Get complete information related to latest Track Light Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Track Light Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Track Light Tenders.
Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm
Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt
Tender For street lighting and electric maintenance and improvement material supply work. for nagar palika parishad damoh - inviting rate for electric material as given in the list for the finacial year 2026-27, incandesent lamp, 4 pin cfl lamp 36 watt (pl-rod), t-5 rod 24 watt, electonic chock for street light 36 watt, electonic chock for street light 48 watt (2 24watt), cfl street light fixiture 36 watt, t-street light fixture 4 24, t-street light fixture 2 24, aluminium wire 4 mm, aluminium wire 6 mm, coper wire 1 mm, coper wire 2.5mm, led tube rod 22 watt with driver, led driver(street light) 50 watt, led fiood light driver 100 watt, led filood light for high mast 200 watt, bullb holder for pandent/angel, 2 pin holder for t-5 fixture, 4 pin holder for cfl fixture, steel gripe eletric tape, main switch 100 amp, main switch 200 amp, mccb 100 amp, mccb 32 amp, mccb 63 amp, swich board 10 module with switch with switches sockets, swich board 12 module with switch with switches sockets, switch board with 3 pin socket and switch, switch board with 5 pin socket and switch, call bell musical, mpp condenser for fan and cooler 440 v3.15 mfd, ceiling fan 60 watt 1400 mmsweep, wall mounting fan complete 300 mm sweep, exhaust fan 450 mm sweep 900 rpm, gl bracket for steet light 2 meter with nut bolt and complete fitting, pvc casing cappping pipe rectangular, casing pipe round, fountain light 30 watt, fountain light 50 watt, tracklight (focus) 30 watt, tracklight (focus) 50watt, decorative dom 300 mm to 600 mm, aluminium wire 1.5 mm, aluminium wire 2.5 mm, armored 2 core cabl 10 sqmm, armored 2 core cabl 16 sqmm, unarmored 2 core cable 10 sq mm, unarmored 2 core cable 16 sq mm, unarmored 3 core cable 16 sq mm, unarmored 3core cable 25 sq mm, unarmored 3 core cable 35 sq mm, unarmored 3 core cable 50 sq mm, armoured 3 core cable 16 sq mm, armoured 3 core cable 25 sq mm, armoured 3 core cable 35 sq mm, armoured 3 core cable 50 sq mm, armoured 4 core cable (xlpe) 16 sq mm, armoured 4 core cable ( xlpe) 35 sq mm, main switch 63 amp., main switch 400 amp., switch fuse unit triple pole with neutral 63 amp, switch fuse unit triple pole with neutral 100 amp, switch fuse unit triple pole with neutral 200 amp, mminiature circuit breaker.(mcb) single pole neutral 6 to 32 amp., mcb triple pole &neutral 6 to 32 amp., aluminium lugs 25 to 50 sq mm, copper lugs 25 to 50 sq mm., led limp/bulb 3 w, led limp/bulb 12 w, led limp/bulb 18 w, fan regulator 1000 w, cooler pump, cooler fan 450 mm, modular switch 6 a, modular switch 16 a, modular switch 32 a, regular switch 6 a, regular switch 16 a, regular switch 32 a, modular 3 pin socket 6 a, modular 3 pin socket 16 a, modular 3 pin socket 32 a, regular 3 pin socket 6 a, regular 3 pin socket1 6 a, regular 3 pin socket 32 a, led strip water proof 60 led per meter driver outdoor 24, power supply for led strip 24 w, power supply for led strip 75 w, submersible flat cable 3 core cu. wire 6 sq mm, submersible flat cable 3 core cu. wire 10 sq mm, cooler honey comb pad, inverter 1000 va., inverter 1000 va. ups., 4 pin pl (c.f.l.)tube 36 watt, switch contactor mnx 32, 3 pole 240 volt. 50hz 32 amp l&t made, switch contactor mnx 100, 3 pole 415 volt. 50hz l&t made, switch contactor mnx 25, 3 pole 240 volt. 50hz l&t made, switch contactor mnx 100, 3 pole 240 volt. 50hz l&t made, timer renowned make, mcb isolator suitable for 415 volt 50 hz pole 40 amp., mcb isolator suitable for 415 volt 50 hz pole 100 amp., mcbof "c" sries 415 volt 50 hz 10 ka, single pole 63 amp, steel 2 way swtich, destreil water for battery, extention bord 5 point with switch indicator 3 meter long copper cable
Tender For corrigendum : special repair for replacement of old hpsv hpmv cfl street light with new led street light fittings and allied work in certain unit at mil stn jaisalmer
Tender For auction sale of depot non ferrous scrap - pl no.98230013, sc. aluminium in pieces consisting of aluminium chequered plate, aluminium channel, aluminium pipes, grill, filters, aluminium rack, frame, flat, led street light fittings, hpsv, mv, mh fittings and miscellaneous aluminium items of sorts and sizes with some ms attachments. condition-loading by department. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.