Latest traction bar Tenders | Government traction bar Tenders

Central Government/Public Sector

CTN :45731469

29 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of set of retaining rings (pivot ring & housing ring) for housing of traction bar. set consistingof (1) pivot ring as per clw drg. no.1209.01.313-005, alt-2 (ref. abb drg. no. ia016-00261 rev-3) qty: 04 nos/set. and (2) housing ring as per clw drg.no.1209.01.313-004, alt-2 (ref. abb drg. no. ia016-0262, rev-3). qty: 04 nos/set [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743859

20 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of hand brake connecting link with bush (bg and mg) to drg. no. wa/bg-1190, alt.1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45561321

20 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For corrigendum : supply of hand brake connecting link with bush (bg and mg) to drg. no. wa/bg-1190, alt.1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45704244

03 Jul, 2026 NA

Uttara Kannada - Karnataka

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; procurement of spares for mhes at nsry (kar); service provider - traction battery with link system, head light with bulb, thermal switch, steering assembly, f/r contactor, hand brake assembly with cable, wheel cylinder, master cylinder, main contactor, battery discharge indicator, wheel cylinder, master cylinder, master cylinder seal kit, hand brake assembly with cable, emergency cut off switch, taper roller bearing, taper roller bearing, master cylinder kit, journal assembly, accelerator paddle (curtis), wheel bearing housing, thrust bearing, steering assembly, gear, mounting

CTN :45717809

08 Sep, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of set of retaining rings (pivot ring and housing ring) for housing of traction bar, set consisting of following items:- (1) pivot ring as per clw drg.no.1209.01.313-005 alt-2 with latest alteration (ref.abb drg.no.ia016-00261 rev-3 with latest rev., qty/set-04 nos. and (2) housing ring as per c lw drg.no.1209.01.313-004 alt-2 with latest alteration (ref.abb drg.no.ia016-0262 rev-3 with latest rev.), qty/set-04 nos.. spec./drg.no. clw drg.no.1209.01.313-004 alt-2 with latest alteration and clw drg.no.1209.01.313-005 alt-2 with latest alteration. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Central Government/Public Sector

CTN :45702841

03 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap mixed ferrous heavy melting component consiste of stay plate. axle box end ring. axle box bearing distance, axle box cover (plain) axle box without bearing of wag-5 & spring seat of wag-5, sanding arrangement, hanger lever, cylinder lever, brake equilizer, yoke for cbc, brake shoe holder, unmodified hand brake assembly, safty bracket, slack adjuster, foot step of wag-5 & wag-9, beam link pin (small & big), lipped & plain racer & other small ferrous loco items released from ac loco. weight= 20.363 mts. for custodian information ss-11 no. nkj/trs/scf/26-27/4 dt. 01.06.2026. ds-8 note no. 020719 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)

Central Government/Public Sector

CTN :45678589

15 Jul, 2026 NA

Parganas - West Bengal

Tender For supply of assy ball joint upper , assy ball joint lower , assy front shock observer , front axle cv shaft cv assy lh abs , front axle cv shaft cv assy rh abs , chart pin for roll or cotter , retainer nut , sprint wave washer , nut hex pinion , axle oil seal , washer thrust , front axle cv shaft axle fin , snap ring , bushing synthetic , needle roller bearing assy front , assy hub bearing front set , front brake pad set , steering column cross , assy tie rod set , assy center link rhd set , gear lever bush set , anti-roll bar rubber bush , anti-roll bar rubber bush mtg. , assy link front anti roll bar , rear wheel cylinder , rear brake shoe set , rear brake shoe lock and sprig , hand brake cable both side , u bolt hex nut , pivot bush assy front upper , rear suspension bush kit complete set , assy orvm with turn ind both side , drop arm bush , suspension lower arm bolt , ana bond tube , head light assy with bulb rh , upper arm rubber damper , 4x4 front axle actuator 4 pin , anchor bolt for torsion bar

Central Government/Public Sector

CTN :45681887

06 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of push pull rod [traction bar] for wap7 / wag9 as per clw drg.no. 1209-01.113-006 alt-6or latest. abb drg.no.ib.011.00191 rev.3 or latest consist of 3 items - (1) flange should be as per clw drg.no.1209-01.113-007 alt.7 or latest (abb drg.no.ia001- 00381 or latest), (2) tube welding as per clw drg.no.1209-01.313-008 alt.5 or latest (abb drg. no.ib016-00350 or latest) & (3) traction bar (push pull rod flange hole size should be as per rdso smi.no.rdso/ 2006/el/0241 (rev.0) or dated 24.10.06 or latest. note: dpt & mpt testing to be done as per rdso letter no. el/3.1.35/12 dated 15.09.2017 [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45675466

03 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of others - unserviceable and condemned 08 no. pantographs (i.e. sil make=05 nos. & cpl make=02 nos. & gsec make=01 no.) for three phase locomotives, 66 nos. items (i.e. push-pull rod=10 nos., housing for traction bar=28 nos., axle box housing for wag-9 loco.=28 nos. with km make for three phase locomotives , 198 nos. roller bearing released from various traction motor of three phase electric locomotives , 30 nos. pinion (20 teeth=01 no. & 21 teeth=29 no.) with different make for three phase traction motor type 6fra6068, 17 nos. auxi. motor (i.e. arno rotor=01no., mcp motor=05nos., mrb motor=01no.,mvrh motor=06nos., mvsi motor=02 nos.,ocb stator=01nos.,tmb motor=01no.) with different make for conventional & three phase locomotives, 17 nos. auxi. motor (i.e. mcp motor= 07 nos., mvrf motor=02 nos., mvsi stator=01no.,ocbmotor=04nos.,ocb motor without bearing=01no.,ocb stator=02nos.) with different make for conventional & three phase locomotives, 03 nos. air compressor without motor with elgi make removed from three phase/conventional locomotives, 14 nos. primary voltage transformer with different make released from three phase/conventional locomotives.

Traction Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors