Traction Motor Scrap Tenders

Get complete information related to latest Traction Motor Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Traction Motor Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Traction Motor Scrap Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :43467490

16 Jan, 2026 NA

Delhi - Delhi

Tender For corrigendum : s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43448164

27 Jan, 2026 NA

Port Blair - Andaman And Nicobar Islands

Tender For supply of electrical and rac items under capstone project of mechanical department at dr. b. r. ambedkar institute of technology (dbrait), sri vijaya puram - supply of electrical & rac items under capstone project, sliding gate motor with rack and pinion(power supply: ac 220v-240v ac, output torque: 27 n-m,motor speed: 1440 rpm, gate speed: 12 m /minute, maxgate weight: 1000 kg, noise: 56 db, limiting switch: springlimit switch, transmitter distance: 50 m, working cycle: 40%, ip class: ip44, operator: ac operator including controlboard, base plate and magnetic limit., remote control: 1 pair(2 nos.), transmitter 4 channels. photo cell: 1 pair (2 nos.)with input power: ac/dc 12-24v, detecting distance max: 15m, ip class: ip55., metal rack: 1 meter rack x 10 nos.,thickness: 09 mm. warranty: 01 year, pinion: 1 extra pinion), power supply cable(4 sq mm, 2 core, pvc insulated), open well submersible pump(5 hp, 65x65, suction / delivery, head range: 30-50 m, rpm: 2800, three phase, voltage: 415v, power rating - 7.3 kw, make: lubi/kirloskar/groundfos), rgb fountain light(s.s body, ip 68, waterproof, output cable length minimum 2 meter, 27 watt. with smps & controller), dol starter(5 hp, 3 phase, 415 v), solenoid valve(waterproof, ip68, s.s body, grade: 304, thread type, size: 1.5 inch, pressure range: 0.5-12 bar, operating voltage: 24 dc, solenoid valve(waterproof, ip68, s.s body, grade: 304, thread type, size: 1 inch, pressure range: 0.5-12 bar, operating voltage: 24 dc), dc smps(10 ampere, 24 volt), arduino- uno r3 board(standard), adapter(5v, 2 amps), relay module(6 output), compressor -r134 a(model name/number: cj513, motor power: 1 hp, capacity: 1 ton, phase : single phase), copper tube(diameter: 1/4 inch, length:15m), high pressure gauge(type: bourdons tube, dial size: 65mm, range: 0-550 psi, connection type:back mounted connection, glycerin filled, thread connection size:1/4 inch, end connection: male), low pressure gauge(type: bourdon s tube, dial size: 65mm, range: 0-550 psi,connection type: back mounted connection, glycerin filled,thread connection size :1/4 inch, end connection: male), digital ammeter(input signal: ac, range: 0-20 amps, supply: 230 v ac ), digital voltmeter(model: smp355, range: 0-300 v ac, display: 0-300 v ac, accclass 0.5, aux: 230 v ac), lp/hp cut out(model: type mp15, pressure range: low side: vacuum up to100 psi (-30 in hg to +100 psi), high side : 0 to 85 psi(approx.), adjustable differential : 0.6 to 7 kg/cm (approx. 9to100 psi) ), temperature indicator (nutronics auto scanner dtim-200m)(sensor input : pt-100, range: 200 degree celsius, supply :230 v ac with selector switch ( 0 - 9 ), refrigerant: freon r 134 a(450g, can), copper brazing rod(thickness - 2 mm), copper brazing rod(thickness - 3 mm), white brazing flux powder(standard, for copper), lpg (can)(225 ml ), capillary tube(internal diameter: 0.5 mm, material: copper), suction accumulator for r134 a(0.5 inch), liquid line filter drier(1/4 inch), capacitor(4 mfd), refrigeration shut off valve(diaphragm hand valve, size: 1/4 inch), wire(2.5 square mm, copper ), refrigerator thermostat(type : rotary adjustable thermostat, control range :1-9temperature range : 5 c to +10 c, power : 220 240 v ac,50 hz,), thermal insulation sleeve(length: 1 meter , inner diameter: 10 mm ), thermal insulation sleeve(length: 1 meter , inner diameter: 15 mm ), electrical insulation tape(standard ), condenser (heat exchanger)(condenser tube outer dia. : 3/8 inch, for 1 hp capacity , r-134a compatible), thermocouple with wire(temperature sensor rtd, pt-100, od: 6mm, length: 4 inch or100 mm)

CTN :43435047

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of 25btpc001 procurement of 30tpd ro and 05tpd edi plant d d -high pressure switch , cartridge filter unit , cartridge filter unit , cartridge filter element , element for cartridge filter , filter element , hp pump motor pulley pulley , hp motor pulley , air pressure reducing valve , shock mount x type , spiral membrane , edi unit , flexible hose with flange 25 nb , lp hose 1 2 bsp x 800 mm lg , lp hose 1 2 bsp x 1700mm lg , hp hose 1 bsp x 3000mm lg , v belt , membrance cleaner i , membrane cleaner ii , membrane cleaner iii , anode plug , 1 2 s s equal nipple , bearing for hp pump , kit valve , kit seal , seal kit , kit valve , mechanical seal lp feed pump water , pump bearing , mechanical seal , pulsation damper , h p relif valve , h p pump relief valve kit , suction damper , low pressure switch , high pressure switch , pressuretransmitter , flowtotaliser , conductivity meter tds meter , edi conductivity meter , conductivity meter , ph meter portable meter , ph meter sensor , pressure gauge 0 7 2 1 2 dia back connection , solenoid valve 3 way , n c solenoid valve coil , n o solenoid valve 2 way , no solenoid valve kit , no solenoid valve kit 2 way , pressure gauge 0 60 bar 2 1 2 dia back connection , pressure gauge 0 100 kg cm2 glycerine filled 1 4 bsp , nc solenoid valve 2 way , n c solenoid valve 2 way , nc solenoid valved kit , servo control valve , servo control valve , voltage monitoring relay 3ph 183 528 vac , programmab le logic unit , dc rectifier , product pump motor , non driving end bearing for feed pump motor , pipe pn16 25 x 2.3 , 2way valve 25 dn 20 , elbow 90 abs 25 , elbow 90 abs 40 , tee 90 equal abs 25 , tee 90 equal abs 40 , tee 90 equal abs 25 20 25 , union 25 dn 20 , union 40 dn 32 , red bush st abs pn 10 d40 25 , adaptor socket nipple abs 40 50 r1 , adaptor socket nipple abs 40 rp 1 , adaptor socket nipple abs 25 32 r 1 , adaptor socket nipple abs 40 50 r1 1 2 , abs nipple 3 4 inch , silica sand , neutralite , module cleaner i , module cleaner ii , module preservative iii , bearing set , pump bearing , level switch high level low level , tds sensor

Loading, Please wait...

Traction Motor Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government