:complete assembly, bhel davr:pwr mdl 6qg12 3-ph 68912sss006, oil gun assy, bhel davr:pulse coupling stage mdlassy u, bhel davr:trfmr pwr 5kva 3ph ynyn0 220/4, bhel davr:res w.w 500w 5% 150r 50ppm, bhel davr:res ww 2k 5%25w pir25, bhel davr:mdl voltage level converter mo, bhel davr:distribution block 5way, colou, bhel davr:mdl 69203na1aa un0610av1, i/o, bhel davr:srg spr 150v-250v dc 3rt2916-1, bhel davr:shunt 50a/60mv; accy:0.5%, bhe

CTN :45044992

11 May, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of fan belt , armature , field coil , pinion , brush carrier , bush set , alternator regulator , rectifier plate , exhaust switch , starting relay 24 v , hub seal front and rear , clutch cyl r kit , sleeve cyl r kit , hub t nut bolt , needle roller brg , radiator assy , water pump , fan belt 1325 , elbow hose , cyl head gasket , fuel hose , banjo union , banjo bolt , rpm meter , temp gauge , oil pressure guage , dual fuel filter assy , thermostate assy , coolant hose , self starter

CTN :45045516

15 May, 2026 18.5 Thousand

Baramulla - Jammu And Kashmir

Tender For supply of front suspension bush e e - front suspension bush , rear door lock assembly , bush carrier plate , ball joint , differential bearing , steering rack end , hub bearing , hub seal

Central Government/Public Sector

CTN :45046330

21 May, 2026 3.99 Crore

Gurgaon - Haryana

Tender For providing of custom bid for services - camc of total containment vessel (tcv)

Central Government/Public Sector

CTN :45034344

09 May, 2026 NA

Bangalore - Karnataka

Tender For supply of fuse tb type-1 1in-1 out cbl upto 2.5 , fttb type-1 1in-1 out cbl upto 2.5 sqmm , fttb type-1 1in-1 out cbl upto 2.5 mm , fttb type-1 1in-2 out cbl upto 2.5 m , fttb type-2 1in-1 out cbl 4.0 sqmm r , fttbtype-2 1in-1 out cbl 4.0 sqmm bk , fttb type-2 1in-2 out cbl 4.0 sqmm , fttbtype-2 1in-2 out cbl 4.0 sqmm , 2posi plugin bridge for ftb cbl 2.5 sqmm , 2posi plugin bridge for fttb cbl 2.5 sqmm , end plate for feed through tb type-1 , end plate for fttb1in-1 out cbl 4.0 mm , end plate for fttb1in-2 out cbl 4.0 mm , end plate for fttb diode1in-1 out cbl , end plate for fttb 1in-1 out cbl 2.5 m , screwless end stop for fuse and feed tb , terminal marker for fuse tb 1-12 , terminal marker for fttb 1-14 , fttb with diode 1in-1 out cbl upto 2.5 , end cap for din rail 35 x 7.5 mm , terminal strip marker carrier

Central Government/Public Sector

CTN :44676245

11 May, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : tender for supply of osaero job work for manufacturing of 127 parts ref semfg857 d d -rod , lug , plate , rod , rod , terminal , bolt , bolt , lever , eye bolt , nut , bolt , eye bolt , eye bolt , eye bolt , eye bolt , lug , lug , pipe , pipe , pipe , nut , cup , bush , terminal , washer , washer , bush , flange , support , elbow , adapter , screw in pipe connection , pipe connection , flanged t-piece , flanged elbow , adapter , lever , lug , bush , bush , elbow , elbow , elbow , cross piece , adaptor , threaded elbow , bolt , flange , nut , flange , pipe connection , cross piece , valve , flange , cover , top cover , body , t-joint , angle , flange , flange , pipe connection , flange , flange , pipe connection , angle , nut , flange , body , nut , bolt , axis , flange , nut , flange , end piece , angle , carrier , carrier , stopper , pipe , nut , fitting , flange , adapter , pipe connection , flange , plug , pipe connection , flange , flange , ring , body , ring , bush , nipple , flange , flange , plate , knob , special bolt , bracket , union nut , body , support , nut , nipple , nipple , nut , ring , ring , ring , flange , nipple , elbow , flange , body , body , clamp , eye bolt , cross piece , flange , elbow , link , axis (throttle assembly) , tee-piece

Total Containment Vessel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector