Latest traffic flow management system Tenders | Government traffic flow management system Tenders

State Government

CTN :45249604

29 May, 2026 24.99 Lacs

Raisen - Madhya Pradesh

Tender For rca for procurement of local purchase material required for operations and maintenance of equipmets of 33 11 kv ss under onm circle raisen - isolator pad clamp for raccoon & dog conductor, 33 kv bushing for ptr suitable for 20 mm stud (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), 11 kv bushing for ptr suitable for 20 mm stud (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), mog(megnetice oil level indicator model-so-6 150 mm suitable for conservator mounting horizontal alarm switch low oil level, mfm suitable for control panel of all makes, c&r panel indicators, expulsion fuse 20 a for capacitor bank ( for 100 kvar unit), expulsion fuse 40 a for capacitor bank ( for 200 kvar unit), brass stud 20 dia suitable for 33 kv bushing (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), brass stud 20 dia suitable for 11 kv bushing (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), winding temperature indicator (wti) , dial 150mm , with capilary, mercury swicth type, oil temperature indicator (oti) , dial 150mm , with capilary, mercury swicth type, tnc switch suitable for control panel of all makes, rubberized cork (gasket) strip size; 80 mmx10 mm, silica gel breather 3 kg casted acrylic plastic body with silica gel, silica gel blue, conical rubber washer for cts (size 12 mm), conical rubber washer for cts (size 16 mm), conical washer (19 mm), trip coil , shunt type 30 volt dc suitable for bhel make vcb specification 30 volt dc, resistance: 4.8 0.1 ohms, outer diameter 42 mm, inner diameter; 16mm (with brass tube) lenth- 93 mm, brass tube length: 98 mm, pluger length: 140 mm, copper wound and varnished with 0.5 meter insulated pvc 1.0 sqmm wire weight, coil: 505 gms, plunger: 126 gms, minimum overall weight of coil:965 gms., trip coil for essun make vcb, trip coil for megawin make vcb specification 30 volt dc, resistance: 4.8 0.1 ohms, outer diameter 42 mm, inner diameter; 16mm (with brass tube) lenth- 93 mm, brass tube length: 98 mm, pluger length: 140 mm, copper wound and varnished with 0.5 meter insulated pvc 1.0 sqmm wire weight, coil: 505 gms, plunger: 126 gms, minimum overall weight of coil:965 gms., auxiliary switch suitable for megawin make 11 kv vcb, auxiliary switch suitable for bhel make 11 kv vcb, bridge rectifier for battery charger., trip coil 30 volt dc suitable for stelmec with assembly, operating voltage: 3.5 0.1 ohm, closing coil with assembly for make stelmec 11kv vcb 30v dc,coil resistance 3.5 0.1 ohm, trip coil suitable for schneider make vcb with assembly 30 v dc,coil resistance 8.7 0.1ohm ,outer diameter 46mm,inner diameter 16mm,height 40mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 225gms., trip coil suitable for cgl make 11kv vcb with assembly 30 v dc,coil resistance 2.4 0.1ohm ,outer diameter 51mm,inner diameter 20mm,height 48mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 300gms., limit switch motor for 11kv & 33kv cgl vcb, trip coil with plunger for shreem make vcbs 30 v dc,coil resistance 3.9 0.1ohm ,outer diameter 51mm,inner diameter 26mm,height 51mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 395gms., 33 kv trip coil suitable for stelmec make vcb, auxiliary switch suitable for stelmec make vcbs, spring charging motor for bhel make vcb 230vac/220 dc/880 watt, 11kv vacuum interrupter suitable for stelmec vcbs model type/wl/34599m3+, spring charging motor suitable for stelmec make vcbs 220ac/dc 150 watts nl -rpm 10, spring charging motor suitable for crompton make vcb 220ac/dc 150 watts nl -rpm 10, trip coil 30 volt dc suitable for cg 33 kv vcb with assembly., big gear suitable for stelmec vcb, small gear for stelmec vcb, 11kv drive rod make magawin, 11kv drive rod make bhel, 11 kv insulating pull rod 11 kv bhel make vcb, single phase 500 watts hand drill machine bid dia size 2mm to 10mm, pg clamp

Central Government / Public Sector

CTN :45077996

08 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For analog dial indicator, range: 0 mm - 1 mm with least count : 0.001mm as per product code no. 2109a/ 2109ab of m/s. mitutoyo make or its equivalent in m/s. starrett/ insize makes as per technical specifications mentioned below. 1) measuring force : 1.5n or less. 2) accuracy : +/- 0.005mm. 3) contact point : carbide tipped. 4) jeweled bearing type : yes. 5) unique shock-proof mechanism, oil/ water resistant(o-ring sealed) type : yes. 6) provided with flat back or lug back for mounting purposes note: (1) one sample should be got approved before effecting bulk supply. (2)firm shall quote for any one make mentioned in the tendered description along with valid authorization. if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. (3) item to be supplied along with valid calibration test certificate of 01 year validity period from nabl accredited /govt. labs. (4) warranty certificate shall be submitted along with the material in the name of sse/m7/els/bza [ warranty period: 12 months after the date of delivery ]

CTN :45273672

01 Jun, 2026 1.37 Crore

Pune - Maharashtra

Tender For repair, reconditioning and maintenance of 12 x 8 m - 5 nos radial gate, rg hoist 42 ton cap. - 5 nos. by replacing old wornout both side and bottom rubber seal, replacing old wornout dial indicator assembly new one, carring out welding wor

CTN :45063879

30 May, 2026 NA

Khorda - Odisha

Tender For corrigendum : supply of inserts -vpgx220608pder-e10h25, make-seco , inserts -x0mx10t304tr-me07,f40m, make-seco , inserts - x0mx10t308tr-me07,f40m, make-seco , inserts - xnex080608tr-me09,f40m, make-seco , inserts - xpkx12t304pder-e08,h25, make-seco , absolute coolant proof digital caliper 0-150, 500-712-20, make-mitutoyo , absolute coolant proof digital caliper 0-300, 500-714-20, make-mitutoyo , general vernier caliper 0-130, 532-010, make-mitutoyo , dial test indicator 513-404-10e, make- mitutoyo , dial test indicator 513-415-10e, make-mitutoyo , dial test indicator 513-405-10e, make-mitutoyo , centering holer-901959, make-mitutoyo , magnetic stend 7032-10, make-mitutoyo , contact point 103006, make-mitutoyo , contact point 136013, make-mitutoyo , contact point 190653, make-mitutoyo , contact point 137558, make- mitutoyo , contact point 21cza201, make-mitutoyo , outside micrometer digital 0-30mm, make-tesa , outside micrometer digital 25-50mm, make-tesa , outside micrometer digital 50- 75mm, make-tesa , outside micrometer digital 100-125mm, make-tesa , digital vernier caliper - carbide tip, 0-150mm, make-tesa , digital vernier caliper - carbide tip, 0-300mm, make-tesa , micro-hite 350 digital hight gauge 0-350mm 0- 14inch, item no-00730073, make- tesa , outside micrometer mechanical-manual, 125-150mm make-mitutoyo , outside micrometer mechanical-manual, 150-175mm make- mitutoyo , inside 3 pin micrometer 6-12mm, make-mitutoyo , inside 3 pin micrometer 12-20mm, make-mitutoyo , inside 3 pin micrometer 20-25mm make-mitutoyo , inside 3 pin micrometer 25-30mm make-mitutoyo , inside 3 pin micrometer 35-40mm make-mitutoyo , inside 3 pin micrometer 40-50mm make-mitutoyo , inside 3 pin micrometer 50-60mm make-mitutoyo , inside 3 pin micrometer 60-70mm make-mitutoyo , flange micrometer 0- 25mm, make-mitutoyo , flange micrometer 50-75mm, make- mitutoyo , dial test indicator model no-1003mahr 0.001mm, make-mahr -millimess , radial pole circular magnetic chuck id no-mag.nr150c, make-eclipse

CTN :45252168

02 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of lv2icvs 2530006254 765-33-sb186 arm axle , lv1r72 54.28.67sb.1 hose assy grease gun , lv1r72 172.44.001 sendg unit elec spedometer modelme301b , lv1r72 175.41.018sb yoke , lv1r72 172.33.500 dipstick , k9 p11-5-000 control indicator p11-5 , lv1r90 188.34.003sb lh valve , lv1r72 175.95.074sb wrench s14 for support roller labyrinth , lv1r72 555.047sb brush , lv2icvs 6685-004992 675-78-sb109 monometer gauge presure dial indicatg

Central Government/Public Sector

CTN :45267577

01 Jun, 2026 NA

Delhi - Delhi

Tender For supply of micro controller based electronic speed indicating & recording system without indicator to rdso specn no.mp-0-3700-07 (rev-07) of august-2017 type mrt 918 r, 110 volt dc, dial range 0-160 kmph consisting of (1). recorder cum indicator -01 no (2). speed sensor- 01 no. (3). junction box -01 no (4).connecting cable -01 set (5). mounting accessories - 01 set make: medha technical -suitable for 1400 hhp/dpc/demu. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45227718

27 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of dial snap gauge to range 175mm to 200mm with analog dial of least count 0.001mm to model no 543-391 series no 201-108 with dial indicator or similar model of precision or stareett or mahr-federal. calibration certificate is required, traceable to nabl. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :44857363

19 May, 2026 NA

Avadi - Tamil Nadu

Tender For corrigendum : digital wheel diameter gauge fitted with digital dial indicator. specification: range: 800 to 1100 mm accuracy through vernier scale 0.01 mm, dial indicator range 12 mm. gauge should be suitable to measure wheel dia in open and fitted condition for all type of railway coaches and wagon., fitted with spring loaded dial indicator plunger with locking device, supply in suitable carry box with 01 year calibration certificate from nabl approved lab. make: aoge/pie/ganapathy [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45242094

19 May, 2026 NA

Multi City - Multi State

Tender For digital wheel diameter gauge fitted with digital dial indicator. specification: range: 800 to 1100 mm accuracy through vernier scale 0.01 mm, dial indicator range 12 mm. gauge should be suitable to measure wheel dia in open and fitted condition for all type of railway coaches and wagon., fitted with spring loaded dial indicator plunger with locking device, supply in suitable carry box with 01 year calibration certificate from nabl approved lab. make: aoge/pie/ganapathy [ warranty period: 30 months after the date of delivery ] ]

CTN :45241254

01 Jun, 2026 NA

Howrah - West Bengal

Tender For digital wheel diameter gauge with measuring range 800-1100 mm with least count +/-0.01mm fitted with digital dial indicator, accuracy 0.01mm. supply should be made along with calibration certificate and suitable hard carry case with handle, lock & key. [ warranty period: 30 months after the date of delivery ] ]

Traffic Flow Management System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector