Track Ballast Tenders

Central Government And Public Sector

Tender For supply of material under minor civil and electric work (conservation of (conservation of ancient monument) to repair of ruined part and adjoining area of seventh gate inside kalinjar fort, banda. - supply of materials, brick ballast 25 mm gauge (1st class bricks), unslaked lime (katni), surkhi powder 1st class, coarse sand meadium gauge (betwa), gur/sheera in semi liquid form, dry gum in crystel form not less than 3 mm, dry bel fruit giri, flagstone 60x60 cm and above of thickenss 50 mm with permissible variation in 5% in thickness, flagstone 60x60 cm and above of thickenss 75 mm with permissible ivariation in 5% in thickness, r.r. stone boulder (10-30 kg), san (raw jute), sand sotne beam (3.00x0.30x0.30m)

Central Government/Public Sector

Tender For construction of platforms, good shed, earthwork/ blanketing in formation/cutting, retaining wall & drain, cop &, fob extension, bridge (br. no.371/3,371-4,372-1,373-1,373-2,374-1,374-2,374-3,375-1), object controller building, etc. work and dismantling and track works for pachora jamner yard remodelling, including ballast supply in connection with jalgaon-manmad 4th line project of central railway.(two packet system)

Central Government/Public Sector

Tender For proposed collection and training out of 50 mm machine crushed hard stone ballast at madukkarai depot.

Central Government/Public Sector

Tender For proposed collection and training out of 50mm machine crushed hard stone ballast at bundar depot.

Central Government/Public Sector

Tender For supply of 136732.40 cum stone ballast (machine crushed) 65 mm gauge as per revised specification of rdso track ballast of is/rdso-ge/0001:2023, february2023 and loading the same into railway wagons/hoppers at ballast depot sarupsar, under aden/suratgarh.

Central Government/Public Sector

Tender For scope of work (sow) as mentioned in tender and schedule of work( 38 )items as given below ,[1] cleang of sewer lines of any diameter 250.000 m,[2] cleang mhole,any size/depth,split bamboo 50.000 ea,[3] placg circular pre-cast cc manhole cover 50.000 ea,[4] remvg blockage of any dia after earthwrk 300.000 ea,[5] carry,load/unload,pre-cast mh cover slab 100.000 ea,[6] cutting wall of manhole to connect sewer 250.000 ea,[7] brick masonry work with m-50 bricks 50.000 m3,[8] labour required f/brickwrk in cm1:6 25.000 m3,[9] fixg 225mm rcc hume pipe,depth<1.5m,ballast,40mm,6:3:1 3.000 m3,[25] nmnl mix,m-15 cc w/grd stone chips 3.000 m3,[26] plaster sand/cement mortar,6:1,thk15mm 50.000 m2,[27] neat cement punning thk1.5mm in wall 50.000 m2,[28] reinf f/reinf conc wrk,grd flr/<4m 1.000 to,[29] hire, lbr for 25-30mm thk wooden shutter 100.000 m2,[30] remvng,chockage of wc 100.000 ea,[31] clng&rmvg conservancy garbage w/rubbish 100.000 m3,[32] cleang sludge,mud etc frm roadside drain 100.000 m3,[33] dismantle rc slab, floor, remove rubbish 10.000 m3,[34] recover brick from dismantle, min 150nos 1.000 m3,[35] bailing/pumping out water from manhole 500.000 m3,[36] remvng,silt,sludge etc 400.000 m3,[37] clng,epwc with acid 50.000 ea,[38] clng,ipwc basin w/acid 50.000 ea

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , towel rail (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , towel ring (q3) , plain glass sheet 4mm thick , cp jet spray butterfly , plywood one side teak face 8x4x4mm , cabinet mirror 555x350x120mm , brass spindle 20 mm , plywood commerical 8x4x9mm , cp soap dish , pvc bib cock long body , gi pipe medium grade 15 mm with socket , gi pipe medium grade 20 mm with socket , gi pipe medium grade 25 mm with socket , gi pipe medium grade 40 mm with socket , gi pipe medium grade 50 mm with socket , stainless steel sink with board 1 mm thick , stainless steel kitchen sink without drain board , corner glass shelf , pvc waste pipe 32 mm dia , stainless steel grating 150mm dia with cockroach trap , urinal waste pipe pvc , m s delinator , aluminium sole studs and flasha , rubberized speed breaker 250x350x50mm , speed breaker 500x400x50mm , knob for table drawer fancy type , cp handle for almiraha large , lock for almiraha large , hasp and staple 3 inch long , cp handle 4 inch long with screw , prelaminated particle board 8x4x18mm both side teak face , water ballast road barrier 1250x450x800mm 50 ltr , ass pe speed breaker 250x350x50mm , ass pe speed breaker 500x400x50mm , ass pe speed breaker 250x750x75 mm , stainless steel peg set set of six * /bid number : gem/2026/b/7625540 + /dated: 20-06-2026 ' ' / bid document 1 / 40

Tender For bid to ras supply of m sand 1200 cubic ft , pit sand 1200 cubic ft , ballast gitti 800 cubic ft , ash bricks 9inch x 4.5 inch x 3 inch , cement bags , tmt bars in kgs , labour charge

Tender For bid to ras supply of m sand 1200 cubic ft , pit sand 1200 cubic ft , ballast gitti 800 cubic ft , ash bricks 9 inch x 4.5 inch x 3 inch , cement bags , tmt bars in kgs , labour charge

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint