Latest transformer breather Tenders | Government transformer breather Tenders

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

State Government

CTN :45510332

22 Jun, 2026 NA

Jamnagar - Gujarat

Tender For supply of silica gel indicating type (blue) for ht / lt bus duct, power and service transformers breather as moisture absorbent at stps

State Government

CTN :45527664

30 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work of cleaning maintenance and overhauling of various lt mcc generator phase and neutral links generator bus duct excitation transformer lavt and..

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

corporations/Associations/Others

CTN :45411073

10 Jun, 2026 NA

Chamba - Himachal Pradesh

Tender For auction sale of transformer with olt and complete in all respect 33/11 kv 6.3 mva, etc,11 kv 350 mva 400 amp type kad oil circuit breaker with accessories. etc,390 kv, 20 ka surge arrestor with surge counter & terminal (mixed scrap),1000 kva step up transformer (11 kv/415v). (mixed scrap),mixed scrap (mixed iron, copper, aluminum) of excitation system, etc,mixed scrap (mixed iron, copper, cable scrap) of dismantled, etc,miscellaneous mixed scrap (mixed iron, copper, cgi sheet)

CTN :45048307

30 Jun, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

CTN :45271786

10 Jun, 2026 NA

Rajauri - Jammu And Kashmir

Tender For rate contract for supply of material required for repair/maintenance /restoration of 33kv lines and 33/11kv receiving stations in respect of std-iv kalakote, for the year 2026-27 or till next contract. - 33 kv & 11 kv cable kits indoor/outdoor (make hot set or any other reputed make conforming to relevant is specifications) a) cable kits 33 kv single core heat shrinkable indoor 630 mm2, b) cable kits 33 kv single core heat shrinkable indoor 300 mm2, c) cable kits 33 kv single core heat shrinkable outdoor 630 mm2, d) cable kits 33 kv single core heat shrinkable outdoor 300 mm2, e) cable kits 11 kv single core heat shrinkable indoor 630 mm2, f) cable kits 11 kv single core heat shrinkable outdoor 630 mm2, g) cable kits 11 kv 3 core heat shrinkable indoor 400 mm2, h) cable kits 11 kv 3 core heat shrinkable indoor 300 mm2, i) cable kits 11 kv 3 core heat shrinkable indoor 240 mm2, j) cable kits 11 kv 3 core heat shrinkable indoor 185 mm2, k) cable kits 11 kv 3 core heat shrinkable indoor 120 mm2, l) cable kits 11 kv 3 core heat shrinkable outdoor 400 mm2, m) cable kits 11 kv 3 core heat shrinkable outdoor 300 mm2, n) cable kits 11 kv 3 core heat shrinkable outdoor 240 mm2, o) cable kits 11 kv 3 core heat shrinkable outdoor 185 mm2, p) cable kits 11 kv 3 core heat shrinkable outdoor 120 mm2, q) cable kits 11 kv 3 core (straight through joint), heat shrinkable 120 mm2, r) cable kits 11 kv 3 core (straight through joint), heat shrinkable 185 mm2, s) cable kits 11 kv 3 core (straight through joint), heat shrinkable 240 mm2, t) cable kits 11 kv 3 core (straight through joint), heat shrinkable 300 mm2, u) cable kits 11 kv 3 core (straight through joint), heat shrinkable 400 mm2, v) cable kits 11 kv single core (straight through joint), heat shrinkable 630 mm2, w) cable kits 33 kv single core (straight through joint), heat shrinkable 630 mm2, 11 kv cts of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm for 11 kv ocb/ vcb panelsi) 800/400/5-5, ii) 750/375/5-5, iii) 600/300/5-5, iv) 400/200/5-5, v) 300/150/5-5, vi) 150/75/5-5, spares for power transformersa) breather for 6.3 mva 33/11 kv transformer (2 kg), b) breather for 1.6 mva 33/11 kv transformer (kg), c) breather for 3.15 mva 33/11 kv transformer (kg), d) breather for 10 mva 33/11 kv transformer (3 kg), e) breather for 5 mva 33/11 kv transformer (2 kg), f) 20 mm lt bush rod for 33/11 kv transformer, g) 12 mm lt bush rod for 33/11 kv transformer, h) 20 mm copper bush rod assembly for 33/11 kv, 10 mva power transformer with oil seal, i) 12 mm copper bush rod assembly for 33/11 kv, 6.3 mva power transformer with oil seal, j) silica gel, k) oil seal for 33/11 kv power transformer, l) adaptor for bush rod extension for 33/11 kv power transformers, relays a) numerical relay (24-50 v) 3 o/c and 1 e/f relay of different make .(scada compatible), b) numerical relay (24-50 v) 3 o/c and 1 e/f relay of different make.(non-scada compatible), c) master trip relay 24-50 v ,of different make, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification a) 33 kv pin insulator with pins (porcelain type), b) 33kv pin insulators for panther conductor with pins (polymer type), c) 33kv pin insulators for wolf conductor with pins (polymer type), d) 33kv pin insulators for dog conductor with pins (polymer type), e) 33 kv g.i. pins, f) 11 kv pin insulator (polymer type) with pins, g) 11 kv pin insulator (porcelain type) with pins, h) 11 kv g.i. pins, i) 11 kv disc insulator (b & s type) 70 kn (porcelain type), i) 11 kv disc insulator (b & s type) 120 kn (porcelain type), j) 33kv disc insulators (polymer type), k) 33 kv post insulator, l) 22 kv post insulator, m) 11 kv post insulator, n) drive insulator of sorts, o) shackle insulator, p) 11 kv guy insulator, q) 33 kv guy insulator, 33 kv tension fittings for acsr dog conductor, b&s 3 u-bolts type, 33 kv tension fittings for acsr wolf

CTN :45277957

10 Jun, 2026 NA

Rajauri - Jammu And Kashmir

Tender For rate contract for supply of materials for 33kv lines and 33 by 11kv recieving stationsfor the year 2026-27. - 33 kv & 11 kv cable kits indoor/outdoor (make hot set or any other reputed make conforming to relevant is specifications) a) cable kits 33 kv single core heat shrinkable indoor 630 mm2, b) cable kits 33 kv single core heat shrinkable indoor 300 mm2, c) cable kits 33 kv single core heat shrinkable outdoor 630 mm2, d) cable kits 33 kv single core heat shrinkable outdoor 300 mm2, e) cable kits 11 kv single core heat shrinkable indoor 630 mm2, f) cable kits 11 kv single core heat shrinkable outdoor 630 mm2, g) cable kits 11 kv 3 core heat shrinkable indoor 400 mm2, h) cable kits 11 kv 3 core heat shrinkable indoor 300 mm2, i) cable kits 11 kv 3 core heat shrinkable indoor 240 mm2, j) cable kits 11 kv 3 core heat shrinkable indoor 185 mm2, k) cable kits 11 kv 3 core heat shrinkable indoor 120 mm2, l) cable kits 11 kv 3 core heat shrinkable outdoor 400 mm2, m) cable kits 11 kv 3 core heat shrinkable outdoor 300 mm2, n) cable kits 11 kv 3 core heat shrinkable outdoor 240 mm2, o) cable kits 11 kv 3 core heat shrinkable outdoor 185 mm2, p) cable kits 11 kv 3 core heat shrinkable outdoor 120 mm2, q) cable kits 11 kv 3 core (straight through joint), heat shrinkable 120 mm2, r) cable kits 11 kv 3 core (straight through joint), heat shrinkable 185 mm2, s) cable kits 11 kv 3 core (straight through joint), heat shrinkable 240 mm2, t) cable kits 11 kv 3 core (straight through joint), heat shrinkable 300 mm2, u) cable kits 11 kv 3 core (straight through joint), heat shrinkable 400 mm2, v) cable kits 11 kv single core (straight through joint), heat shrinkable 630 mm2, w) cable kits 33 kv single core (straight through joint), heat shrinkable 630 mm2, 11 kv cts of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm for 11 kv ocb/ vcb panelsi) 800/400/5-5, ii) 750/375/5-5, iii) 600/300/5-5, iv) 400/200/5-5, v) 300/150/5-5, vi) 150/75/5-5, spares for power transformersa) breather for 6.3 mva 33/11 kv transformer (2 kg), b) breather for 1.6 mva 33/11 kv transformer (kg), c) breather for 3.15 mva 33/11 kv transformer (kg), d) breather for 10 mva 33/11 kv transformer (3 kg), e) breather for 5 mva 33/11 kv transformer (2 kg), f) 20 mm lt bush rod for 33/11 kv transformer, g) 12 mm lt bush rod for 33/11 kv transformer, h) 20 mm copper bush rod assembly for 33/11 kv, 10 mva power transformer with oil seal, i) 12 mm copper bush rod assembly for 33/11 kv, 6.3 mva power transformer with oil seal, j) silica gel, k) oil seal for 33/11 kv power transformer, l) adaptor for bush rod extension for 33/11 kv power transformers, relays a) numerical relay (24-50 v) 3 o/c and 1 e/f relay of different make .(scada compatible), b) numerical relay (24-50 v) 3 o/c and 1 e/f relay of different make.(non-scada compatible), c) master trip relay 24-50 v ,of different make, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification a) 33 kv pin insulator with pins (porcelain type), b) 33kv pin insulators for panther conductor with pins (polymer type), c) 33kv pin insulators for wolf conductor with pins (polymer type), d) 33kv pin insulators for dog conductor with pins (polymer type), e) 33 kv g.i. pins, f) 11 kv pin insulator (polymer type) with pins, g) 11 kv pin insulator (porcelain type) with pins, h) 11 kv g.i. pins, i) 11 kv disc insulator (b & s type) 70 kn (porcelain type), i) 11 kv disc insulator (b & s type) 120 kn (porcelain type), j) 33kv disc insulators (polymer type), k) 33 kv post insulator, l) 22 kv post insulator, m) 11 kv post insulator, n) drive insulator of sorts, o) shackle insulator, p) 11 kv guy insulator, q) 33 kv guy insulator, 33 kv tension fittings for acsr dog conductor, b&s 3 u-bolts type, 33 kv tension fittings for acsr wolf conductor, b&s 4 u-bolts type, 33 kv tension fittings for acsr panther conductor, b&s

State Government

CTN :45267006

30 May, 2026 NA

Jamnagar - Gujarat

Tender For supply of silica gel indicating type (blue) for ht / lt bus duct, power and service transformers breather as moisture absorbent at stps

Central Government/Public Sector

CTN :45199256

27 May, 2026 NA

Dahod - Gujarat

Tender For supply of breaking excitation transformer (atfex) 60 kv a . as per clw specn. no clw/es/t-20/h. [ warranty period: 30 months after the date of delivery ] ]

Transformer Breather Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector