Latest track machine Tenders | Government track machine Tenders

Central Government/Public Sector

CTN :44696082

09 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rail 60 kg 1 mtr long above remarks :-kachcha approach road is available near by the lot. no wear and tear has been provided for any scrap rails delivery will be made on sectional weight per meter basis only. quantity is physically available. delivery will be made during dry season lot no. has been painted on the lot. actual measurement painted on each rail in meter. cutting of rail above 6 meters is allowed for easy transportation. the quantity as per ss-11 has been 96.944 mts.rail in nos.184,r/mtrs 1864.31 and physically available at the site. the stockholder will be fully responsible for any alteration, addition or deletion in the lot after joint inspection. dunnage 03 nos. rails are included in the lot length 20.12 r/mtrs and it should be delivered.at the time of delivery. fish plates/joggle fish plates/glued joints and other fittings are to be returned to the stockholder. in stack no.01 there are some mix rail 14 nos ,04 nos tounge rail &06 stack rail, laying near the lot. rail 52 kg,04 nos wing rail, & other rail not included in lot. the same should not be delivered. at the time of delivery. in stack no.02 laying near by lot 11.69 mtr rail , 03 nos other rail 60 kg , st sleeper 10, 01 ohe pole are not included in lot..the same should not be delivered. similar and other type of material such as scrap rails are lying nearby lot will not be delivered, only lot qty will be delivered. it is strictly advice to bidder to see the lot personally before the bidding for the lot. lot is ok for sale on above observations. stock holder- sse p .way kjt-ii.

Central Government/Public Sector

CTN :44791647

15 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of overhauling , instalation & commissioning of cummins engine serial no. 25350814 (nta 855) released from duo-8094 machine including fitment of spares as per annexure a . scope of work-scope of work: 1. collection of engine from the zonal track machine depot rkmp wcr. 2. complete overhauling, and spares will be changed as per annexure a 3. after overhauling and painting, the engine must be properly packed and delivered to ztmd rkmp. 4. after the delivery of the overhauled engine, installation, commissioning, and a minimum of two trial blocks should be carried out in the presence of thefirm's service engineer. 5- at the time of engine delivery, the all released material of engine should be deposited with ztmd. make-cummins or equivalent ]

Central Government/Public Sector

CTN :44790234

04 May, 2026 NA

Thiruvananthapuram - Kerala

Tender For thrippunithura (trtr) : development of track machine siding.

Central Government/Public Sector

CTN :44785007

21 Apr, 2026 NA

Salem - Tamil Nadu

Tender For corrigendum : auction sale of pway scrap - condemned and unserviceable cl.iii weighment rails consisting of 1] 52kg glued joint of sizes g3l - 7 nos , 52kg glued joint of sizes g3s - 5 nos, 52kg conv sej stock rail - 4 nos, 52kg conv sej tongue rail - 1 nos, 52kg imp sej stock rail - 4 nos, 52kg imp sej tongue rail - 4 nos, 52kg sej gap avoid rail - 4 nos, 52kg check rail - 6 nos , 52kg tongue rail(1 in 12) - 7 nos, released 52 kg rail (below 1 meter) - 2.74m. s.1539 no. 693703/2025-26 dated 23.04.2025, qty. - 12.824 mt, 2] 52 kg glued joint of sizes g3l - 17 nos, 52 kg glued joint of sizes g3s - 2 nos, conv sej stock rail 52 kg - 9 nos, conv sej tongue rail 52 kg - 6 nos, 52 kg imp sej stock rail -6 nos, sej check rail 52 kg - 2 nos,. sej gap avoid rail - 6 nos, 52 kg imp sej tongue rail -4 nos, 52 kg i in12 tongue rail -5 nos, stock rail 52kg -5 nos, check rail 52kg -2 nos, rails 52kg (below 1 m) - 11.87mtr., s.1539 no. 693711/2025-2026 dated 15.08.2025, qty. - 21.252 mt total qty. - 34.076 mt

Central Government/Public Sector

CTN :44790110

30 Apr, 2026 NA

Bikaner - Rajasthan

Tender For extension of existing tmc shed in connection with infrastructure enhancement of satellite track machine depot, lalgarh/bikaner with the provision of staff facilities under aden/hq/bikaner.

Central Government / Public Sector

CTN :44788070

27 Apr, 2026 4.09 Crore

Vaishali - Bihar

Tender For construction of washing pit, shed for washing pit, new steel gates in existing track machine shed and the track linking and other miscellaneous work of track machine depot at chak sikandar

Central Government / Public Sector

CTN :44789980

28 Apr, 2026 NA

Sambalpur - Odisha

Tender For repairing of track machines by welding and gas cutting of various parts in connection with ioh and other maintenance at satellite depot/blgr and reconditioning of spare parts of different components of bcm at bcm machine base station & at site of any other track machines working in sambalpur division under aen/tm/sbp for the period of 24 months.

CTN :44430316

11 Apr, 2026 46.73 Lacs

Asansol - West Bengal

Tender For corrigendum : providing of custom bid for services - open tender for outsourcing of male cook cum helper for track machine organisation of asansol division

Central Government/Public Sector

CTN :44483378

15 Apr, 2026 1.25 Crore

Delhi - Delhi

Tender For corrigendum : supply of ortho d d - schanz screw , denhams pin , steinman pin , universal external fixator clamp , tube to tube clamps , tubular rods , forearm fixator clamps for pins , forearm fixator connecting rods all sizes , forearm fixator radio lucent carbon connecting roads all sizes , jess distractor , spanners , box spanner , illizarovwire , olive wire , threaded rods , partial threaded rods slotted , half rings , 5 8 rings , rings with curved extremities , illizarov italian femoral , multiple pin fixation clamp , pin fixation bolts , 13mm nuts stainless steel , oblique support with thread stainless steel , telescopic rods , graduated telescopic rods , hinge female standard, low profile , 90 degree hinge standard low profile , post female , post male , knurling post male stainless steel , cannulated knurling bolt stainless steel , universal joint stainless steel , rotational and translational device , short connection plates , curved plates , short connection plates , connection plates withthreaded ends , long connection plates , bushing , twisted plates length , threaded sockets length , wire fixation buckle , wire fixation bolts cannulated , connection bolts diameter , nut thin nut nylon insert nut square nut illizarov , flat sided washers , spacing washers , split locking washers , conical washer couple , star washers , blocks for half pins , sleeves , rail fixation system , pediatric rail system , central clamp rail fixator , end clamp rail fixator , swivel clamp rail fixator , metaphyseal clamp rail fixator , ball socket clamp standard rail fixator , tball socket clamp rail fixator , compression distraction rail fixator , graduated swivel clamp , central clamp , dyna ring clamp , t clamp rail fixator , tend clamp , sandwich plate rail fixator , bolt for sandwich plate , end clamp , half pin size , dynamic external fixator , self adjusting clamp with ) /bid number : gem/2026/b/7355902 * /dated: 16-03-2026 & & / rate contract bid document this rate contract bid is governed by general terms and conditions of rate contract 1 / 119 & & ' ' /item category medium dynamic , elbow clamp rail fixator , cortical screws for fixation of small bones , cortical screws for fixation of small bones low profile head , cortical screws for fixation of small bones, low profile head , cortical screws hexagonal , cortical screw , cannulated cancellous screw , partially threaded cancellous screw with washer , cannulated screws , solid cancellous screws , washer stainless steel and titanium , washer for screws , herbert screw , mini fragment plates , sfs dcp , reconstruction plates , low contact dcp , tubular plates , narrow low contact locking compression plate , broad low contact locking compression plate , distal radius dorsal anatomical locking plates , radial styloid anatomical locking plates , distal radius volar lcp , anatomical distal radius , anatomical locking plate for wrist arthrodesis , distal ulna hook plate lcp , radial head anatomical locking plates with screws , proximal radius anatomical locking plates for fixation of radial head and neck fractures , proximal ulna anatomical locking plate suitable for fixation of proximal ulna fractures , distal humerus anatomical locking plate set , distal humerus anatomical metaphyseal locking plate suitable for fixation of metaphyseal fractures of the distal humerus , distal humerus extraarticular lcp 6 locking screws and 6 cortical screws 6 to 14 holes , distal humerus extraarticular lcp , distal humerus lcp , distal medial humerus lcph , distal medial humerus lcp , philos short , philos long , humerus il nail cannulated , clavicle locking hook plate , superior anterior clavicle lcp , anatomical locking lateral end clavicle plate , scapula acromion plate , scapula glenoid plate , scapula lateral border plate , scapula lateral border plate , scapula medial border plate, , scapula medial border plate , symphysis pubis plate , pelvic recon plate , pelvic curved recon pl

Central Government/Public Sector

CTN :44769534

13 Apr, 2026 NA

Rameswaram - Tamil Nadu

Tender For auction sale of pway scrap - condemned, released & un-serviceable cl.iii rail 52kg-2032.27mtrs-105.454mts.[total-105.454mts].location-available at km.661/800-662/000 rh & lh side between pamban(b) and rameswaram stations. not for sale:- i)stock no.2- 6 set jfp + 6 set bolt & nut. ii)stock no.1-glued joint-2nos,1set jfp + 1 set bolt & nut.note:- 1].the above rails to be delivered on linear measurement basis, [2] in all cases, i.e. crane loading/ manual loading, when the length of rails exceeds 5mtrs length, the purchaser (by engaging his own labourers) are permitted to cut the rails to convenient lengths of not less than 2.5mtrs and hand over the non-ferrous and excess quantity to the custodian, [3]any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian. s1539 no.894545 dt.12.09.25 ,udm lot no.089450-25-00001 dt.12.09.25. hsn code.720429.

Track Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors