Latest tpmo Tenders | Government tpmo Tenders

Central Government/Public Sector

CTN :44478967

27 Mar, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of moulded earthing terminal block with three terminals as per drg no 24993000012 rev-04a item 01 & 02

Central Government/Public Sector

CTN :44464857

23 Mar, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s scrap traction motor (type hs-15250) without pinion earthing brush assembly and connection terminal, qty-20 nos, location- near canteen loco motive care centre ratlam. mode of delivery in number basis and on as is where is basis, custodian sse-dl-rtm, fdp-50 days. note- this lot consisting traction motors numbering sr. no. 31 to 50 by color paint.

corporations/Associations/Others

CTN :44111193

16 Mar, 2026 10.00 Lacs

Saharanpur - Uttar Pradesh

Tender For corrigendum : t-45/hgd/2025-26 - part-a:- dismantling of existing electrical wiring and comprehensive rewiring at hgc, hgd khara office and 11/0.415 khara hydel colony substation, badshahibagh. part-b:- overhauling of 05 nos. 33kv tpmo installed at diesel power house, khara-

CTN :44411134

27 Mar, 2026 30.00 Lacs

Surat - Gujarat

Tender For work of transformer pic earthing , ht & lt terminal protector & providing and fixing of fibre-reinforced polymer (frp) type bird guard for magdalla & all sub-division under piplod division.

Central Government/Public Sector

CTN :44432724

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - cond & u/s aluminium scrap including chequered sheets/plates in full/part/broken/damaged, strips, re drums, pneumatic valves,pulleys, lp piston, levelling valves,acsr conductor,escalator wheels, bow assembly, horns, doom covers,radiators, pistons,pneumatic cylinder,pneumatic valve, turbo ventilator, engine & compressor heads& parts,acsr earth wire, bfb steady arm, aluminium extension ladder, 6 quad jointing kit, steady arm bfb size, anti wind clamp, strain clamp,reflective number plate,release aluminium ports steady arm, a clamp base, 3pulley w/o bearing, bus bar and connectors w/o bolts,aluminium ladder extension ,aluminium duct cover package ac unit,auto clave pressure cooker,anti wind clamp,steady arm eye piece,steady arm diff size,aluminium door frames,aluminium channel with door,steady arm, a clamp base, 3 pulley w/o bearing, busbar and connectors,water manifold for drt,water manifold for srt,levelling instrument, theodelete,aluminium items(street light, pit/cat light, flood light, fan blade),air equipment including air brake equipment,aluminium parts steady arm, a clamp base, 3 pulley w/o bearing,aluminium ladder,steady arm, a clamp base and connectors,anti winding clamp,steady arm diff sizes,aluminium feeder wire, rice filter (aluminium), contractor cylinder, anti wind clamp, steady arm, ael, mcp lp piston (aluminium with ferrous attachment), ac axial flow fan single phase of air flow, zs coupler plug and socket, aluminium ladder window frame, housing complete for earthing brush assembly, 125 a metal clad plug 5 pin, pedal switch parts, aluminium ladder cut pieces, aluminium rod, a clamp, steady arms, anti wind clamp, hydraulic door closer,ucb base, ct box, ladder,impellers, angles, beedings, one guarded plates, aluminium anodized plates, kf cooling fan, aluminum box, coach door, kettel, aluminium rope, aluminium ohe spare, inter cooler guard, aluminium bus bar of various sizes, aluminium bus splices and released aluminium terminal connectors of sorts and sizes, mu/ivc coupler, ivc housing,heat sink,spacer ring, arker hood, winch set, pulley set, signal aspect, tail lamp, aspect hood ring, tail lamp, strret light fittings, gauge cum level, emu main compressor parts, ivc cover, wgr cylinder, cylinder cap, t switch cylinder, switch plates, template for shutter cleance, boom, bushes, feeder wire without insulation, various air filters, doom cover, gutter, pulley, a clamp, fuel gauge, piston gauge, signal route indicator and,flash lights and different kinds of pneumatic valves, loco parts and all other aluminium scrap nature items available in the lot with/without brass/ferrous/glass attachments, as is where is condition.note:segregation and removal of any sorts of attachment is not permitted. note: crane/jcb loading is permitted. location: baskar bay bin 15

Central Government/Public Sector

CTN :43698963

17 Mar, 2026 2.99 Crore

Poonch - Jammu And Kashmir

Tender For corrigendum : provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, brea

Central Government And Public Sector

CTN :44300283

24 Mar, 2026 8.70 Lacs

Kargil - Jammu And Kashmir

Tender For supply of 3pin plug top 16 amp , 18 w led bulb , halogen lamp 1000 watt , elmoluft alkide varnish , epoxy red gel , thinner 221 , hardner for red gel eh 411 , modular socket 15 or 16 amp , electrical insulation paint becktol grey , 1 point 5 volt aaa size lr6 rechargeble battery , 1 point 5 volt aa size lr6 rechargeble battery , rechargeble battery pp3 alkaline 9v , rechargeable led torch light , extension board 16a 3 socket 6 and 16a with switch and 10mtr cable with earthing , panel lock , led driver 120w 6a , led driver 150w 7a , pvc gang box 16 amp ss combine 6 hole , mcb 16a 3 pole 415v ac, c series , 3 pole mcb, c curve 63amp 415v 50hz , pvc insulated copper wire 2 point 5 sq mm 1core , pvc insulated copper wire 4 sqmm 1 core , pvc insulated copper wire 1 point 5 mmsq 1 core , pvc insulated, unarmoured copper cable 2 core 2 point 5 sq mm , 4core x 4 sq mm copper pvc sheathed unarmoured multi stranded copper cable , 0 point 75 sq mm copper wire 2 core twisted wire , 3 pin plug top 6 amp , crc lectra clean 20 litre , twist drill bit hss 2 8 set , 6 way modular box , modular switch 6amp , modular switch 16amp , flood light led 120 w , hand gloves rubber pair , jointing copper kit set straight 185 sqmm , indicator universal type r y b g , paint brush 2 inch , pvc type roll r y b , wire stripper self adjusting , line tester , plier 8 inch , long nose plier 170mm , screw driver set , timer multifunction on off delay , loctite , mcb single pole 6 amp , mcb double pole 6 amp , mcb double pole 10 amp , mcb double pole 32 amp , mcb double pole 16 amp , mcb 3 pole 32 amp , electrical hand gloves 66 kv , led tube light with driver 8w 2 feet , led tube light 4 feet 18 w , soldering iron small tip 25w , markin cloth , battery terminal positive and negative , stp lan cable cat6 305 mtr box , hammer drill bits 6 8 10 12 mm , led hand lamp , bit box for torque screw driver tsk505 , digital line tester , gumboot , 16 amp 3 phase 4 pole industrial switch socket with mcb and enclosure , copper thimble 1 point 5 sqmm-ring type , copper thimble 2 point 5 sq mm ring type , copper thimble ring type 4 sqmm , copper thimble 6 sqmm ring type , copper thimble 10 sqmm ring type , copper thimble ring type 16 sq mm , thimble copper 25 mm ring type , copper thimble ring type 35 sq mm , heavy duty cable cutter 300 sqmm , earthing rod suitable for 132 kv sytem , earth pit indication name plate of size 5x7 with single rod stand complete including painting , alumiminum ladder 8 feet , alluminium alloy ladder extended 20 feet , godrej door lock navtal , digital voltmeter 0 to 500v , digital ammeter range 0 v to 75mv dc , earthing strip, length 50mm width 6mm material gi

Central Government/Public Sector

CTN :44307010

12 Mar, 2026 NA

Multi City - Haryana

Tender For auction sale of depot miscellaneous scrap - scrap & cond. electric items i.e. battery chargers,b-type chock, track feed charger,ekt, stablizers,earthing socket,ebc, relay , inverter,self starter,pannels transformer,rbc,ara terminal,epd etc of sort & sizes, with or without nfs attachment, as it is,us & ur. qty : 22600.00 kg loc:-material lying at bin no.b-4 in scrap yard judw remarks:- 1.loading by purchaser. 2.private road crane allowed for loading purpose only.

Tpmo Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector