Latest track roller scrap Tenders | Government track roller scrap Tenders

State Government

CTN :45737655

08 Jul, 2026 8.02 Lacs

Raichur - Karnataka

Tender For dismantling and assembling of split spur wheel, spur wheel gear shaft, intermediate drive shaft, final drive shaft, corroded drive shaft bearing block pedestals and assembly of wagon tippler-3 at chp-i.

Central Government And Public Sector

CTN :45703828

17 Jul, 2026 NA

Surat - Gujarat

Tender For supply of spares of water ring type vacuum pump b b - water ring vacuum pump with installed coupling set coupling guard exhaust valve non return valve ss automatic drain valve and air cock with as per drawing no. - 305 r2 , mechanical seal assembly part no. 2tf120 423 spare of water ring vacuum pump with model serial no. - 2t-50-d spl 5847 for one to one replacement. moc - as per drawing no. - 305 r2 - as built , complete shaft vane wheel impeller 1st and 2nd stage part no. - 2t f 120 258-r, 2t i 120 2453, 2t ii 120 2454 in assembled balanced condition with as per drawing- 305r2- as built , coupling set with rubber spider part no. - l-100 as spare of water ring type vacuum pump with model serial no. - 2t-50-d spl 5847. moc - as per drawing- 305r2- as built , bearing of water ring type vacuum pump with model serial no. - 2t-50-d spl 5847.moc - as per drawing- 305r2- as built , intermediate disc s and e set part no. - 2t f 120 433 01 set - 02 no. as spare of water ring type vacuum pump with , as per drawing- 305r2- as built , control disc suction side part no. - 2t f 120 432s as spare of water ring type vacuum pump with phosphor. bronze is-28 grade -2 - 1985 as per drawing- 305r2- as built , control disc exhaust side part no. - 2t f 120 432e as spare of water ring type vacuum pump with p. bronze is-28 grade -2 - 1985 as per drawing- 305r2- as built , distance piece part no. - 2t f 120 2533 as spare of water ring type vacuum pump with for one to one replacement. moc - ss-304 as per drawing- 305r2- as built , key part no. - 2t f 120 2563 as spare of water ring type vacuum pump with for one to one replacement. moc - ss- 304 as per drawing- 305r2- as built , key part no. - 2t f 120 2564 as spare of water ring type vacuum pump with model serial no. - 2t-50-d spl 5847 for one to one replacement. moc - ss-304 as per drawing- 305r2- as built , flap ring set part no. - 2t f 120 2553 01 set - 02 no. as spare of water ring type vacuum pump with for one to one replacement. moc - neoprene rubber as per drawing- 305r2- as built , bolts for manifold with plain washers 01 set - 16 no. as spare of water ring type vacuum pump with model serial no. - 2t-50-d spl . moc - sa 193 gr b-7 , as per drawing- 305r2- as built , bolts for bearing case cap with spring washers 01 set - 08 no. as spare of water ring type vacuum pump with .moc - sa 193 gr b-7 , as per drawing- 305r2- as built , bolts for stuffing box with spring washers 01 set - 08 no. as spare of water ring type vacuum pump with for one to one replacement. moc - as per drawing- 305r2- as built , lock nut part no. - 2t f 120 256 2 r1 for water ring type vacuum pump with for one to one replacement. oc- ss 304 as per drawing no. -- oem drawing- 305 r2- as built

Central Government/Public Sector

CTN :45724153

13 Jul, 2026 NA

Chandigarh - Chandigarh

Tender For supply of wheel profile gauge for intermediate worn wheel profile for coaching stock as per rdso sketch no. 92082 made of hardened stainless steel. one set consisting (1) 22 mm thick flange - 01 no./set (2) 23 mm thick flange - 01 no./set (3) 24 mm thick flange - 01 no./set (4) 25 mm thick flange01 no./set (5) 26 mm thick flange (6) 27 mm thick flange - 01 no./set. (7) 28 mm thick flange - 01 no./set (8) 29.4 mm thick flange - 01 no./set. make/brand : pie or similar. (calibration certificate from nabl approved lab & material test certificate to be provided along with the gauges) (warranty period : upto 30 months from the date of delivery.) [ warranty period: 30 months after the date of delivery ] ]

CTN :45703859

17 Jul, 2026 2.71 Crore

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of o ring , m15b1 ch pl ti-0.5-lt-nbrp co , m15b2 ep i ti-0.6-ht-nbrp co , m15b2 ep ii ti-0.6-ht-nbrp co , ball bearing , friction element , ball bearing , seal ring , valve plug , rectangular ring , flat belt , seal ring , lock washer , friction block , motor belt pulley , frame foot , gasket , splash sealing , splash sealing , seal ring , service kit for pump , ball bearing , key woodruff , flat key , flexible connection , limit switch , spring washer , o-ring , washer , sealing ring in worm wheel shaft , friction pad , gasket , ball bearing , ring rubber large , ball bearing , screw , screw , screw , worm wheel shaft with conveyor pulley , worm wheel , inlet pipe , service kit for pump , major service kit mopx 207 , intermediate service kit mopx 207 , clamping shoe , 3 years service kit mopx 207 , lifting tool , nut round km-5 , guard , bolt , control paring disc , o ring , washer , themometer , screw screw , nut 3 , o ring , cap nut , deflector , pulley coupling complete with pivot , washer intermediate , bowl spindle , seal ring , valve cone for mab205 , washer for feed pump , shaft of worm wheel , sleeve half , o-ring , o ring , o ring , o ring , o ring , seal ring , seal ring , rubber buffer , deflection ring , wing , oil pump , oil glass , valve plug , ball bearing , ball bearing , rectangular ring , shear-pin coupling , stud bolt , nut , spring , spring id 9.25mm wire dia 1.14mm free length 32 mm , lock screw , worm , nave , protecting plate , gasket , pipe inlet , needle valve , nut for feed tube , valve cone , gasket , pressure gauge and 2 nd stage , 3 years service kit mab 206 , intermediate service kit , major service kit , thermometer

CTN :45602174

02 Jul, 2026 NA

Jalpaiguri - West Bengal

Tender For corrigendum : supply of end tie rod , assy ball joint upper wishbone , ball joint lower , hand brake cable , passenger driver fan 24v , ac gas r134a , assy oil filter , wheel nut , wiper blade rear 330 , intermediate brake hose

CTN :45725352

09 Jul, 2026 22.43 Lacs

Kokrajhar - Assam

Tender For supply of supply of universal extremity plate ss316 , supply of spring type shock absorber ss316 , supply of tensioner with cable extremity housing swag-less , supply of wire rope ss316 8 mm dia 7x7 , supply of intermediate bracket ss316 swivel , supply of cable extremity ss316 8mmdia , supply of wheel type carriage body ss316 , supply of retractable66 fall arrestor block , supply of antistatic full body adjustable harness , overhead over the roof lifeline primary installation , additional anchorage installation , installation of fabrication post up to 25kgs

CTN :45696784

06 Jul, 2026 10.00 Lacs

Kuchaman - Rajasthan

Tender For digital library in shree kuchaman pustakalay. kuchaman city - computer system setup (includes cpu, monitor, keyboard, mouse and accessories) cpuintel core i5- 08th gen processor with activated windows having 8 gb ram, 512 gb ssd, 450w power supplymonitor18" led 45 htz display having hdmi and vga portmouse and keyboardwired optical mouse and wired full numerical pyhysical keyboard(made of dell/lenovo/hp/asus), furniture counter (including table and chair) per personcounter: comfortable size for 20 persons having 32" heightchair: adjustable height wheel movable chair, air conditioners, split acs 1.5 tonwith installation and stabilizer(made of voltas/lg/samsung/lloyd), wi-fi router and internet connectionmulti network wi-fi router having high internet speed minimum 300 mbps, providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in-charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to is: 2095-part i,, brick work with modular fly ash lime bricks (falg bricks) conforming to is:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in : cement mortar 1:6 (1 cement : 6 coarse sand), cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand), distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer., providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, p & f 1st quality heavy duty vitrified polished digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm x 1200 mm, providing and fixing fully panelled /partly panelled double leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per annexure a and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide

CTN :45697848

06 Jul, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of connecting rod , intermediate wheel shaft , oil pump assy , injector washer , roto cap , gasket , high pressure line , hand primer

corporations/Associations/Others

CTN :45676412

02 Jul, 2026 7.71 Crore

Kolkata - West Bengal

Tender For centralized rate contract for two years for supply of various types of spare parts of ms elecon engg. company limited for chp of different plants of dvc. - dowel, part no.-30, type: k2 gear unit, make: elecon engg. co. ltd., drain plug, part no.-45, type: k2 gear unit, make: elecon engg. co. ltd., breather plug, part no.-56, type: k2 gear unit, make: elecon engg. co. ltd., input pinion shaft, part no.-102, type: k2 gear unit, make: elecon engg. co. ltd., input extension key, part no.-107, type: k2 gear unit, make: elecon engg. co. ltd., locknut, part no.-110, type: k2 gear unit, make: elecon engg. co. ltd., lock washer, part no.-111, type: k2 gear unit, make: elecon engg. co. ltd., flanged bush, part no.-120, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-132, type: k2 gear unit, make: elecon engg. co. ltd., output shaft, part no.-202, type: k2 gear unit, make: elecon engg. co. ltd., output gear, part no.-203, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-206, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-232, type: k2 gear unit, make: elecon engg. co. ltd., intermediate pinion shaft, part no.-302, type: k2 gear unit, make: elecon engg. co. ltd., intermediate gear, part no.-303, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-306, type: k2 gear unit, make: elecon engg. co. ltd., roller assembly r-800 drg no- r00673/3, for paddle feeder m/c no. 27-30, make-elecon, roller assembly r-600 drg no- r00686/3 , for paddle feeder m/c no.-27-30,make-elecon, geared coupling ed500, propeller shaft series 1600mm part-m08244/1 for paddle feeder m/c no- 27-30, make-elecon, paddle shaft 88diax477 lg part-m13004/4 for paddle feeder m/c. no.-27-30, make-elecon, paddle shaft 88diax812lg part-m13006/4 for faddle feeder m/c no.-20-30, make elecon, coupling for propeller shaft part-m13005/4 for paddle feeder m/c no.- 27-30, make elecon, wheel drive parto-m11031/3 for paddle feeder m/c no. pf-27-30 , make - elecon, keeper plate part-m08596/4 for paddle feeder m/c no.- 27-30, make - elecon, spacer for bearing 89.8/80diax27thk for paddle feeder m/c no- 27-30, make -elecon, cover for bearing 130diax14 thk for paddle feeder m/c no. 27-30, make-elecon, plain wheel dia 160/90x85thk for paddle feeder m/c no.- 27-30, make - elecon, spindle 40 diax210lg part-m08594/4 for paddle feeder m/c no.- 27-30, make - elecon, deep groove ball bearing single row , part no.- m08593/3 for paddle feeder m/c no.- 27-30, make -elecon, filter return line for hydraulic system of paddle feeder pressure relief valve for hydraulic system of paddle feeder, spring, drg. no. m02728/4spare for vibrating feeder,spring, drg. no. m02728/4spare for vibrating feeder, paddle hub with arm, part no. m08456/2 (spares for paddle feeder plough drive assembly of elecon make paddle feeder, m/c no. pf: 27-30), locking plate(spare for paddle drive assy.), locking assy. d0b1kon1012140x190 for paddle drive assy., ci cast housing for extra bearing housing (spare for paddle drive assy. of paddle feeder), spacer 75 od x 55 id x 48 lg (for paddle drive assy.), spacer part no. m13062/4(for travel drive assy.), torque arm for travel drive, spacer part no. m13007/4(for travel drive assy.), boss p no. dc0269414, deep groove type ball bearing (for spacer for d.s. trolley), nylon ring 3thk 125od x80 id for spare of ds trolly assy., pin 80 dia x 235 lg(spare for ds trolly assy.), cover 20/80 dia x 20 thick(spare for ds trolly assy), wheel dia 315 mm(spare for ds trolly assy.), drive gear box (type-c082111)make;pbl without electric motor for ilms, planetary gearbox input sun pinion for elecon make planetary gear box type and size pav 45 ratio-5:1, planetary gearbox set of oil seal for elecon make planetary gear box type and size pav 45 ratio-5:1, annulus (part no.5), of planetary gearbox type:pav-45, ref drg no.7741891/3, planet bolt (part no.8) of planetary gearbox type:pav-45, ref drg no.7741891/3, planet carrier cum output shaft(part n

Central Government/Public Sector

CTN :45655573

08 Jul, 2026 NA

Mumbai - Maharashtra

Tender For rate contract for supply of spares of kpcl make air compressor with oem m/s kirloskar pneumatic company limited, pune for a period of (05) five years. - plate intermediate 185d / en-3a , washer m27; 55x28x4mm / ms /, ring o; 200x8 / silicon rubber /, s/a gland packing for cylinder 50d and 370d co2 gas compressor /, s/a cylinder 200d of diaphragm type unloader / / 3ehb4g, stud m14x2x50/34 / /, gasket for 50nb 900lbs / spriget /, bell in 115d fec f/suction valve wi th diaphragm type unloader, valve gate 1-1/4"bsp; screwedpn16# / g.m body;bs:515 /, valve gate 1/2"bsp; screwed pn16# / g.m body;bs:515 /, gasket spriget(spiral wound) 80nb;3 00# / ss-304 /, gasket for 65nb 900lbs / spriget /, gasket 139x102x3; for 3-1/2" flange 150# and 300# / caf /, gasket 15nb;600# / / spriget, cover suction valve for diaphragm t ype unloader in 200 d cylinder, plate intermediate 59d;lub/85d;lub and n/l / ci /, nipple pipe one side thread 1"x66 f or water connection 95d and 85d cylinde, air receiver 20 galllons; skid moun ted / / 4ha4, minimum pre valve assly, ring housing for gland packing / en -56 / 2ehb2g, nipple pipe both side thread; 1/4"x 330 / ms; c class / hb, piston half 330d fec side with new locking arrangement, piston half 330d ip side with new l ocking arrangement/ lm-13;bs:1490, ring intermediate for 330d piston / lm-13 / 3ehb4g, cover f.e.w/70 cr57 clearance valve pocket / / c.i, gauge level reflex type 1-1/2"flang ed;c/c-350mm / /, cooler oil; cum aftercooler / / se s-325 air cooled, ring housing for gland packing 115x 53x25,n/l / en-56, condition p /, ring for gland packing 115x53x25, n /l / en-56,conditionp /, nipple pipe both side thread 1/4"bs px75 / /, cover seal, 175x53x35 / en-56, cond ition p /, sub assembly bare cylinder 125d wit h 105cr valve pocket lub ha / /, switch pressure,8-32 kg/cm2,1spdt, 1/2"nptm,flp iia,iib,fixed diff, rod piston for diaphragm type unloader (200 d cyl) \ en-56 \, rod piston for diaphragm type unloader (140 d cyl) \ en-56 \, 8 channel temp . scannerm 115v a.c. masibus make, gauge pressure, 0-100 kg/cm2, 4"d, 1/2"npt (m), ss burdon, back flush., solenoid valve service kit 110vac(make rotex)model srg 1.8 nw p.n.sv-2,3 port., gauge pressure, 0-4 kg/cm2, 4"d, 1/2"npt (m), burdon, back flush., gauge pressure, 0-10 kg/cm2, 4"d, 1/2"npt (m), mounting back flush., gauge temp., 0-250 degree, 4" d, 1/2" bottom, il-180mm, 150# flanged., trip card, alarm sequence- aa 152, iic make, gauge pressure, 0-6 kg/cm2, 4"d, 1/2"npt (m), burdon, back flush., 110vac supply on / off switch, kaycee make, push button shrouded knob , blackcolour, tecnic make, indicating lamp pin type holder , 24v d.c, tecnic make, indicating lamps pin type holder , 24v d.c. teknic make, fuse glass, 2a, 115v a.c., gauge pressure 0-160kg/cmsq;4"d;1/2 "npt(m) ss bourden; back flish /, cup for suction filter / rubber syn theti / 300/400cfm, kit service (consisting 3nos items0 for sight glass / /, s/a cooler inter between i and ii-sta ge / / 4ehb4g, liner cylinder 350d / ci / hb, liner cylinder 245/280d / c.i /, liner cylinder 185d / ci / 2ehb2g, liner cylinder 125d for cylinder wi th 100ed valve / / 4hb4tergt, plate intermediate 280d for water c ooled gland packing / ci /, plate intermediate 370d f/ water co oled gland pkg. 134cr valve, plate intermediate 125d for water c ooled gland packing / forged steel, sub assembly unloader diaphragm for clearance pocket on f.e.c 280d hb, valve wheel 1-1/4"bsp; screwed;pn16 # / g.m;bs:5154-91 /, stud m16x1.5x40/30 / /, cover suc vlv f/134crs vlv / ms /, bolt hex head m6x1x25/25 / grade 8. 8,is-1367 /, nut lock m6 for gland packing,make-areco t-1714, ring o gasket no:2.035 for gland pkg assly ii and iii- stage /, ring o gasket no:2.042 for gland pkg assly ii and iii- stage /, s/a cylinder with liner 370/310, s/a cooler oil / / 4ehb4g, plate intermediate 370d for water c ooled gland packing / ci /, sub assembly piston 185d with iii c ompartment distance piece 2ehb4g /, ring o gasket no:2.011 for gland pkg assl

Track Roller Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector