Latest traction bond Tenders | Government traction bond Tenders

Central Government / Public Sector

CTN :45061691

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604006 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bobrn m1, boxnr . available on rails. 1) ser boxn m1 10079673692, 2) scr boxn m1 10099630576 3) cr boxnr 25019660533 ,4) er bobrn m1 72029661012 , 5) nr boxn m1 10039661080. location road no.4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributer valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock ofangle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bronze buishes ds8no:0999603006. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 42.199.mt (m.s -37.197, ss-5.002) sold by number basis only.05 nos, delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061692

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604007 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079639360 ,2) ser boxn m1 10079666168 3) special repair boxn m1 10069661050, 4) ser boxn m1 10079561883,5) nr bcn m1 30039062397. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers, 20.knuckle pin.21.knuckle thrower.22.bcn swing, 23.bcnflap ds8no:0999603007. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.174 (ms) .mt sold by number basis only.05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061693

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604008 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079663785 ,2) scr boxn m1 10099660948 ,3) er bobrn m1 72029561756 ,4) ser boxn m1 10079661330,5) er boxnr 10029661076 location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke suppor tplate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bronze buishes s8no:0999603008. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 45.732.mt (m.s-41.400, ss-4.332) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

Central Government / Public Sector

CTN :45061694

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no : 3132604009 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , boxnr ,available on rails. 1) special repair boxn m1 10069660152, 2) special repair bcn m1 30069004213 ,3) ser boxnr 25079661945 ,4) cr bcn m1 30019016389 ,5) er bcn m1 30029024992. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support(1stplate),15.safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bcn swing,23.bcnflaps8no:0999603009. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.677.mt (m.s-48.272, ss-4.405) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

CTN :44918130

08 May, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract with m/s sam turbo for supply of spares - 7md100/250:suc casing, 7md100/250:del casing, 7md100/250:diffuser, 7md100/250:shaft, 7md100/250:impeller, 7md100/250:brg hsg, 7md100/250:brg cover2, 7md100/250:brg cover3, 7md100/250:seal washer set, 7md100/250:o ring set, 7md100/250:felt seal set, 7md100/250:l ring, 7md100/250:stuffing box hsg, 7md100/250:gland, 7md100/250:wear ring, 7md100/250:spacer-7, 7md100/250:spacer-3, 7md100/250:spacer-4, 7md100/250:shaft sleeve-43, 7md100/250:shaft sleeve-6, 7md100/250:sleeve(suc), 7md100/250:sleeve(del), 7md100/250:bal disc, 7md100/250:throttle bush, 7md100/250:tie bolt set, 7md100/250:key(cplg), 7md100/250:key(imp), 7md100/250:key(bal disc), 7md100/250:lock nut & washer set, 7md100/250:cplg set, 7md100/250:balancing drum, 7md100/250:key (balancing drum), 7md100/250:7md100/250:bearing sleeve, 7md100/250:7 md 100/250:bearing housing(, ar 150/500 a:ar150/500 a:bearing bed wit, ar 150/500 a:ar150/500 a:bearing housing, ar 150/500 a:ar150/500 a:pump shaft, ar 150/500 a:ar150/500 a:outer bearing c, ar 150/500 a:ar150/500 a:inner bearing c, ar 150/500 a:gland housing, ar 150/500 a:gland, ar 150/500 a:pressure ring, ar 150/500 a:liquid thrower, ar 150/500 a:shaft sleeve, ar 150/500 a:lantern ring, ar 150/500 a:expeller, ar 150/500 a:wear plate(b.side), ar 150/500 a:impeller with nut, ar 150/500 a:wear plate (s.side), ar 150/500 a:gland ring, ar 150/500 a:bracket side cover, ar 150/500 a:pump pulley, ar 150/500 a:motor pulley, ar150/500:bracket side cover, ar150/500:inner bearing cap for pump, wp 50/320:pump shaft with keys, wp 50/320:impeller with hex nut and wash, wp 50/320:wear ring (casing), wp 50/320:lantern rings, wp 50/320:support foot, wp 50/320:bearing bed, wp 50/320:bearing cap(inner & outer), wp 50/320:gland (for packing), wp 50/320:stud ( gland), wp 50/320:hex nut (gland nut), wp 50/320:gasket set, wp 50/320:wahser set, wp 50/320:oil seal set, wp 50/320:deflector, wp 50/320:breather plug, wp 50/320:hex screw for 37.2, wp 50/320:wahser (impeller nut), wp 50/320:key (impeller), wp 50/320:key (coupling), wp 50/320:love joy coupling rrs 110/140, vo 80/360 + tch + n:bearing housing, vo 80/360 + tch + n:bush bearing (star), vo 80/360 + tch + n:bush bearing (pump), vo 80/360 + tch + n:impeller, vo 80/360 + tch + n:impeller nut, vo 80/360 + tch + n:drive shaft, vo 80/360 + tch + n:pump shaft, vo 80/360 + tch + n:shaft sleeve (p. end, vo 80/360 + tch + n:coupling sleeve set, vo 80/360 + tch + n:star support, vo 80/360 + tch + n:gasket set, vo 80/360 + tch + n:lock nut (shaft), vo 80/360 + tch + n:lock nut (bearing co, vo 80/360 + tch + n:lock washer (shaft), vo 80/360 + tch + n:lock washer (bearing, vo 80/360 + tch + n:deflector, vo 80/360 + tch + n:coupling set, vo 80/360 + tch + n:ratchet pin, vo 80/360 + tch + n:ratchet collar, vo 80/360 + tch + n:bearing collar, vo 80/360 + tch + n:bearing cap, vo 80/360 + tch + n:adjusting screw, vo 80/360 + tch + n:gland, vo 80/360 + tch + n:gland housing, vo 80/360 + tch + n:gland packing, vo 80/360 + tch + n:lantern ring, vo 80/360 + tch + n:gland ring, vo 80/360 + tch + n:shims, vo 80/360 + tch + n:circlip, vo 80/360 + tch + n:drive column pipe, vo 80/360 + tch + n:pump column pipe, vo 80/360 + tch + n:coupling ring, vo 80/360 + tch + n:coupling nut, vo 80/360 + tch + n:stainer, vo 80/360 + tch + n:volute casing, vo 80/360 + tch + n:bush housing, ar150/510:comp assy, ar150/510:brg hsg, ar150/510:end cover, ar150/510:laybrinth p-end, ar150/510:laybrinth d-end, ar150/510:sleeve, ar150/510:gland, ar150/510:wear plate+insert(b.side), ar150/510:wear plate+insert(s.side), ar150/510:expeller housing, ar150/510:bracket side cover, ar150/510:volute casing, ar150/510:expeller, ar150/510:impeller with nut, ar150/510:flange suc.cover, ar150/510:suction cover, ar150/510:shaft, ar150/510:piston ring, ar150/510:key(impeller), ar150/510:key(cplg), ar150/510:lock nut, ar150/510:dome nut, ar150/510:o ring set, ar150/510:pump pul

Central Government/Public Sector

CTN :45049696

12 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of spare part of sanrok make high tensile tight lock aar-h type center buffer coupler (cbc) for lhb coaches. one set consisting of seven items as follows. item no.-1, knuckle as sanrok drg. no. 1ed-1067 qty. - 01no/set. item no.-2, knuckle thrower as sanrok drg. no. 1ed-1071 qty. - 01 no/set. item no. -3 double rotary lock lift assembly as per sanrok part/drg. 1ed-1076 , 1ed-1074 & 1ed-1149 in assembled condition qty. - 01 no/set. item no.-4 main pin for knuckle of coupler head sanrok drg. no. 1ed-1079, qty. - 01 no/set. item no. -5 support pin to sanrok drg.no. 1ed-1080, qty. - 01 no/set. item no.-6 lock for coupler head sanrok drg no. 1ed-1069, qty. - 01 no/set. item no. 7 manual uncoupling device as per sanrok drg. no.1ed-1017, qty. - 01 no/set. spec:conforming to rdso str no. c-k009 (rev.2) amendment no.2, of nov 2016 and rdso spec no.rdso/2011/cg-03(rev-3). [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :45050309

08 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of thrower for axle box of wag-7 loco as per nei drg. no. nei-x-207(rev.-nil) ref-3. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44802782

30 Apr, 2026 70.63 Lacs

Raichur - Karnataka

Tender For corrigendum : procurement of spares for periodic maintenance of bfp main pumps of model fk-6d-30 of units 5 to 8 - o-ring 0.139 inch x 7.984 inch id spa, thrust pad set for bfp, thrust bearing of bfp, casing stud m48 spares for b, o-ring 0.139 inch x 7.734 inch id spa, journal bearing of bfp, o ring 0.139 inch x 7.484 inch, bfp thrust pads, thrust pads with rtd holes., spring ,disc., breather 1/4 inch npt p.no.75., thrust brg.spligt oil sealring, o ring & back up ring, locking screw (impeller), o ring p.no.67., tapper dowel pin, 12mm, thrust collar part no.56., copper coated gasket of bfp, thrust collar nut p.no.49, oil thrower, glacier thrust brg, balance drum nut., o ring p.no. 12, o ring p.no.10., back up seal, journal bearing p.no.04., oil guard p.no.02., o-ring 0.139 inch x 7.984 inch id spa, thrust pad set for bfp, thrust bearing of bfp, casing stud m48 spares for b, o-ring 0.139 inch x 7.734 inch id spa, journal bearing of bfp, o ring 0.139 inch x 7.484 inch, bfp thrust pads, thrust pads with rtd holes., spring ,disc., breather 1/4 inch npt p.no.75., thrust brg.spligt oil sealring, o ring & back up ring, locking screw (impeller), o ring p.no.67., tapper dowel pin, 12mm, thrust collar part no.56., copper coated gasket of bfp, thrust collar nut p.no.49, oil thrower, glacier thrust brg, balance drum nut., o ring p.no. 12, o ring p.no.10., back up seal, journal bearing p.no.04., oil guard p.no.02., o-ring 0.139 inch x 7.984 inch id spa, thrust pad set for bfp, thrust bearing of bfp, casing stud m48 spares for b, o-ring 0.139 inch x 7.734 inch id spa, journal bearing of bfp, o ring 0.139 inch x 7.484 inch, bfp thrust pads, thrust pads with rtd holes., spring ,disc., breather 1/4 inch npt p.no.75., thrust brg.spligt oil sealring, o ring & back up ring, locking screw (impeller), o ring p.no.67., tapper dowel pin, 12mm, thrust collar part no.56., copper coated gasket of bfp, thrust collar nut p.no.49, oil thrower, glacier thrust brg, balance drum nut., o ring p.no. 12, o ring p.no.10., back up seal, journal bearing p.no.04., oil guard p.no.02.

Central Government/Public Sector

CTN :45019353

08 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126 scrap ferrous material consisting of various type of nut, bolt, rivets, peices of angle, channel, m.s. bracket, draft gear spring washer,m.s. liners,piston, door hinge, door hinge foot, small cut peices of tie bar, beater, clamp, pully side bearer housing, brake wear plate,side bearer housing top and bottom, knuckle pin, knuckle thrower, dog spike, g.i. ohe fitting, bk hanger lever, fish bolt, parts of ctrb bearing, liner, small p.way fittings, bk shoe key, s/pin, pu pad, axle box cover, and inner outer rings, m.s. pins, s/plate, peices of s.s and m.s. pipe, peices of huck bolt fresh cutting, push rod, cbc uncoupling rod, cbc lock and cbc components, safety loop, bk shoe head, released valve, cut peices of m s sheet, plates, buckles, ohe fitting, peices of ms rounds, equalizing lever, bridle bar, shackle stone, shackle, stricker casting wear plate, yoke pin, side bearer liner plate, hand brake wheel, suspension socker, g.i. nut bolt, tension device, main pull rod, cbc uncoupling rod, yoke pin, c.c. pad plate, m.s. round, bk shoe head, bk beam plate, reservoir tank patti, door catch, door check spring, annual repair supporting bracket, signal ground connection parts and other small wagon components and other ferrous items if any.

Central Government/Public Sector

CTN :45019355

08 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98090124 scrap ferrous material consisting of lipped inner race, outer race, thrower, spacer, seal bearing, distance pieces, loose lip etc.

Traction Bond Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors