Latest tower bolt Tenders | Government tower bolt Tenders

Corporations/Associations/Others

CTN :43186013

17 Jun, 2026 15.00 Lacs

Washim - Maharashtra

Tender For corrigendum : supply of handpump material - supply of handpump material and bleaching powder - hand pump pipe coupling g. i 32mm. connecting rod of hand pump 43 meters coupling of connecting rod of hand pump ermm.m. hand pump head assembly with hand pump cylinder assembly water chamber of hand pump hand pump handle assembly hand pump bearing 6204 (isi mark) hand pump axle nut with bolt hand pump chains hand pump cylinder cap hand pump chain nut bolts (per kg) foundation of hand pump upper valve assembly of hand pump hadapampache upper whale guide cucumber lower valve assembly of the head pump

State Government

CTN :45290539

08 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For hand pump spares parts isi mark and conforming to is 15500 2021 (part 1 to 8) (with up to date amendment) - prevailing torque type steel hexagonal nutm10x1.5 is:7002, ball bearing 20 bc02pp is:6455, bolts for cover m 12x20 is:1363, washer for axle to suit m-12 is:2062, high tensile bolt m-10x40mm is:1364 part-i, hexagonal bolt m12x1.75x40 is:1363 part-i, hexagonal nut m12x1.75 is:1364 part-3, hexagonal coupler m12x1.75x50 is:15500 part-4, long bolt m12x1.75x20 for extra deep well is:1363 part-i, reducer cap painted for mark ii & extra deep well hand pump i.s.i. mark - 0.880 kgs approx., cylinder body with brass liner for deep well pump isi mark. - 2.50kgs approx., cylinder body with brass liner for extra deep well and vlom pump isi mark. - 3.20 kgs approx., plunger yoke body for all types of pumps i.s.i. mark. -0.260 kgs approx., spacer for nitrile rubber pump bucket for all types of pumps i.s.i. mark.-0.210kgsapprox., follower for mark-ii deep well i.s.i.mark.- 0.280kgs approx., follower for extra deep pump i.s.i.mark.- 0.370kgs approx., check valve seat for mark ii & extra deep well i.s.i. mark.- 0.210 kgs approx., check valve for mark ii & extra deep well i.s.i. mark, rubber seat retainer for mark ii & extra deep well 0.080 kgs approx., lowerspacerforextradeepi.s.i.mark.-0.200kgs approx., chain with coupling for all types of pumps i.s.i. mark.-0.550kgsapprox., front cover hot dip galvanized for all types of pumps i.s.i. mark.-1.230 kgs approx., bearing spacer for axle for all types of pumps i.s.i. mark, third plate galvanized for all types of pump i.s.i. mark. -1.400kgs approx., connecting rod for all types of pumps i.s.i.mark.-2.7kgsapprox., washer electro - galvanized i.s.i. mark, stand galvanized normal isi mark ii & vlom i.s.i. mark.-17.900 kgs approx., stand galvanized telescopic for marks & vlom i.s.i. mark.-19.750 kgs approx., stand galvanized normal for extra deep well i.s.i. mark.-18.700 kgs approx., stand galvanized telescopic for extra deep well i.s.i.mark.-20.500kgsapprox., handle comprising handle bar, bearing housing & chain guide for mark ii & vlom i.s.i. mark, handle comprising handle bar, bearing housing & chain guide for extra deep i.s.i. mark, t bar for extra deep well i.s.i. mark, counter weight for extra deep i.s.i. mark. -12.00 kgs approx., water tank complete for mark ii deep well & extra deep well hand pump i.s.i. mark. - 7.80 kgs approx., head complete for mark ii & vlom i.s.i. mark.-10.220 kgs approx., head complete for extra deep well i.s.i. mark.-10.150 kgs approx., s.s. handle axle for all types of pumps i.s.i. mark.-0.350 kgs approx., s.splungerrodformarkiii.s.i.mark.-0.430kgs approx., s.s. plunger rod for vlom & extra deep well i.s.i. mark.- 0.470 kgs approx., rubber seating for upper valve for all types of pumps i.s.i. mark, pump bucket of nitrile rubber for all types of pumps i.s.i. mark, rubber seating for lower valve for mark ii & extra deep i.s.i. mark, sealing ring for mark-ii & extra deep well i.s.i. mark, head assembly complete with handle assembly, for mark ii & vlom isi mark., head assembly complete with handle assembly for extra deep isi mark, handle assembly complete for mark ii deep well & vlom pumps isi mark.-10.250 kgs approx., handle assembly complete for extra deep well hand pump isi mark. -15.350kgsapprox., cylinder assembly complete for mark ii deep well hand pumps isi mark.-6.10kgs approx., cylinder assembly complete for extra deep hand pump isi mark.-7.00kgsapprox., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve, spacer follower pump bucket & upper value seating for mark ii deep well hand pump consisting of isi mark spares., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve both spacers, follower pump bucket & upper value seating for extra deep well hand pump consisting of isi mark spares., check valve assemb

State Government

CTN :45304203

08 Jun, 2026 8.33 Lacs

Umaria - Madhya Pradesh

Tender For procurement of spares for dewatering pumps make-maxflow pumps type 50-smp1 installed at fuel oil unloading pump house at unit no. 1 and 2 sgtps mppgcl, birsinghpur - as per schedule, strainer, suction cover, pressure body, impeller (semi - open), impeller nut, impeller key, pump shaft, block, seal plate, oil seal, block bush, top spider, line spider, top spider bush, line spider bush, line shaft, top shaft, pump shaft coupling, bearing sleeve, ratchet plate, grease nipple, pump coupling, ratchet pin, top adjusting nut, coupling rubber, motor coupling, line shaft coupling, gasket, suspension pipe, delivery pipe, .

Central Government/Public Sector

CTN :45287663

03 Jun, 2026 NA

Noida - Uttar Pradesh

Tender For supply of spares and servicing of ht pumps-04 nos of make- beacon weir ltd for ash water recirculation system of barh stpp stage-i (3x660mw) - supply of spares & servicing of ht pumps, spacer sleeve, bearing housing de, bearing housing nde, bering cover de, bearing cover nde, stuffing box bush de, stuffing box bush nde, stuffing box packing, stuffing box gland, lantern ring, water thrower, cylindrical roller bearing, thrust ball bearing, impeller key, coupling key, shaft nut, o ring for water throiwer, grease nipple, servicing charges

Central Government/Public Sector

CTN :45147870

28 May, 2026 NA

Medak-T - Telangana

Tender For corrigendum : supply of hy8110300545_hoist coupling bolt as per drawing number 4_rs_5174 with suitable nut and washer , hy8110300529_lt coupling bolt as per drg number 4_rs_5174 with suitable nut and washer , hy8110300510_lt coupling bolt as per drg number 4_rs_5174 with suitable nut and washer , hy8110120539_lt and ct coupling bolt of cranes as per drawing number 4_rs_5543 with suitable nuts and washers , hy8110159834_lt coupling bolt of crane as per drawing number s_888 with suitable nuts and washers , hy8110159842_hoist coupling bolt of crane as per drawing number s_2447 with suitable nuts and washers , hy8110159850_gear coupling bolt of cranes as per drawing number s_373 with suitable nuts and washers , hy8110159869_lt coupling bolt of crane as per drawing number s_2515 with suitable nuts and washers , hy8110159877_ct coupling bolt of crane as per drawing number s_2515 with suitable nuts and washers , hy8110159885_ah coupling bolt of crane as per drawing number s_1396 with suitable nuts and washers , hy8110159893_hoist coupling bolt of crane as per drawing number 4_rs_5169 with suitable nuts and washers , hy8110159249_ah coupling bolt of cranes as per drawing number 4 rs_5172 with suitable nuts and washers , hy8110159214_mh coupling bolt of cranes as per drawing number 4_rs_5172 with suitable nuts and bolts , hy8110159907_lt_a is equals to 101_ coupling bolt as per drawing number 4_rs_5170 with suitable nuts and washers , hy8110159230_ah and ct coupling bolt of cranes as per drawing number 4_rs_5170 with suitable nuts and bolts , hy8110159915_lt_a is equals to 104_coupling bolt as per drawing number 4_rs_5170 with suitable nuts and washers , hy8110159273_mh coupling bolt of cranes as per drawing number s_886 with suitable nuts and washers , hy8110050557_ct coupling bolt of cranes as per drawing number 4_rs_4878 rev_01 with suitable nuts and washers , hy8110159923_hoist coupling bolt of crane as per drawing number s_1449 with suitable nuts and washers , hy8110159931_sl number 1 coupling bolt as per drawing number s_2776_01 with suitable nuts and washers , hy8110159940_sl number 2 coupling bolt as per drawing number s_2776_01 with suitable nuts and washers , hy8110159290_lt coupling bolt of cranes as per drawing number 4 rs_6670 with suitable nuts and bolts , hy8110152074_coupling bolt and nut for half gear coupling number 101 , hy8110152082_coupling bolt and nut for half gear coupling number 102 , hy8110151736_ct coupling bolt as per drg_4_rs_5175 with suitable nuts and washers , hy8110151744_lt coupling bolt as per drg_4_rs_5177 with suitable nuts and washers , hy8110152325_ct coupling bolt as per drg_4_rs_5177 with suitable nuts and washers

State Government

CTN :45301090

26 May, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of bottom ash hopper and feed gate related spares in unit-3 coh at ahp 210mw, cstps, chandrapur. - ahp basys fdgate guide angle, bhel seal trough flushing nozzle small, ahp basys hop hopper flushing nozzle, ahp basys cg chamber glass, hose,flex ss corrugat,1/2" bsp(f) l 0.5m, ss corrugated 1/2" bsp (f) l 0.7 m, ball valve cs comp asly size-25 mm, body cs complete ball valve 15 mm, ball body cs comp vlv 1 / 2", ball valve cs comp asly size-50 mm, lubricant, coolant audco sealant 731-a, lubricant, coolant audco sealant 731-b, lubrcnt grease audco sealant 731-d, nut bolt for 200 nb sleeve, sleeve coupling 200 nb ms coupling set, shaft sleeves set complete

State Government

CTN :45287297

11 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of drive mechanism spares required for air preheater of u#3 boiler during coh at cstps, chandrapur. - blr regah 0 0 bibby coupling: 124a, blr regah 0 0 bibby coupling: 124c, regen aph 5 apc speed reducer brg set, blr regah 0 0 fluid coupling fcu: 11.5, blr regah 0 0 fusible plug, blr regah 0 0 multidisc plate, blr regah 0 0 nut bolt set for coupling, blr regah 0 0 resilient plate, blr regah 0 0 input shft for gearbox, reg aph 2nd stage pinion shaft, reg aph spiral bevel pinion shaft, reg aph spiral bevel gear, reg aph low speed shaft, reg aph 1st stage pinion shaft, taper lock bush for 5apc main drive gear

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

corporations/Associations/Others

CTN :45303117

08 Jun, 2026 3.51 Lacs

Aligarh - Uttar Pradesh

Tender For tender for supply of acid unloading pump spares - e acid unloading pump (h2so4) with mechanical seal (with base plate) , model no.cpc 40/200 , pump shaft , part no 22.3 , moc aisi 410 for model no. cpc 40/200 , size65x40 , shaft sleeve/53.5 moc-aisi410 , for model no. cpc 40/200 , size65x40 , volute casing , part no.-11.4 , mpc is 210 fg 260 , model no. cpc 40/200 , size65x40 , casing cover17.3 for acid unloading pump (h2so4) moc is 210 fg 260 , model no. cpc 40/200 , impeller /24.2 mpc is 210 fg260.model no. cpc 40/200 , size65x40 , capacity15m3/hr , flat gasket (washer) / 41.03 moc teflon for model no. cpc 40/200 , size65x40 , capacity15m3/hr , flat gasket (washer) /41.04 moc teflon for model no. cpc 40/200 , size65x40 , capacity15m3/hr , key (coupling) / 95.2 , moc bs 970 en 8 , for model no.- cpc 40/200 , size65x40 , capacity15m3/hr , impeller nut - 93.4 moc aisi-316 for model no. cpc 40/200 , size-65x40 , capacity15m3/hr , helicoil insert/94.21moc stainless steel for model no. - cpc 40/200 , size-65x40 , capacity-15m3/hr , wear ring (casing) - 51.4 moc 210 fg 260 for model no. - cpc 40/200 , stud casing 91.4 pump type - cpc 40/200 , deflector/51.9 moc ais304 pump type - cpc 40/200 , size-65x40 , capacity-15m3/hr , total head - 10m , speed -1415 rpm , circlip 94.23 moc spring steel for model no. - cpc 40/200 , size-65x40 , capacity-15m3/hr , coupling set (l 100) material is 210 fg 260 for model no. - cpc 40/200 , key( impeller)95.03 model no. - cpc 40/200 , mechanical seal assembly set make leak proof for model no. - cpc 40/200 , constant level oiler / 64.1 model no. - cpc 40/200 , hex cap screw moc ts 1363 ms for mode no. - cpc 40/200 , oil seal moc -synthetic rubber for mode no. - cpc 40/200

corporations/Associations/Others

CTN :45303192

08 Jun, 2026 5.55 Lacs

Aligarh - Uttar Pradesh

Tender For tender for supply of back wash pump spares -lock nut (shaft) , moc bs 970 en-8 , part no.-93.153 , model- vo 80/230+tch+n , lock washer (shaft) , part no.-94.053 , moc is 226 c15 , model- vo 80/230+tch+n , lock nut (brg. collar) , part no.-93.152 , moc bs 970 en-8 , model- vo 80/230+tch+n , lantern ring , part no.-46.10 , model- vo 80/230+tch+n , gland ring , part no.-46.9 , moc is 318 gr2 , model- vo 80/230+tch+n , circlip of backwash water pump (filters) moc is 3075 1965 model- vo 80/230+tch+n , drive shaft of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , line shaft of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , pump shaft of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , coupling ring of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , coupling nut of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , coupling sleeve of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , bush bearing (star) of backwash water pump (filters) moc cutless rubber with bronze sleeve , model- vo 80/230+tch+n , moc cutless rubber with bronze sleeve bush bearing (pump) of backwash water pump (filters) , model- vo 80/230+tch+n , shaft sleeve (p. end) of backwash water pump (filters) moc aisi-410 , model- vo 80/230+tch+n , impeller nut of backwash water pump (filters) moc aisi-316 model- vo 80/230+tch+n , gasket (impleller) of backwash water pump (filters) moc teflon , model- vo 80/230+tch+n , gasket (impleller nut) of backwash water pump (filters) moc teflon , model- vo 80/230+tch+n , complete cooling water pipe line set with conneters at both end (lubrication pipe line) moc-aisi-30 4.model- vo 80/230+tch+n , star support for back wash pump pump moc-is-210fg260 , type- vo 80/230+tch+n , size-100x80 , , bush housing/17.5 of vo 100/400 + cpc pump moc-2%ni.cl , type- vo 80/230+tch+n , size-100x80 , , bearing coller/53.952 of vo 100/400 + cpc pump moc-is 226 c15 , model- vo 80/230+tch+n , make-sam turbo pvt. ltd. , , model- vo 80/230+tch+n vo 100/400 + cpc pump make-sam turbo pvt. ltd.bearing cap/37.052 of mocis 210 fg 200 , adjusting screw/91.19 moc-is 1363 ms , model- vo 80/230+tch+n , make-sam turbo pvt. ltd. , drive column pipe moc is 1239 part i heavy for type- vo 80/230+tch+n , size-100x80 , back wash pump , line column pipe moc is 1239 part i heavy for type- vo 80/230+tch+n , size-100x80 , back wash pump , pump column pipe moc is 1239 part i heavy for type- vo 80/230+tch+n , size-100x80 , back wash pump , volute casing , part no.-11.4 , moc -2% ni.ci to is 210 fg 260 (300 bhn) model- vo 100/400+tch+n , make-sam turbo pvt. ltd. , complete pump drive coupling set (dia-220) moc-is210fg260 of vo 100/400 + cpc pump , bearing housing/36.052 moc-is 210 fg 200 of vo 100/400 + cpc pump , impeller /24.2 moc-2.0%nici to is 210 fg 260 type-vo 100/400 + cpc pump

Tower Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors