Latest towing bar Tenders | Government towing bar Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :45024390

25 May, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of 214 1805032 b1 cap gasket , 10315923 lv7 krz 255b 3901651 wrench for lifting spare wheel assy , 10316571 lv7 itr beml 5120 007052 spanner open jaw fixed 46 , 10312796 lv7 itr beml rtso 115500 spanner segp 55 , 10313475 lv7 itr beml rtto 314510 ratchet handle 20 to is 7975 pt 2 1991 , 10527261 43 i 43 akl b 6518577 push tap seal , 10517805 43 i 43 akl b6518515 pump assy , 10386612 k7 4210 001665 bucket canvas mk 6 without lid 18 ltrs , 10377795 k7 4210 000140 round nose shovel size 330 x 270 mm , 10383317 k7 ikg bum bur 22 44 fire hook 3 5m , 10311354 lv7 itr beml 50 223 91 indicator light holder 24v 21w bulb , 10317938 lv7 itr beml 50 380 32 mm nominal bore pipe 1000 mm long , 10336896 lv7 t 815 443 400 432 000 cable 2159 80 01 0750 , 10361354 lv7 av 15 388 438 111 110 air pressure gauge with bag , 10344689 lv7 av 15 443 312 304 109 tail light , 10340086 lv7 t 815 4820 057572 valve plug 150 181 014 004 , 10565135 lv7 t 815 319 411 038 999 neck js 8 csn 13 7850 , 10324128 lv7 t 815 207 902 471 4 fuel filter cable , 10354396 lv7 t 815 442 076 852 704 line to b cyl , 10344666 lv7 t 815 548 615 090 0 tie rod 183 m tt 75 5400 , 10340206 lv7 t 815 130 050 270 484 ball socket , 10313806 lv7 t 815 130 054 391 164 threadle lining , 10320940 lv7 t 815 207 532 012 4 control cylinder , 10614860 lv7 t 815 990 115 009 000 shaft 19024394 , 10325112 lv7 t 815 442 076 852 694 line to b cyl , 10311954 lv7 t 815 131 612 085 000 two way valve 434 208 0290 , 10319637 lv7 t 815 2520 012969 hydraulic coupling cover , 10328598 lv7 t 815 443 441 288 800 revolution counter drive , 10342350 lv7 t 815 443 854 190 001 starter motor push button , 10343525 lv7 t 815 443 853 071 000 switch of stop engine , 10331373 lv7 t 815 130 050 420 074 ball bush , 10346713 lv7 t 815 130 076 852 814 line to air reservoir , 10614925 lv7 t 815 442 074 918 514 air manifold frame , 10332123 lv7 t 815 358 821 004 000 valve ecrh em2 v 24 , 10325795 lv7 t 815 207 200 124 4 propeller shaft , 10342926 lv7 t 815 443 861 021 000 switch box 9502 , 10322848 lv7 t 815 tpe sv 166 76 l 60 rubber hose l 60 , 10331706 lv7 t 815 443 414 016 000 volt meter vdo 332 040 001g , 10349017 lv7 t 815 130 076 855 594 union pipe 130 076 855 594 , 10339678 lv7 t 815 341 413 181 000 jump start cable ve 5 meter , 10339653 lv7 t 815 337 261 130 201 pneumatic valve , 10358316 lv7 t 815 201 152 057 4 camshaft , 10331826 lv7 t 815 443 612 234 0 brake cylinder 22 24 by 9452 ko16929 , 10346717 lv7 t 815 130 016 940 334 control rod , 10325079 lv7 t 815 443 322 003 000 horn 9419 00 , 10319679 lv7 t 815 993 200 780 0 stator , 10331144 lv7 t 815 443 614 002 800 compressor 4102 , 10329902 lv7 t 815 4x4 131 654 129 000 hose ab 309 8x710 zvs pn 21 310 , 10321392 lv7 t 815 4x4 007 400 020 307 tyre pressure gauge valve 0 10 kg cm2 , 10322839 lv7 t 815 4x4 442 073 560 374 handle assy for spare wheel , 10331884 lv7 t 815 4x4 612 229 186 000 rest brake shoe perrot 13 229 186 , 10330057 lv7 t 815 4x4 131 654 130 000 hose ab 309 8x800 dkl dkl pnd 21 310 , 10327447 lv7 t 815 4x4 443 400 413 000 pressure switch 5 5 bar 151 011 , 10315893 lv7 t 815 4x4 432 410 020 200 insert wabco , 10331773 lv7 t 815 4x4 443 839 007 000 relay v231 a 0053 c 643 , 10316050 lv7 t 815 4x4 442 013 560 244 hydraulic clutch carrier , 10329891 lv7 t 815 4x4 //bid details 2 / 140 443 820 005 000 towing bar , 10531067 lv7 t 815 hmv 131 612 218 000 releif valve vpc 4a 7 4 bar , 10516988 lv7 t 815 hmv 442 075 065 244 adapter , 10526197 lv7 t 815 hmv 990 100 849 000 nozzle dop 140 s 624 411868041 18 , 10345231 lv7 t 816 443 999 226 0 brake shoe parrot 12 155 492 , 10341794 lv7 t 816 297 307 531 4 side indicator rh , 10306876 lv7 sca 804870 o ring , 10301240 lv7 sca 258915 inspection glass , 10305814 lv7 sca 232550 connector , 10307156 lv7 sca 371495 gasket , 10301132 lv7 sca 351197 gasket , 10303587 lv7 sca 385997 gasket , 10304903 lv7 sca 255940 bushing , 10306080 lv7 sca 124982 gasket , 10305738 lv7 sca 257829 hose , 10300807 lv7

corporations/Associations/Others

CTN :45113968

27 May, 2026 10.76 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of inboard seal leaf he sh 2.5x145x1295mm , inboard seal leaf ce sh 2.5x145x1295mm , inter seal leaf sh 2.5x145x1150mm , outboard seal leaf ce sh 2.5x145x543mm , outboard seal leaf he sh 2.5x145x543mm , inboard holding strip ce sh 2.5x80x1195 , inter holding strip sh 2.5x80x1050mm , outer holding strip sh 2.5x80x590mm , inboard holding strip he sh 2.5x80x805 , inboard diaphrgm seal he sh 2.5x93x1295 , inboard diaphrgm seal ce sh 2.5x93x1295 , outer seal tab sh 2.5x56x100mm , diaphragm sealceandhe sh 2.5x93x1150mm , t bar tab sh 3.15x20x45mm aph27vimt2000 , outer seal tab pl 6x56x150mm , holding strip ce sh 2.5x65x1132.5mm , holding strip he sh 2.5x65x1167.5mm , seal tab he and ce sh 2.5x60x82mm , seal tab sh 2.5x60x120mm , soot blower nozzle aph27vitm2000 , air breather bsp , t bar cold end aph27vimt2000 , t bar hot end aph27vimt2000 , holding strip seal sh 2.5x104x909mm he , bypass seal he sh 1.6x238x914mm , bypass seal ce sh 1.6x181x914mm , inboard spacer bar he pl 10x60x805mm , inboard spacer bar ce pl 10x60x1195mm , inter spacer bar pl 10x60x1050mm , outer spacer bar pl 10x60x820mm , rotor post seal he pl 6x120x1120mm , rotor post seal ce pl 6x185x1120mm , prv lube oil line 20mm , rotor angle he aph27vitm2000 , bypass angle aph27vitm2000 , kaowool 1x4x25 , air motor silencer , spool machined ring , lga rope gr iii sq 20mm is 4687 , bibby resilient coupling type 124 a , bibby coupling type 124 a spring , axial seal leaf ce sh 2.5x100x1132.5mm , axial seal leaf he sh 2.5x100x1167.5mm , soft touch radial seal aph27vitm2000 , hot end spool aph27vitm2000 ) /bid number : gem/2026/b/7479274 * /dated: 07-05-2026 & & / bid document 1 / 33

CTN :45281239

11 Jun, 2026 NA

Jamnagar - Gujarat

Tender For supply of towing bar

Central Government/Public Sector

CTN :44933474

10 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of rotor bar for scheme-1 rotor,drg.skel-4740 alt-3 or latest, spec no. rdso/2008/el/spec/0063(rev-4) or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45271025

10 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of rotor bar for scheme-1 rotor,drg.skel-4740 alt-3 or latest, spec no. rdso/2008/el/spec/0063(rev-4) or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45252333

09 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

corporations/Associations/Others

CTN :45237112

02 Jun, 2026 21.71 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of he rotor post seal (3021-01) for primary aph 26-vix-1625 , he radial seal inner (3021-02) sty-1 for primary aph 26-vix-1625 , he radial seal inner (3021-02) sty-2 for primary aph 26-vix-1625 , he radial seal interm (3021-03) for primary aph 26-vix-1625 , he radial seal out (3021-04) sty-1 for primary aph , model-type-26-vix-1625 , he radial seal out (3021-04) sty-2 for primary aph , model-type-26-vix-1625 , he radial holding strip inner (3021-05) for primary aph 26-vix-1625 , he radial holding strip interm(3021-06)for primaryaph 26-vix-1625 , he radial holding strip outer(3021-07) for primary aph 26-vix-1625 , he outer sealing tab (3021-8) for primary aph 26-vix-1625 , he outer seal tab(3021-09) sty-1for primary aph , model-type-26-vix-1625 , he outer seal tab(3021-09) sty-2 for primary aph , model-type-26-vix-1625 , he bypass seal (3021-10) for primary aph 26-vix-1625 , he bypass holding strip (3021-11) for primary aph 26-vix-1625 , he axial seal 3021-12 style-1 for primary aph 26-vix-1625 , he axial seal 3021-12 style-2 for primary aph 26-vix-1625 , he axial holding strip 3021-13 for primary aph 26-vix-1625 , hot end (he) static seal plate for paph , material-carbon steel , ce radial post seal 3021-19 for primary aph , ce radial seal inner (3021-20) sty-1 for primary aph 26-vix-1625 , ce radial seal inner (3021-20) sty-2 for primary aph 26-vix-1625 , ce radial seal interm 3021-21 for primary aph 26-vix-1625 , ce radial seal outer 3021-22 sty-1 for primary aph 26-vix-1625 , ce radial seal outer 3021-22 sty-2 for primary aph 26-vix-1625 , ce radial holding strip inner 3021-23 for primary aph 26-vix-1625 , ce radial holding strip interm 3021-24 for primary aph 26-vix-1625 , ce radial holding strip outer 3021-25 for primary aph 26-vix-1625 , ce outer seal tab 3021-26 for primary aph 26-vix-1625 , ce outer seal tab 3021-27 for primary aph 26-vix-1625 , ce bypass seal 3021-28 for primary aph 26-vix-1625 , ce bypass holding strip 3021-29 for primary aph 26-vix-1625 , ce axial seal (3021-30) sty-1 for primary aph 26-vix-1625 , ce axial seal (3021-30) sty-2 for primary aph 26-vix-1625 , ce axial holding strip 3021-31 for primary aph 26-vix-1625 , cold end (ce) static seal plate for paph , model- 26-vix-1625 , material-carbon steel , machined t -bar , seals for primary aph , model- type-26-vix-1625 , rotor angle 30 deg for primary aph 26-vix-1625 , bypass angle 26-vix-1625 60 deg , carbon ring with spring for primary aph 26-vix-1625 , he rotor post seal 3022-01 for secondary aph 30-vix-2300 , he radial seal inner 3022-02 style-1 for secondary aph 30-vix-2300 , he radial seal inner 3022-02 style-2 for secondary aph 30-vix-2300 , he radial seal interm 3022-03 for secondary aph 30-vix-2300 , he radial seal out 3022-04 sty-1 for secondary aph 30-vix-2300 , he radial seal out 3022-04 sty-2 for secondary aph 30-vix-2300 , he radial holding strip interm3022-05 for secondaryaph 30-vix-2300 , he radial holding strip interm 3022-06 for secondary aph 30-vix-2300 , he radial holding strip outer 3022-07 for secondary aph 30-vix-2300 , he outer seal tab 3022-08 for secondary aph 30-vix-2300 , he outer seal tab 3022-09 style-1 for secondary aph 30-vix-2300 , he outer seal tab 3022-09 style-2 for secondary aph 30-vix-2300 , he bypass seal 3022-10 for secondary aph 30-vix-2300 , he bypass holding strip for secondary aph 30-vix-2300 , he axial seal 3022-12 style-1 for secondary aph 30-vix-2300 , he axial seal 3022-12 style-2 for secondary aph 30-vix-2300 , he axial holding strip 3022-13 for secondary aph 30-vix-2300 , hot end (he) static seal plate for saph , model- 30-vix-2300 , material-carbon steel , ce rotor post seal (3022-19) for secondary aph 30-vix-2300 , ce radial seal style-i for secondary aph 30-vix-2300 , ce radial seal style-ii for secondary aph 30-vix-2300 , ce radial seal interm 3022-21 for secondary aph 30-vix-2300 , ce radial seal outer 3022-22 style-1 for secondary aph 30-vix-2300 , ce radial seal outer 3022-22 st

CTN :45227587

17 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of rotor bar for scheme-i rotor, drg. no. skel-4740 alt-3, specification no. rdso/2008/el/spec/0063/rev-4, str no. clw/tm/ 9039 rev-1 [ warranty period: 30 months after the date of delivery ] ]