Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficienc y level 3 of rating 500 kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer ta nk body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (ve ctor symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low volt age bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 20 0 kva) for variation of hv voltage from +5% to -10% in steps of 2.5%. following has to be submitted by su pplier along with supply of material: (i) type test report of transformer having same rating, make (& mode l if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:11 80 (part 1) latest. supply of outdoor type , plinth mounted, distribution transformer, minimum energy effici ency level 3 of rating 500kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star ( vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment n os. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) late st with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicato rs will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low volta ge side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 kva) for variation of hv voltagefrom +5% to -10% in steps of 2.5%. following has to be submitted by s upplier along with supply of material: (i) type test report of transformer having same rating, make (& mod el if any) and design from nablaccredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates a s per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1 180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : procurement of lab instruments for chemical lab of ogcd, dtps, htps, kasimpur - sension5 portable conductivity meter specification range:#conductivity s/cm 0 to 19.99; 200 to 1999#conductivity ms/cm 2 to 19.99; 20 to 199.9#tds: 0 to 50,000 mg/l as nacl salinity: 0 to 42 g/l (ppt)#temperature: -10.0 to 105.0 c#resolution:#conductivity 0.01; 1.0#conductivity ms/cm 0.01; 0.1#tds: 0 .00-199.9 mg/l 0.1mg/l 2 00-1999 mg/l 1 mg/l 2 .00 -19.99 g/l 0.01 g/l 2 0-50 g/l 0.1g/l #salinity: 0.1 g/l (ppt)#temperature: 0.1 c#accuracy:#conductivity: 0.5% in the first 3 ranges, 1% at highest range #td of full scale #salinity: 0.1 ppt (-2 to 35 c) #temperature: 0.1 c# , make-hach, ph meter probe (ph meter sension ph3) cat no-lzw5010t.92.0002 make hachdetails in photograph enclosed in tender document, manual sieves shaker (with sieves set - mesh size-50,+100,+200) any standard make details in photograph enclosed in tender document, centrifugal machine for oil testing, any standard maketube capacity:no.12-24:size 15 mlshould have a digital timerbody should be made of strong fabricated & corrosion resistant steel.control panel- for start/stop switch, dynamic brakes, step less speed regulator with zero start switch & speed indicator with timer and protective fuses.door interlock.maintenance free brushless drive motor with exact speed preselection and display. speed range 100 to3000 rpm and above, accuracy 1 rpm. details in photograph enclosed in tender document, orset appratus (complete set), any standard make details in photograph enclosed in tender document, ph 2700 ph meter specification #ph range -2.000 to 20.000 ph #resolution 0.1 / 0.01 / 0.001 ph #accuracy 0.002 ph + 1 lsd #cal. points up to 6 preset or 5 custom #buffer sets usa, nist, din, user 1, user 2, custom #or range 2000.0 mv #rel. mv range 2000.0 mv on 0.1 mv# accuracy 0.2 mv #temperature,range (meter) 0.0 to 100.0 c / 32.0 to 212.0 f #resolution 0.1 c / 0.1 f #accuracy 0.3 c / 0.5 f #compensation atc / mtc #power requirements 9 v dc adapter, 1.3 a (100/240 vac, smps)# make- eutech
Tender For corrigendum : tender for replacement of winding temperature indicator and oil temperature indicator three sets and nine siemens make contactors in the buchholz relay circuit of three generating unit transformers, along with complete repair and restoration of the p
Tender For supply of fuses , rheostat sliding type , capacitors , various electronic components , various lamps , plug socket piano switch , cables , bus bar with brackets , rubber mat , electrician helmet , rcc pole with accessories , safety belt , ohm meter series type shunt type portable box type , digital multi meter , a.c. voltmeter m.i. analog, portable box type housed in bakelite , milli voltmeter centre zero analog, , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi, analog, portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a.c. energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , megger , 3- point d.c. starter , 4- point d.c. starter , wheat stone bridge with galvanometer and battery , single phase variable auto , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering , discrete component trainer , linear i.c. trainer , digital i.c. trainer , domestic appliances , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. shunt generator with control panel , motor- generator ac to dc , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker , dc series motor coupled with spring balance load , dc shunt motor , dc compound motor with starter , motor generatordc to ac set consisting , ac squirrel cage motor with star delta , ac phase-wound slip ring motor with starter switch , universal motor with starterswitch , synchronous motor with accessories like starter, excitation , thyristor igbt controlled d.c. motor drive with tacho-generator , thyristorigbt controlled a.c. motor drive with , single phase transformer, core type, air cooled , three phase transformer, shell type oil cooled with delta star , electrical machine trainer , diesel generator set with changeover switch over cut , used dc generators-series, shunt and compound type for overh , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , wiring board , metal rack , black boardwhite board , fire extinguisher co2 , fire buckets
Tender For supply of 70-70 nos. of oil temperature indicator and winding temperature indicator at various 33/11 kv sub-stations in the jurisdiction of electrical distribution division-i/ii, baraut/bagpat/khekra under electrical testing division, baghpat.
Tender For supply of oil temperature indicator, 2 contacts, 6 meters length, rectangular type & accuracy 1% , winding temperature indicator, 4 contacts, 6 meters length, rectangular type & accuracy 1% , , oti sensor unit (remote indicator-1 no+ ccu 4-20 ma outputs-1 no) , wti sensor unit (remote indicator-1 no+ ccu 4-20 ma outputs-1 no) , ccu 4-20 ma for ambient temperature measurement , ccu 4-20 ma for oltc diverter temperature measurement
Tender For tender for supply of mt spare bush d d - 41681m58040 bush , 6680 000506 cable assy speedometer , 23710m83043 cable assy clutch , 09283 26016 oil seal , 5945 905916 relay turn signal , 17700m83112 radiator assy , 2540 006508 regulator assy rh , 2520 72 0000522 master cyl power unit clutch master cyl , 2574 5420 9981 speedometer cable 3.2 dia 4300mmlong , 29971 83050 oil seal , 9330 000106 sheet cellular 37mm thick 2m 1m , 2930 000684 tank water reserve , 13650m50g20 sensor water temperature , 5850 000336 lamp assy side turn signal rh , x 2703600 shaft seal , x 2703400 shaft seal , 2590 024062 cable assy control , 2157 5440 0114 assy head lamp with halogen bulb lh , 2574 5441 0134 assy tail lamp rh , f 7875600 front direction indicator , 2157 5440 0115 assy head lamp with halogen bulb rh , 11110m52g12 head assy cylinder , f 7473900 alternator assy