Latest traffic signal machine Tenders | Government traffic signal machine Tenders

State Government

CTN :45231232

08 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by the contractor.

CTN :45261986

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap includes various types and sizes of electronic panels such as signalling panels, block signalling panels, electrical panels, tele communication panels, ht panels, electronic panels, pcb, relay racks, ct racks, data loggers, token systems, block systems, diodo tokenless systems, instruments, ip panels, and electronic junction boxes with or without circuits and negligible nf attachments, in complete or broken condition, timeler relay as well as other similar, known or unknown pannels, this is not appropriate for railway. condition: - (1) the lot will be sold on an "as-is, where-is" basis. the provided lot weight is visually an estimate. (2) no claims regarding the material's quality, quantity, or condition will be entertained after the sale. 3. purchaser are requested to visit the condition of the lot before bidding. because this lot is prepared for cleaning purpose and mixed with light weight left over material of various previous lot. location: - west side of godown no-98/4, south side of 98/4 ,98/3 & beside 98/13. lbpl, dbaw, gst-18%, tcs-1%, hsn code-853590 , allocation-20714208

Central Government/Public Sector

CTN :44931970

13 May, 2026 NA

Ajmer - Rajasthan

Tender For design, manufacture, supply, installation, testing and commissioning of microprocessor based electronic interlocking system (rdso spec no. rdso/spn/192/2019 ver. 2 with latest amendment) at budha pushkar (alteration, indoor & outdoor work), pushkar, nand, kod, riyan, bhesra kalan, katyasani stations along with supply, installation, testing and commissioning of various indoor & outdoor signalling & telecom systems/gears.the work includes excavation of trench, laying of cables in polyolefin duct/rcc half round pipes/gi pipe/dwc/hdpe/trench etc., casting of foundations of macls signals/apparatus cases, supply-installation of point machines, apparatus cases, macls signals, track circuit equipment (dc track circuit & single msdac in all stations yards), earthing, data loggers, eld, facs, afdas, iot based rdpms etc.the work includes addition/alteration in the existing electronic interlocking (kyosan make ei) at budha pushkar station & associated indoor and outdoor works in c/w new bg line in pushkar - merta section.the work also includes signalling and telecom work for shifting of existing s&t gears (lc gates, signals and location boxes, s&t cables, hassdac/ssdac, etc.) for removal of infringements of s&t gears coming in alignment of new bg line.the telecom work includes design, supply, installation, configuration, testing and commissioning (sitc) of telecom indoor and outdoor equipment including ip-mpls system with power supply arrangement, trenching, laying, jointing and termination of 4*48 fibre optical fiber cable (two on each side of the track) cable along with fibre management system & telecom asset management system and 6 quad cable along with provision of passenger amenities including ipis at pushkar & katyasani and other telecom works at stations, block sections, tss/sp/ssp etc. in c/w new bg line work in pushkar - merta section of ajmer division of north western railway.

Central Government/Public Sector

CTN :44934733

29 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap ms s&t released items of sort and sizes including, junction box, stop signal, shunt signal with offset, point machine body , signal pole, signal ladder, unit to aspect, route drum, rodding set, location box, gate boom, signal base, shunt signal, point d bracket, route drum, impedance bond cover, protection cover, half location frame, signal post, plunger, ladder assay, offset bracket, point machine without motor, ground connection/point rodding, ms battery box, gate meeting post, gate pedestal, gate gear box, empty cabinet, strips, plates, rods, transmission assemble, levers, pipes, ladder, fabrication angle channels, signalling electrical substation machinery parts fittings, nut bolts, signalling poles, point motor, supporting patti, fuse alarm box, power supply box, rail deflector, point jb, aftc tu jb, relay and all kind of signalling items and other miscellaneous ms gi and ci fittings with or without n/f and other attachments. nf without attachment will not be delivered. note- cutting allowed only for location boxes for easy loading at the time of delivery. location - b by 1

Central Government/Public Sector

CTN :44894378

22 Apr, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous and miscellaneous, material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, rubber items ,spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, plastic, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. wooden and railway track shall be excluded from the lot if found any.digging will be permitted only

Central Government/Public Sector

CTN :44738226

09 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap ms s&t released of sort and sizes including, junction box, stop signal, shunt signal with offset, point machine body , signal pole, signal ladder, unit to aspect, route drum, rodding set, location box, gate boom, signal base, shunt signal, point d bracket, route drum, impedance bond cover, protection cover, half location frame, signal post, plunger, ladder assay, offset bracket, point machine without motor, ground connection/point rodding, ms battery box, gate meeting post, gate pedestal, gate gear box, empty cabinet, strips, plates, rods, transmission assemble, levers, pipes, ladder, fabrication angle channels, signalling electrical substation machinery parts fittings, nut bolts, signalling poles, point motor, relay and all kind of signalling items and other miscellaneous ms gi and ci fittings with or without n/f and other attachments. nf without attachment will not be delivered. note- cutting allowed only for location boxes for easy loading at the time of delivery. location - d by 1

Central Government/Public Sector

CTN :44568749

30 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items-suchas ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. andallother types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks,rodsangle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank,pantographwith or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt barsrods, pulley,rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet,various typessleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junklightweight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter,lightweight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort andsizes,g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle,pan,frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighingmachine,electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, footplate,step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their componentandwiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings,pins,screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axleboxhousings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, etc. longerhanger,spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspensionlevers,compressor spares, tension rods bushes, dash pots, collars, vehicle spares, ci items consisting ofrusty and dustydrainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pigirons pieces,signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds,ms rack,almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic,mica, foamseat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, partsof pointmachine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler,knuckles,cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, andassorted cutpieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer raceof bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fanarmatures, chain sling, rev. centre, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silentblocks, cutpieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail,of sorts andsizes with or without parts, fittings, and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found willnot be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. excluding items -rubber/wooden /plastic/ material and shed.

Central Government/Public Sector

CTN :44568751

30 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- suchas ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and allother types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rodsangle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantographwith or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley,rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various typessleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk lightweight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, lightweight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes,g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan,frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine,electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate,step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component andwiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins,screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle boxhousings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, etc. longer hanger,spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers,compressor spares, tension rods bushes, dash pots, collars, vehicle spares, ci items consisting ofrusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pigirons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds,ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic,mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, partsof point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler,knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, andassorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. centre, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silentblocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail,of sorts and sizes with or without parts, fittings, and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. excluding items -rubber/wooden /plastic/ material and shed.

Traffic Signal Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector