Tender For various types of furniture materials - table 3 x 6 1. size:3 feet (width) 6 feet (length) 2.5 feet (height) approximate.2. material:frame and legs made of seasoned teak wood (moisture content 10%).tabletop made of 18 25 mm thick isi-marked commercial board / plywood, of approved quality.all wooden parts shall be termite-proof and kiln-seasoned.3. top finish:top covered with 1 mm thick laminate (matte / glossy) of approved shade and brand.all edges sealed with 2 mm pvc edge banding or polished teak beading.surface to be smooth, scratch-resistant, and heat-resistant.4. drawers & box unit:three lockable drawers on one side, mounted on telescopic channels for smooth sliding.one storage box / cupboard with hinged door and locking arrangement on the other side.all drawers and box interiors finished with melamine or laminate.5. legs & frame:made from solid teak wood sections (minimum 2 2 ), joined with proper mortise and tenon joints.cross supports / bracing provided for additional rigidity and strength.6. hardware:branded locks, handles, channels, and hinges (e.g., godrej / hettich / ebco or equivalent).high-quality adhesive and screws used for assembly.7. polish / color:melamine / pu polish in natural teak, walnut, or as approved by the department.uniform finish without marks or uneven coating.8. quality requirements:table must be sturdy, termite-resistant, moisture-protected, and wobble-free.workmanship should be neat and conform to standard office furniture design.minimum load-bearing capacity: 75 kg distributed load on tabletop.9. warranty:minimum one-year warranty against manufacturing or structural defects., table 4 x 6 1. size:4 feet (width) 6 feet (length) 2.5 feet (height) approximately.2. material:frame & legs: made of first-class seasoned teak wood, moisture content not exceeding 10%.top: 25 mm thick isi-marked commercial board / plywood of approved brand and grade.drawer & box components: 18 mm commercial board with teak wood beading on exposed edges.all materials must be termite-proof, moisture-resistant, and well-seasoned.3. top finish:tabletop finished with 1 mm thick premium laminate (matte or glossy) of approved shade and brand (e.g., greenlam, century, merino).edges: 2 mm pvc edge banding or solid teak beading, finely polished.surface should be smooth, scratch-resistant, and heat-resistant.4. drawers and storage box:three lockable drawers on one side with telescopic channels for smooth movement.one storage box / cupboard with hinged door and individual lock on the same side.all drawers to have soft-closing mechanism and branded locks/handles (godrej / hettich / ebco or equivalent).inner surface of drawers and box to be laminated / melamine-coated for a clean finish.5. frame and support:legs of solid teak wood (2" 2" or heavier section) with cross bracing for strength.all joints properly mortised and tenoned, fixed with wood adhesive and screws for rigidity.table should be wobble-free and stable.6. polish / color:pu or melamine polish of natural teak / walnut / oak shade (as approved).finish to be uniform, smooth, and glossy.7. hardware & accessories:all fittings (locks, hinges, channels, handles) to be branded and rust-proof.cable hole with grommet on top for wiring management.8. quality & strength:structure must be durable, termite-resistant, and long-lasting.tabletop load-bearing capacity minimum 100 kg (uniform load).corners rounded for safety and aesthetics.9. warranty:minimum one-year comprehensive warranty against any manufacturing or structural defect., computer table1. size:approx. 1200 mm (l) 600 mm (w) 750 mm (h)(4 feet 2 feet 2.5 feet)2. material:top: 18 25 mm thick pre-laminated particle board / mdf board / plywood, isi-marked, of approved brand (e.g., century, greenply, action tesa).frame / legs: mild steel (ms) tubular frame (25 mm 25 mm 1.2 mm thick) with powder coating, or solid wood frame as specified.keyboard & cpu units: same material as tabletop (laminated board).3. c
Tender For supply of removal and disposal of old tile and fittings , supply and fitting of wall tile and floor tile , supply and fitting of grid ceiling 2ft x 2ft , mdf door with frame , rajashree door with fittings , upvc widows , pvc storge box , supply and fitting of exhaust fan , bath room plumbing wiring materials , table top wash basin , urinal , urinal partition , western commode , indian pan , pillar cock , 2 in 1 bib cock , health faucet , angle cock , coupline , flance , steel jali , towel rail , soap stand , round towel rail , hand wash dispenser , tissue paper holder , hand dryer , mirror with frame , connect pipe , waiste pipe , ceiling lights , electric wires 2 mm , modular board with switches , conceal head with cover , service charges
Tender For corrigendum : supply of sitc of 24 core single mode armoured optical fiber cable , sitc of 12 core single mode armoured optical fiber cable , sitcof 50 pair jelly filled outdoor telephone cable , sitc of 20 pair jelly filled outdoor telephone cable , sitc of 15u wall mount networking rack with all accessories , sitc of 24 port rack mount liu fully loaded with sc to sc couplers , sitc of 12 port rack mount liu fully loaded with sc to sc couplers , sitc of 100 pair plus 100 pair main distribution box , sitc of 50 pair plus 50 pair main distribution box , sitc of hdpe pipe size 40mm , sitc of gi pipe size 65mm , sitc of sc to lc single mode 3mtr fiber patch cord , sitc of sc to lc single mode 1mtr fiber patch cord , sitc of cat6 utp cable 305mtr roll , sitc of cat6 patch cord 3mtr , sitc of cat6 patch cord 1mtr , sitc of mdf with internal pipe for entry of cables cable glands , sitc rcc chambers with precast rcc cover with lifting hooks , sitc of joint enclosure for 24 core ofc jointing work , sitc of joint enclosure for 12 core ofc jointing work , laying clamping of 24 core and 12 core ofc in duct , laying clamping of 50 pair and 20 pair telephone cable , sitc of cable route markers as per specifications , digging of soft soil and backfilling as per original site condition , digging of hard concrete surface road crossing and refilling , machine horizontal directional drilling hdd for crossing hard surface , otdr report and power meter testing , supply design and provide auto cad as built drawing
Tender For supply of supply of optical fiber cable cable,supply of plb hdpe pipe,supply of 48 port line interfaceunit,supply of sc pigtails,supply of lc-sc patch cord,supply of optical fiber cable joint enclosures,supply of 50 pair jelly filled armoured cable,supply of 20 pair jelly filled armoured cable,supply of cable pulling rodder,supply of 50 pair mdf box,supply of line surge protector,supply of gigabit sfp transceiver,supply of soil treatment earth enhancing compound,excavation and laying of plb pipe,laying of optical fiber cable cable,laying of 50 pair jelly filled copper cable,laying of 20 pair jelly filled copper cable,construction of cable inspection chamber,supply and laying of b class g.i pipe,installation and testing