Get complete information related to latest Traction Bed Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Traction Bed Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Traction Bed Tenders.
Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii
Tender For supply, installation, testing and commissioning of hydraulically operated equipment to take out bearing from the bearing cover along with holding arrangement traction motor bearing puller , use for demu-power car/tower car/emu/memu. specifications: - 1 capacity: 30tons, 2 clear day light: 500mm 3 stroke: 400mm. 4 working area: 900x900mm. 5 table light: 700mm 6 cylinders: dia 150 x 11x400 stroke. 7 hydraulic hand pump- 1no. 8 bearing holding arrangment-2 sets. 9. bearing pusher plates-2nos. hardened steel construction. 10. power source: manual hydraulic operation. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply, installation, testing and commissioning of hydraulically operated equipment to take out bearing from the bearing cover along with holding arrangement traction motor bearing puller , use for demu-power car/tower car/emu/memu. specifications: - 1 capacity: 30tons, 2 clear day light: 500mm 3 stroke: 400mm. 4 working area: 900x900mm. 5 table light: 700mm 6 cylinders: dia 150 x 11x400 stroke. 7 hydraulic hand pump- 1no. 8 bearing holding arrangment-2 sets. 9. bearing pusher plates-2nos. hardened steel construction. 10. power source: manual hydraulic operation. [ warranty period: 30 months after the date of delivery ] ]
Tender For e-tender are invited online for the supply of veterinary instrument, equipments and others item from manufactures,stokist and authorized distributors for the year 2026-27 - a.i guns french mini with container (as per specifications) (sample), a.i kit (as per specifications) (sample), a.i sheaths french mini (as per specifications) (sample), a.i.crate cum travis (as per specifications) (sample), disposable a.i gloves (as per specifications) (sample), straw cutter round plastic body (as per specification) (sample), p.v.c. goblets made of virgin plastic round size 35mm x118mm (sample), p.v.c. goblets made of virgin plastic round size 65mm x118mm (sample), rubber gum boot size 9 no(sample), rubber gum boot size 10 no (sample), allies tissue forceps size 8 (sample), long forceps size 20 (sample), long curved throat forceps (sample), dressing forceps straight 30cms (sample), dressing scissors curved 8 (sample), dressing scissors straight 8 (sample), artery forceps straight 8 (sample), artery forceps curved 8 (sample), clipper scissors size 20 cm curved (sample), mayo scissors straight 7.5 (sample), mayo scissors curved 7.5 (sample), suture cutting forceps size 6 (sample), suturing needle straight traumatic and traumatic size no. 1 (pkt of six) (sample), suturing straight curved traumatic and traumatic size no.5 (pkt of six) (sample), b.p blades sterilized with isi mark (pkt of 100 blades) size 15 (sample), b.p blades sterilized with isi mark(pkt of 100 blades) size 24 (sample), b.p handle size 4 (sample), b.p handle size 3 (sample), disposable needle 20 gauge 1.5 (sample), disposable2 ml syringe with needle (as per specification) (sample), disposable 5ml syringe with needle (as per specification) (sample), disposable10 ml syringe with needle (as per specification) (sample), disposable 20 ml syringe with needle, disposable syringe without needle 2 ml (as per specification) (sample), disposable syringe without needle 20 ml (as per specification) (sample), disposable syringe without needle 50 ml (as per specification) (sample), 5 ml disposable syringes with needle 21 (as per specification) (sample), automatic breaking single use vaccination syringe 2 ml 16g, 3/4 inches needle (sample), automatic breaking single use vaccination syringe 5 ml 18g, 3/4 inches needle (sample), disposable i.v set sterilized, non-pyrogenic, with double filter and needle 16 1/2 gauge (sample), operation table for large animals (hydraulic) (as per specification) (catalogue), operation table hydraulic for small animal with remote (as per specification)(catalogue), working table for hospital and labs (as per specification) (sample), examination table (as per specification) (sample), veterinary surgical equipment kit (for large animals) (as per specification) (sample), veterinary surgical equipment kit (for small animals (as per specification) (sample), polyglact in 910 with ingra care coating 3-0 round body, polyglact in 910 with ingra care coating 1-0 reverse cutting, absorbent pad (size 20x8 cm) sample, absorbent pad (size 12x12 cm) sample, chromic 1 , rb (as per specification) (sample), bb silk 2-0 rb(as per specification) (sample), autoclave 10 lit. with dressing drum bin ss (as per stratification) (sample), hoof cutter double action (sample), instrument cabinet (as per specification) (sample), instrument trolley (as per specification) (sample), hoof trimming set (as per specification) (sample), docking machine for large animals, chrome plated (sample), bowls stainless steel size 20 cms (sample), long range vaccine carrier 20 lit. (as per specification) (sample & catalogue), vaginal speculum for small animals size 6 (sample), vaginal speculum for large animals size 14 (sample), trocar and cannula for large animals with metal handle ss(sample), i.v. catheter (as per specification)(sample)(sample & catalogue), teat surgery set complete (as per specifications)(sample), dystokia set (as per specification)(sample), stethoscope (as per specification)(sample
Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q3) , led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , led batten light (led tube light) (v2) (q2) , pvc insulated copper cable single core and multi core circular sheathed with flexible conductor (v2) isi marked to is 694 (q2) , busbar 8 way 415 w, 400 amp make havells, legrand, l and t , cable pvc insulated copper conductor cable 2.5 sqmm 3 core make kei, havells, plaza, gloster, anchor , fully automatic star delta starter 30 hp best quality , tubing med grade 80mm dia gi 6m long best quality , led street light 250w with aluminium pdc housing, polycarbonate cover with individual led lenses and toughened glass cover make philips,wipro,surya,panasonic,bajaj,orient , concealed led light 3-5 watt make philips,wipro,surya,panasonic,bajaj,orient , programable street light controller switch pscs 18kw make havells, legrand, l and t , led panel 22-24 watt make philips,wipro,surya, ,panasonic,bajaj,orient , programable street light controller switch pscs 30kw make havells, legrand, l and t , led doom light 20 watt make philips,wipro,surya,panasonic,bajaj,orient , led doom light 35 watt make philips,wipro,surya,panasonic,bajaj,orient , stainless steel wire mesh 1mm thick x0.56mm best quality , scantling 1 st class wood 75x75mm best quality , kitchen sink with draining board ss 915mmx 460 mm x 178mm make parryware, prayag, hindware, shakti, jaquar , low level flushing cistern 10 ltr capacity dual flush make prayag, xen, prima, shakti, jaynam , tubing 15 mm dia 6mt long gi best quality , hydraulic door closer 300mm make classic, crown, prayag, harrison , godrej , looking mirror with ac or ply wood 450 x 600 mm make prayag, xen, prima, shakti, swastik, jaynam , top for table dining 3 ft x2 ft make best quality , toilet seat cover white pvc make prayag, xen, prima, shakti, jaynam , bib cock 15mm pvc-brass make prayag, xen, prima, shakti, jaynam , towel rail 24 inch long cp make prayag, xen, prima, shakti, jayna //bid details 2 / 53
Tender For supply, installation, testing and commissioning of hydraulically operated equipment to take out bearing from the bearing cover along with holding arrangement traction motor bearing puller , use for demu-power car/tower car/emu/memu. specifications: - 1 capacity: 30tons, 2 clear day light: 500mm 3 stroke: 400mm. 4 working area: 900x900mm. 5 table light: 700mm 6 cylinders: dia 150 x 11x400 stroke. 7 hydraulic hand pump- 1no. 8 bearing holding arrangment-2 sets. 9. bearing pusher plates-2nos. hardened steel construction. 10. power source: manual hydraulic operation. [ warranty period: 30 months after the date of delivery ]
Tender For supply of installation testing and commissioning of operation theatre on turnkey basis c - hydraulic large animal operation table , led ot lights ceiling mounted , led ot lights mobile , large animal examination cratetravis ss , large animal cratetravis for standing surgery ss , fabrication works as per requirement , fabrication works , small animal anaesthesia machine veterinary specific , large animals iron trolley for transportation , bedside multi para monitor veterinary , small animal surgery table veterinary , small animal examination table ss , surgical suction machine small animal , surgical suction machine large animal , electric cautery vessel sealer veterinary , mouth gags for animals , large animal slings lifting system , general surgery instruments set small animal , general surgery instruments set large animal fetotomy set , dressing drums , dressing trays , ot fumigator , double drum autoclave , stethoscope , constant rate infusion pump veterinary , veterinary ecg machine ) /bid number : gem/2026/b/7335743 * /dated: 06-04-2026 & & / bid document 1 / 24