Latest traffic blinker Tenders | Government traffic blinker Tenders

CTN :45741650

21 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of one set of multi cellular barrier of size 1.22m x 0.61m x 1.50m comprising two laterally connected cells, each of size 0.61m x 0.61m x 1.50m as per store list att under job no 0045 , geotextile liner as per store list , accessories with one protective wall basket as per store list , hand gloves as per store list , heavy duty staplers with 04 nos packet of pin as per store list , user handbook as per store list

CTN :45687291

01 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For e- bid for the rate contract of suture material (2026-28) group a3 miscellaneous - cardiac pacing wires electrode blue 60 cm pacing wire, 17 20 mm, circle taper point & 60 mm straight cutting needle with breakaway point, length: 60 cm ( 10 cm), cardiac pacing wires electrode blue 60 cm pacing wire, 26 mm, circle taper point & 90 mm straight cutting needle with breakaway point, length: 60 cm ( 10 cm), steel wire circle cutting ccs 48 mm stainless steel monofilament, size: 5, length: 55 cm ( 10 cm), steel wire circle cutting ccs 48 mm stainless steel monofilament, size: 6, length: 55 cm ( 10 cm), topical skin adhesive skin closure (2-octyl cyanoacrylate) with self-adhesive polyester mesh, size: 22 cm, pack of 2/box, usfda & ce approved, topical skin adhesive skin closure (2-octyl cyanoacrylate) with self-adhesive polyester mesh, size: 60 cm, pack of 2/box, usfda & ce approved, umbilical tape 3 mm 75 cm umbilical cotton tape, length: 75 cm ( 10 cm), biopatch protective disc with chg, antimicrobial dressing, size: 1-inch disk (2.5 cm) with 4.0 mm centre hole, biopatch protective disc with chg, antimicrobial dressing, size: -inch disk (1.9 cm) with 1.5 mm centre hole, biopatch protective disc with chg, antimicrobial dressing, size: 1-inch disk (2.5 cm) with 7.0 mm centre hole, interceed adhesion barrier oxidised regenerated cellulose adhesion barrier, size: 3 4 inch

CTN :45676649

13 Jul, 2026 60.0 Thousand

Thanjavur - Tamil Nadu

Tender For providing solar powered traffic blinkers 2 nos for road safety at oradhanadu division road junction and trichy main road service road within the limits of vallam town panchayat

Central Government/Public Sector

CTN :45652396

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for non ac bangladesh coach. note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25parnabang version 3, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securingthe components: - use steel straps or ropes to fimly anchor the components within thewooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorbshocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify thatall components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638111

20 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of partition frame for lsdd amrit bharat 3.0 ( (note- colour scheme is as per design letter no md48161 dated- 15/05/2026 ), as per drawing: mp26pfgsab3.0 version 0, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed.8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period:30 months after the date of delivery ] ]

CTN :45601303

29 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of hid reader with controller , visitor management system , tripod turnstile , boom barrier 6m , workstation , protective shed , anpr cameras , led tv 55 inch , poe switch , 08 ch nvr , installation and commissioning

CTN :45587499

08 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - outsourcing of services for providing and installation of protective barrier for marina bay

CTN :45448930

20 Jun, 2026 1.07 Crore

Pune - Maharashtra

Tender For corrigendum : tender for supply of desluffer double layer instillation based wound healing system size medimum12x18x1 dash 2 cm compatible with cloud base npwt triage vac machine , desluffer double layer instillation based wound healing system sizelarge 15x26x1 dash 2 cm compatible with cloud base npwt triage vac machine , cycloflo double layer hydrophobic hydrophilic instillation based wound healing system medium size size 12 point 5 x 18 x 1 dash 2cm compatible with cloud base npwt triage vac machine , cycloflo double layer hydrophobic hydrophilic instillation based wound healing system large size 15 x 26 x 1 dash 2cm compatible with cloud base npwt triage vac machine , antimicrobial silver pu foam dressing small size 7 point 5 x 10 x 3 point 3cm compatible with cloud base npwt triage vac machine , antimicrobial silver pu foam dressing medium size 12 point 5 x 18 x 3 point 3cm compatible with cloud base npwt machine compatible with triage vac machine , antimicrobial silver pu foam dressing large size 15 x 26 x 3 point 3cm compatible with cloud base npwt triage vac machine , instillation canister with gel and solution delivery system 500 ml compatible with cloud base npwt triage vac machine , dynamic incision management kit size 4 point 5cm x 20cm compatible with dynamic incision management system , dynamic incision management kit size 4 point 5cm x 25cm compatible with dynamic incision management system , dynamic incision management kit size 4 point 5cm x30cm compatible with dynamic incision management system , dynamic incision management kit size 4 point 5cm x35cm compatible with dynamic incision management system , decellularized human dermis derived from donated human skin preserved in glycerol based solution with 97 percent plus of donor dna removed and sterility assurance level of 10 point 6 allowing for rapid cellular infiltration and revascularization ready to use without rehydration tensile strength of 635 point 4 plus 199 point 9n meshed form size 3x3cm , decellularized human dermis derived from donated human skin preserved in glycerol based solution with 97 percent plus of donor dna removed and sterility assurance level of 10 point 6 allowing for rapid cellular infiltration and revascularization ready to use without rehydration tensile strength of 635 point 4 plus 199 point 9n meshed form size 4x4cm , decellularized human dermis derived from donated human skin preserved in glycerol based solution with 97 percent plus of donor dna removed and sterility assurance level of 10 point 6 allowing for rapid cellular infiltration and revascularization ready to use without rehydration tensile strength of 635 point 4 plus 199 point 9n meshed form size 4x8cm , surgeon gown primary pluse meets , hyaluronic acid dermal fillers , dermal filler gel e point g juvederm , antimicrobial sacrum five layered highly absorbent foam dressing with activated carbon and sliver content 1 point 2mg obliq cm 2 active release for 168 hrs 7 days with self adherent borders and with soft silicone wound contact layer with wound pad absorption layer made up of polyacrylate fibres polyethylene polyester fibres with acquisition and spreading layer made up of polyurethane silver foam with polyurethane backing film as water bacterial and viral barrier a protective release liner made up of polyethylene film product should be usage dash upto 7 days size dash 23x23 cm , five layered self dash adhesive absorbent sacral dressing designed for exuding wounds with soft silicone adhesive wound contact layer with wound pad absorption layer made up of polyacrylate fibres and polyester fibres wound pad acquisition layer made up of polyurethane foam and spreading layer made up of non woven viscose polyester with polyurethane backing film as water bacterial and viral barrier a protective release liner made up of polyethylene film. product should be usage upto 7 days. size 22x25 cm , self adhesive 4 layered absorbent surgical dressing with soft silicone adhesive wound c

CTN :45553170

13 Jul, 2026 90.0 Thousand

Thanjavur - Tamil Nadu

Tender For providing solar powered traffic blinkers 3 nos for road safety at main road pattam main road and thiruppanandal - aduthurai main road in thiruppanandal town panchayat.

Traffic Blinker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector