Get complete information related to latest Tr Module Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Tr Module Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Tr Module Tenders.
Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t
Tender For supply, erection, testing, and commissioning of electrical equipment and fire extinguishers for the kurha pdn scheme.-oil conservator with filling hole with cap and plain oil level gauge. silica gel dehydrating breather charged with silica gel. ,,oil drain valve. ,oil filter valve. ,lifting eyes/hooks. ,two earthing terminals ,diagram and rating plate. ,air vent ,explosion vent. ,100 mm dia thermometer with thermometer pocket. ,four bi directional plain roller. bucholtz relay. , resistance temp. detector. ,marshalling box. , automatic voltage regulator (avr), 16)
Tender For hn acting for and on behalf of the president of india invites e-tenders against tender no sg-664-08-sig-2026-27 closing date/time 02/07/2026 12:30 hrs. bidders will be able to submit their original/revised bids uptoclosing date and time only. manual o ers are not allowed against this tender, and any such manual o er received shallbe ignored.1. nit headername of workin connection with signaling work related to (1) interlocking of 4 nos. of l.c. gateshaving tvu more than 20000 in dhanbad division. (2) interlocking of one (01 no.)l c gate whose tvu is more than 10000 in block section of jamuniatand halt-chandrapura of dhanbad division.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime02/07/2026 12:30date time of uploadingtender10/06/2026 16:44pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 35736986.06tendering section tender sigbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 714700.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 18/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor items32801118.61above/below/par1a37.00numbers7131.27 263856.99 at par 263856.99description:- "casting, concreting and curing of foundation and erection for full apparatus case(gkp- type) as per drg no. sgw/mgs/l1/91 including cost of all materials required for xing holdingdown bolts, casting, concreting and xing of ""e"" type lock. note :i) the contractor will provideholding down bolts, ii) bottom of apparatus cases should be lled with sand and the top surfacecovered with masonry work and neat cementing."2a37.00 job4493.26 166250.62 at par 166250.62description:- fixing, wiring of terminal strips, bakelite strip, transformers, relays fuses with baseand supply and xing of shelves for full apparatus case with termination earthing of cable and wiringwith lettering as required including supply of wires and miscellaneous materials, sand lling andplastering over sand lling per location.(all materials except transformers, relay, terminal strips,bakelite strip and fuses with base to be supplied by the contractor.)3a12.00numbers6419.42 77033.04 at par 77033.04description:- "casting, concreting and curing of foundation and erection for half apparatus case(gkp- type) as per drg no. sgw/mgs/l1/91 including cost of all materials required for xing holdingdown bolts, casting, concreting and xing of ""e"" type lock. note: i) the contractor will provideholding down bolts, ii) bottom of apparatus cases should be lled with sand and the top surfacecovered with masonry work and neat cementing."4a12.00 job2497.77 29973.24 at par 29973.24description:- fixing, wiring of terminal strips, bakelite strip, transformers, relays fuses with baseand supply and xing of shelves for half apparatus case with termination earthing of cable andwiring with lettering as required including supply of wires and miscellaneous materials, sand llingand plastering over sand lling per location.(all materials except transformers, relay, terminal strips,bakelite strip and fuses with base to be supplied by the contractor.)page 1 of 14run date/time: 10/06/2026 16:44:38dhanbad division-s and t/east central rlytender documenttender no: sg-664-08-sig-2026-27closing date/time: 02/07/2026 12:305a620.00numbers 162.75 100905.00 at par 100905.00description:- supply of pbt fuse block with inserts cartridge type, to be mounted inside thelocation box/ relay rack. fuses (2a, irs : s-78/92). inspection rdso6a620.00numbers 262.11 162508.20 at par 162508.20description:- supply of pbt fuse block with inserts cartridge type, to be mounted inside thelocat
Tender For ur acting for and on behalf of the president of india invites e-tenders against tender no sandt-see-e-ot-26-27-13 closing date/time 06/07/2026 12:00 hrs. bidders will be able to submit their original/revised bids uptoclosing date and time only. manual o ers are not allowed against this tender, and any such manual o er received shallbe ignored.1. nit headername of workprovision of warning alarm of failure of track feed charger at 42 stations alongwithswitching between critical track circuits over sonpur division.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime06/07/2026 12:00date time of uploadingtender10/06/2026 18:19pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 23747496.01tendering section s and tbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 475000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 9 monthscontract type works - general contract category expenditurebidding start date 22/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () 1-annexure - z (part-1) non schedule items23747496.01110001 745.00numbers6522.774859463.28 at par4859463.28above/below/pardescription:- supply of track feed battery charger of input 110v ac, 50hz, to charge 80ah leadacid cell, 10a charging with boost and oat & potential free contact mode as per irs spec. no.irs:s-89/93 or latest. inspection: rdso210002 1000.00 metre 900.77 900770.00 at par 900770.00above/below/pardescription:- exacavation of trenchless track under railway track/busy road etc. at depthculvert/river, (in hdd portion) laying of 100 mm die gi pipe of medium grade in it (gi pipe shall besupplied by the contractor). note:- pipe inspection by consignee.310003 55.00kilometre53913.602965248.00 at par2965248.00above/below/pardescription:- excavation of trench in all kinds of soil and re lling of trenches (1 mtr. depth 300 mmwith) without bricks as per technical specification.410004 1850.00 metre 173.63 321215.50 at par 321215.50above/below/pardescription:- excavation, trenching, earth work and reinstatement of track while track crossing.510005 465.00 metre 399.62 185823.30 at par 185823.30above/below/pardescription:- reinstatement of platform and repairing to original state after cable laying work.610006 560.00 metre 392.13 219594.48 at par 219594.48above/below/parpage 1 of 8run date/time: 10/06/2026 18:19:46sonpur division-s and t/east central rlytender documenttender no: sandt-see-e-ot-26-27-13closing date/time: 06/07/2026 12:00description:- repair of pucca roads to original state in level x-ing area after cable laying works.710007 140.00kilometre11756.921645968.80 at par1645968.80above/below/pardescription:- laying of cable of di erent sizes as per cable route plan approved by railway andmeggering of all main & tail cables as per technical speci cation of tender.(i) 2 core to 12 coresignalling cable.8please see item breakup for details.65113.75 at par 65113.75above/below/pardescription:- supply of non deteriorating type low voltage cartridge fuse as per spec. no.irs/s/78/92. round head type.9please see item breakup for details.87658.60 at par 87658.60above/below/pardescription:- supply of wago terminal block of following specification:-10please see item breakup for details.231449.50 at par 231449.50above/below/pardescription:- supply of pbt ara terminal as per irs specn no. irs:s-75-91 (latest)11please see item breakup for details.157198.20 at par 157198.20above/below/pardescription:- supply of pbt fuse block with inserts cartridge type, to be mounted inside thelocation box/relay rack.1210012 2785.00 core 18.98 52859.30 at par 52859.30above/below/pardescription:- termination of cable cores on ara
Tender For supply of set of spares for maintenance of electrically operated synchronized screw jack, cap. - 25 ton as per attached annexure-"a" for navyug industries (new delhi) make electrically operated synchronized screw jack, cap. - 25 ton- ball bearing for guide roller on girder , oil seal set for gear box (total 03 nos. in a set) , main thrust bearing on top of screw, , 25 a power contactor., , limit switch lim-1 to lim 8 up/down , emergency switch, , omron relay for control 8 pin, , selector switch 6 amp. single pole 3-position , single phase preventer
Tender For cting for and on behalf of the president of india invites e-tenders against tender no j-sg-ot-12-2026-662346 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bids upto closingdate and time only. manual o ers are not allowed against this tender, and any such manual o er received shall beignored.1. nit headername of workaugmentation of block working arrangements by provision of solid state blockinstruments in lieu of existing fm block instruments in poy-cnv and vnb-nilsingle line block sections of palakkad division, along with associated eialterations and other signalling works at poy and cnv stations.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender11/06/2026 18:42pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14469883.92tendering section signalpgtbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 289400.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor items1276856.85above/below/par1021330 140.00 per unit 285.86 40020.40 44.04 57645.38description:- wiring of relay inputs to wago block and wago block to datalogger. necessarywagos required is included as per schedule2021340 20.00numbers 285.86 5717.20 44.04 8235.05description:- wiring of analog voltages from ips room to datalogger. necessary wagos required isincluded as per schedule3031040 4.00numbers28118.51 112474.04 44.04 162007.61description:- supply and provision of earthing as per rdso speci cation rdso/spn/197/2008 orlatest (as per technical specification enclosed)4051160 1000.00 metre 301.05 301050.00 44.04 433632.42description:- supply of underground jelly lled 6 quad, 0.9mm dia as per spec irs:tc 30-05 withamd 5 or latest5051300 4.00numbers3962.00 15848.00 44.04 22827.46description:- supply and xing of 20 pair krone module housed in ms box and termination optical fiber cableables6051320 4.00numbers4761.16 19044.64 44.04 27431.90description:- supply and fixing of 20 pair ct box and termination of cables7051410 20.00numbers 262.65 5253.00 44.04 7566.42description:- supply of rcc cable markers (supply of rcc cable markers as per drawingno.cste/cn/ofc/1. the lettering on the cable marker shall be "sig" / "tele" / "ofc" as per theinstructions of railway representative at site.) as per drawing enclosed8051440 500.00 metre 64.10 32050.00 44.04 46164.82page 1 of 9run date/time: 11/06/2026 18:43:47palakkad division-s and t/southern rlytender documenttender no: j-sg-ot-12-2026-662346closing date/time: 03/07/2026 15:008description:- excavation of cable trench in all kinds of soil except hard rocky areas includingclearing of roots of trees, rocks, bushes etc. to a depth of 1.0 mtrs and to a width of 0.3 mtrs. (layingof cables is not included in this schedule)9051490 150.00 metre 314.41 47161.50 44.04 67931.42description:- removing/breaking of existing rcc slabs on the passenger platform, trenching to adepth of 0.6m to accommodate the additional cables, replacing the slabs removed after the cablesare laid and replastering with cement mortar, re lling the trench by ramming and consolidating it asper the instructions of railway representatives at site. (laying of cables is not included in thisschedule).10051520 36.00 metre 385.45 13876.20 44.04 19987.28description:- excavation of trench to a depth of 1 mtr. for track crossing of cables, re lling oftrench by ramming and consolidating it as per the instructions of railway representative at site afterlaying of dwc/rcc pipes. during
Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.
Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.