Latest transit mixer scrap Tenders | Government transit mixer scrap Tenders

CTN :41037856

22 Jul, 2025 7.68 Crore

Jhajha - Bihar

Tender For mgsy/25-26/jhajha/01 - construction of rcc hl bridge on kiyajori se maharaidih, foundation, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap.ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 30 in pile foundation complete as per dwg & tech specification.pile cap in rcc m-30, bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m.ii. 1200 mm dia, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.00 for each island.), providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total) ., substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specificationi) upto 5m height (using concrete mixer), ii) from 5m upto 10m height (using concrete mixer), r.c.c. grade m-35 in substructure complete as per dwg & tech specificationii) from 5m upto 10m height (using concrete mixer), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5ii. rcc m-30, supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical specification clauses 1002, 1010 & 1202, providing and laying cement con

CTN :41037837

22 Jul, 2025 15.13 Crore

Bhabhua - Bihar

Tender For mgsy/25-26/bhabhua/01 - name of work: construction of proposed hl rcc bridge on durgawati river at swar gadh of rampur block in the dist-kaimur(bhabhua), length- 111.60mfoundationexcavation for structuresearthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap.ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 35 in pile foundation complete as per dwg & tech specification.pile cap in rcc m-35 (using batching plant, transit mixer and concrete pump), bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m.ii. 1200 mm dia (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.00 for each island.), carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of loada) initial load test on test pile for 2.5 times the design load specified in drawings1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total) ., substructurer.c.c. grade m-30 in substructure complete as per dwg & tech specificationrcc m-30 (using batching plant, transit mixer and concrete pump)i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructureproviding and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5ii. rcc m-30 (using batching plant, transit mixer and concrete pump), supplying, fitting and p

CTN :41037847

22 Jul, 2025 12.35 Crore

Begusarai - Bihar

Tender For mgsy/25-26/begusarai/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in between mathar kasimpur kurmi tola road and gupta lakhminiya rcd road under matihani block in the district of begusarai ., excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. co

CTN :41037852

22 Jul, 2025 13.59 Crore

Araria - Bihar

Tender For mgsy/25-26/araria/02 - construction of rcc h.l. bridge in pagal chauk se kesa tola chainage 2.200 km par pul nirman karya, h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i. ordinary soil, i) upto 3m depth, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth, providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification, well curb(iv) rcc m-35 gradecase-i : with batching plant, transit mixer and concrete pump, well steining(vii) rcc m-30 gradecase-i : with batching plant and concrete pump, bottom plug(i) pcc grade m-20case-i : with batching plant and concrete pump, top plug(ii) pcc grade m-20case-i : with batching plant and concrete pump, well cap(ii) rcc grade m-30case-i : with batching plant, transit mixer and concrete pump, sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 20% of cost for kentledge including supports, loading arrangement and labour., sinking of 7 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 7.5% for every additional meter depth of sinking over the rate of sinking for the previous meter, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, rcc m-30, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, rcc m-35 (using batching plant, transit mixer and concrete pump), i) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the struct

CTN :41037845

22 Jul, 2025 13.50 Crore

Araria - Bihar

Tender For mgsy/25-26/araria/01 - panchayat pipra vijayavar nuna nadi me high level rcc pul ka nirman karya, h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i) upto 3m depth, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth, providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification, well curb(iv) rcc m-35 gradecase-i : with batching plant, transit mixer and concrete pump, well steining(vii) rcc m-30 gradecase-i : with batching plant and concrete pump, bottom plug(i) pcc grade m-20case-i : with batching plant and concrete pump, top plug(ii) pcc grade m-20case-i : with batching plant and concrete pump, well cap(ii) rcc grade m-30case-i : with batching plant, transit mixer and concrete pump, sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 20% of cost for kentledge including supports, loading arrangement and labour., sinking of 7 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level., sandy soil, depth below bed level upto 3.0 m., beyond 3 m upto 10 m depth, beyond 10 m upto 20 m, add 5% for every additional meter depth of sinking over the rate of sinking for the previous meter, beyond 20 m upto 30 m, add 7.5% for every additional meter depth of sinking over the rate of sinking for the previous meter, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, i) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709

CTN :41037844

22 Jul, 2025 13.03 Crore

Patna - Bihar

Tender For mgsy/25-26/balia/01 - construction of h.l rcc bridge ( 8 x 21.750 m) in between t01 se sonwarsha path under shamho akha kurha block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed ceme

CTN :41024760

17 Jul, 2025 5.87 Lacs

Holalkere - Karnataka

Tender For supply of materials toconstruction of stone revetment on the north and south sides of muddekatte in thuppadahalli village in thuppadahalli gp holalkere taluk - name bord_ai, mason class ii_ai, sundries charges 1% on materials_ai, watering charges 1% on material_ai, mixer (concrete) 1 cum capacity_ai, portland cement_ai, coarsed sand_ai, broken stone aggreagate 12mm to 10mm_ai, broken stone aggreagate 20mm_ai, filter media stone aggregates_ai, vibratory roller 8 tonne_ai, water tanker_ai, motor grader 3.35 meter blade_ai, wheeled dozer (d50 beml)_ai, laboratory asst.(sslc passed)/mate/supervisor_ai, gravel 2.36mm_ai, water_ai

CTN :41054539

04 Aug, 2025 NA

Amritsar - Punjab

Tender For construction of tetra hedron - cement oblique opc 43 grade in poly bags of 50 kg each conforming to is 8112 make acc oblique ambuja oblique india cement oblique birla oblique ultra tech , fine aggregate sand coarse best quality conforming to is 383 , coarse aggragate 20mm best quality conforming to is 383 , admixture 2.50ltr oblique cum make fosroc oblique sika oblique stp , mild steel tmt bars 12 mm dia as per relevent is 1786 2008 , mild steel tmt bars 20 mm dia as per relevent is 1786 2008 , mild steel binding wire 0.90 mm dia conforming to is 280 , primer , synthetic enamel paint camouflage pattern , diesel for concrete mixer , petrol per running of needle vibrator , painting rolling brush 12 inch isi marked , waterproof wooden ply board 2400mm x1200mm x12mm thk conforming to is 1328-1996 make supremegreen ply oblique kit ply , 2nd class soft wood plain fillets comma square or rectangular in section exc 06sqcm and exc 13sqcm clean sawn , ms nails of size 1 inch confirming to is 2366 1986 , ms nails of size 2 inch confirming to is 2366 1986 , ms nails of size 3 inch confirming to is 2366 1986 , multipurpose heavy duty gumboots of required sixe best quality , multipurpose heavy duty latest rubber hand gloves of required size and aproved make isi marked , showel square nose 14 gauge blade size 310 x 245 mm comma shaft size 710 mm fitted with strong steel crutched wooden handles , hammer earth with handle minimum weight 5 kg without handle , galvanised iron pan mortar tasla comma 18 gauge comma 16 inch dia minimum weight 01 kg , hand wood saw 18 inch , hack saw blades both sides make taparia oblique tata oblique hira , industrial safety helmet conforming to is 2925 of approved colour comma make taparia comma tata comma hira , plaster trowel with wooden handle isi marked , plumb bob iron best quality , stainless steel buckets 20 ltrs capacity comma guage of steel used in bucket to be minimum 18 gauge , needle vibrator comma capacity not less than 2 hp comma 220v singl phase oblique three phase , pipe cutter wheel dia 350 mm comma load speed 3800 rpm comma input power 2400 w comma net weight 15 point 800 kgs , pipe cutter blade14 inch dia suitable for electric heavy duty iron cutting machine , portable welding machine copper heavy duty portable comma air cooled 2 phase 230 oblique 440 volt comma load capacity 5 kw , welding rod no 10 comma 90 rod each pkt of make surya or equivalent with isi mark , protection gear for welding command one set of protection gear , pvc aluminum cable seathed 2 core x 10 sqmm 240 volt and 92 mtr each roll comma make plaza comma philips oblique v gard oblique equivalent , measuring tape 5 mtr best quality best quality isi marked , add amount for skilled labour

CTN :41059544

28 Jul, 2025 20.00 Lacs

Sagar - Madhya Pradesh

Tender For construction material supply work for financial year 2025-26 - construction material supply work for financial year 2025-26, cement opc 43 grade bag, cement ppc bag, hysd steel bar 415 grade rod -all size, hysd steel 500 rod -all size, open bhatta brick, fly ash brick, chimney brick, narmada sand, stone aggragate 6 mm, stone aggragate 12.50mm, stone aggragate 20mm, stone aggragate 40mm, metal 45mm to 63mm, metal 63mm to 90mm, stone dust, stone dust with spreading roller compaction, hard moorum, hard moorum with spreading withcompaction, red sand stone slab 40mm thick, local flag stone 40mm, local flag stone 75mm, kota stone 25mm thick, kota stone 20mm thick, steel sheet centering & shuttering, ply wood 20mm centering & shuttering, soil pipe 100mm dia 6 kg pressure, soil pipe 150mm dia 6kg pressure, soil pipe 200mm dia 6kg pressure, soil pipe 250mm dia 6kg pressure, rcc hume pipe np2 150mm dia, rcc hume pipe np2 200mm dia, rcc hume pipe np2 300mm dia, rcc hume pipe np2 450mm dia, rcc hume pipe np2 600mm dia, rcc hume pipe np2 1000mm dia, r.c.c hume pipe np3 150mm dia, r.c.c hume pipe np3 200mm dia, r.c.c hume pipe np3 300mm dia, r.c.c hume pipe np3 450mm dia, r.c.c hume pipe np3 600mm dia, r.c.c hume pipe np3 1000mm dia, rcc hume pipe np4 150mm dia, rcc hume pipe np4 200mm dia, rcc hume pipe np4 300mm dia, rcc hume pipe np4 450mm dia, rcc hume pipe np4 600mm dia, rcc hume pipe np4 1000mm dia, rcc collar, cpvc pipe 6 kg 15mm dia, cpvc pipe 6 kg 20mm dia, cpvc pipe 6 kg 25mm dia, pvc pipe 6 kg 65mm dia, pvc pipe 6 kg 90mm dia, pvc pipe 6 kg 110mm dia, pvc pipe 6 kg 150mm dia, cement jali, lime stone, oil brand distemper, enamel paint, acrylic emulsion paint, oil paint, tarpeen oil, kuchi brush, paint brush 80mm, paint brush 100mm, paint brush 125mm, paint brush 150mm, scrubber 8mm to 12 mm, binding wire m.s., fencing wire gi barbed wire, fencing jali bended mess gi, chain link jali gi, m.s. single section, ms section welding completed, ms door window & frames, welded tabular pipe section, gi roofing profile sheet 0.63mm isi mark, g i plain sheet 0.63mm, wc sheet 580 mm indian type, wc sheet europian type, urinal pot long, urinal pot corner, sink, wash basin, glazed tile, vitrified tiles, flush door 1st class 40mm, rcc electrical pole 9m, concrete mixer machine with diesel complete, concrete mixer machine with lift with dieselcomplete, plate vibrator with diesel, niddle vibrator with diesel, rassi joot, water tank hdpe, marble tile 12mm thick, marble tile 25mm thick, granite stone 25mm, cpvc water supply fitting 15 mm, cpvc water supply fitting 20 mm, cpvc water supply fitting 25 mm, pvc bid cock, brass bid cock, jcb machine with diesel driver on rent, lnt poclain machine with diesel draiver onrent, tractor trolly with diesel on rent, generator with diesel on rent, putty, rubber moulded paver block m30 (60 mmthick), cement paver block m30 (100 mm thick), stainless steel 202 grade section welding &polishing complete, stainless steel 304 grade section welding &polishing complete, gi rolling shutter 1.0 mm thick, ball bearing for shutter, cylinderical roller with diesel, vibratory roller with diesel, rcc tree guard name plate with colour, steel tree guard complete name plate withcolour weight - 15 kg, boulder stone 20x20x20 cm, boulder stone 15x15x20 cm, black cotton soil, mason, labour, rcc flower pot rectangle with colour 50 litre, water tanker with diesel, handpump platform with completed work as per phe manual standard design, false celling, acp sheet partition, acp sheet decoration, wooden partition, wooden furniture work, wc seat reparing and installion complete, steel channel

CTN :41024712

25 Jul, 2025 6.41 Lacs

Multi City - Karnataka

Tender For for the procurement of school compound work cuntsruction of various materials gp uppanasi - display board / cib_1upi, lumpsum material_1upi, painter class i_1upi, add brush, putty, sand paper at 2 percentage on cost of paint_1upi, water proofing cement paint_1upi, add providing and removing scaffolding at 3 percentage on labour_1upi, add handling , loading and unloading at 1 percentageon material_1upi, casurina poles 100 to 150 mm_1upi, brick_1upi, add formwork at 4 percentage out of material and labour_1upi, mason class i (with tools)_1upi, broken granite metal 10 mm_1upi, granite metal 20 mm_1upi, granite metal 40 mm_1upi, mixer (concrete small used in culvert)_1upi, bond stone 20 x 20 x 45 cm_1upi, rubble stones_1upi, add watering charges at 1 percentage on material_1upi, mixer (concrete) 1 cum capacity_1upi, portland cement_1upi, coarse sand (zone iii)_1upi, broken stone aggregate 12 mm to 10 mm size_1upi, broken stone aggregate 20 mm size_1upi, broken stone aggregate 40 mm size_1upi

Transit Mixer Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors