Get complete information related to latest Transistor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Transistor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Transistor Tenders.
Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f
Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g
Tender For rfp for selection of an agency for providing on-site comprehensive annual maintenance contract services for ict equipment supplied under the coding and robotics education in schools (cares) scheme in the state of goa on an as is, where is basis - single board computing device (technical specifications: intel x64 processor 64-bit j4105 upto 1.5 ghz, 4mb cache with intel integrated graphics 600memory: 8gb ddr4 2666 mhz ramstorage: 64gb m.2 ssd,connectivity : realtek dual band (ax card) ac 1200 with bluetooth 5.1 mini pciex card, realtek 1 gbps ethernet porti/o: hdmi (upto 4k @ 100hz), 2 x usb 3.0 ports, 4 x usb 2.0 ports, vga port, combo audio jack,100 keys or higher usb keyboard,keyboard type: standard keyboard,lcd monitor:screen size: 19 inch,video conferencing camera,headphone with mic)(1st year cost), single board computing device (technical specifications: intel x64 processor 64-bit j4105 upto 1.5 ghz, 4mb cache with intel integrated graphics 600memory: 8gb ddr4 2666 mhz ramstorage: 64gb m.2 ssd,connectivity : realtek dual band (ax card) ac 1200 with bluetooth 5.1 mini pciex card, realtek 1 gbps ethernet porti/o: hdmi (upto 4k @ 100hz), 2 x usb 3.0 ports, 4 x usb 2.0 ports, vga port, combo audio jack,100 keys or higher usb keyboard,keyboard type: standard keyboard,lcd monitor:screen size: 19 inch,video conferencing camera,headphone with mic)( 2nd year cost), single board computing device (technical specifications: intel x64 processor 64-bit j4105 upto 1.5 ghz, 4mb cache with intel integrated graphics 600memory: 8gb ddr4 2666 mhz ramstorage: 64gb m.2 ssd,connectivity : realtek dual band (ax card) ac 1200 with bluetooth 5.1 mini pciex card, realtek 1 gbps ethernet porti/o: hdmi (upto 4k @ 100hz), 2 x usb 3.0 ports, 4 x usb 2.0 ports, vga port, combo audio jack,100 keys or higher usb keyboard,keyboard type: standard keyboard,lcd monitor:screen size: 19 inch,video conferencing camera,headphone with mic)( 3rd year cost), wifi based router (standard: ieee802.11/a/b/g/n/ac,interface: wan gigabit port, minimum 4 lan gigabit ports.antenna: minimum 4 external omni directional antennas.,data rate: upto 867 mbps (ac 1200),power adapter: ac input: 100-240 v 50hz to dc adapter)(1st year cost), wifi based router (standard: ieee802.11/a/b/g/n/ac,interface: wan gigabit port, minimum 4 lan gigabit ports.antenna: minimum 4 external omni directional antennas.,data rate: upto 867 mbps (ac 1200),power adapter: ac input: 100-240 v 50hz to dc adapter)(2nd year cost), wifi based router (standard: ieee802.11/a/b/g/n/ac,interface: wan gigabit port, minimum 4 lan gigabit ports.antenna: minimum 4 external omni directional antennas.,data rate: upto 867 mbps (ac 1200),power adapter: ac input: 100-240 v 50hz to dc adapter)(3rd year cost)
Tender For supply of igbt (insulated gate bipolar transistor) is a three-terminal semiconductor device (gate,collector, emitter) that combines the high-speed switching of a mosfet with the low saturation voltage of abipolar junction transistor (bjt). specifications: (1) model no:ff1400r17ip4 (2) voltage : 1700 v (3) current :1400 a (4) repetitive peak collector current : 2800 a (5) collector-emitter saturation voltage : 1.75 v to 2.2v @ 1400a, 15v (6) gate-emitter peak voltage :20 v (7) module type: half-bridge (dual switch). (8) operating temperature: -40 to 150 ?c. (9) internal gate resistor: 1.6 ohm. (10) series/package: prime pac 3.make: infineon, mitsubishi, semikron, abb. [ warranty period: 12 months after the date of delivery ]
Tender For supply of infrared thermometer with video recording and data logging similar to metravi vit-20. specification attahced as annexure a. make/brand : metravi brand model : vit-20 or equivalent or similar reputed make [ warranty period: 30 months after the date of delivery ] ]
Tender For bid to ras supply of q switch assembly , power supply board , ic uc 3842 , k 2545 transistor , bridge rectifier , f 10 lc40 2733 , zener diode 3v , cap 400v 100uf