Latest transmission belt Tenders | Government transmission belt Tenders

State Government

CTN :45675981

02 Jul, 2026 25.11 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to b, c & d type quarters at jeevanbhimangara, bengaluru from august 2026 to july-2027. (reserved for sc)- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150mm dia upto 300mm , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 90mm dia., 6 kg/sqcm & class 3 , item description: constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensi

Central Government/Public Sector

CTN :45666272

04 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of upper flushing nozzle e41241943901 , lower flushing nozzle awt e41241402800 , power feed contact di lee e50300000055 , upper wire guide 0.25 dia m132c255 , wire guide lower 0.25mm m133j255 , work tank e w bunch flat type , ss bearing f608 2rs ezo make , timing belt 339 3m 15 htd powergrip , timing belt 339 3m 9 , flat transmission belt f 00 15 0.82 mtr , gear non metallic e41212353632 , thermax make maxclean 05 , resin e61030100025

CTN :45565907

23 Jun, 2026 NA

Vapi - Gujarat

Tender For supplying of materials and supplying and spreading of materials at various places of vapi municipal area. annual rate 2026-2027 - supplying of yellow earth, garden soil at site as directed., supplying of hard murram at site as directed., supplying of coarse clean sharp sand at site as directed., supplying of crushed stone aggregates, chippings etc. of disintegrated pieces, eletatrious and organic matter (for bitumen surface dressing etc.) and grading as per i.r.c.code., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii) 40 mm to 90 mm size metal, (iv)9 thick rubble, supplying bricks., supplying of granular sub base by providing coarse graded material, mixing by mix in place method with rotavator at omc, with grading material of 53 mm to 26.5 mm size @35 percent,26.5mm to 4.75 mm @ 45 percent and 2.36mm below @ 20 percent at site as directed., providing wet mix base course maximum 200 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, including cost of materials labour plant and equipment etc complete, construction of granular sub-base by providing coarse graded material(metal), spreading in uniform layer on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, etc, complete as directed by engineer in charge., providing and laying wet mix base course maximum 150 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, spreading into grade and camber with mechanical paver and consolidation with vibratory road roller including cost of material labour plant and equipment etc complete as directed by engineer in charge., supplying and spreading of following materials at site as directed by engineer in charge including rolling and consolidation with vibratory roller as directed by enigineer in charge., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii)40 mm to 90 mm size metal, (iv)9 thick rubble, supplying and spreading hard murram including rolling and consolidation with vibratory roller as directed by enigineer in charge., note:- all rate are required compulsory

Central Government/Public Sector

CTN :45283534

27 May, 2026 NA

Bokaro - Jharkhand

Tender For supply of v-belt,spc-8000 for coke crusher(3items) comprising of following: 1 - v-belt,spc-8000 for coke crusher #4(csp) , 2 - belt,c 295 , 3 - transmission belt;f/centrifuge;asp ,

Central Government/Public Sector

CTN :45151280

19 May, 2026 NA

Rourkela - Odisha

Tender For transmission belts for roll shop machine(14items) comprising of following: - v-belt,wedge,deg:xpb 3000,is-14261:1995 , - toothed belt,890-5m-25 , - toothed belt,565-5m-25 , - toothed belt,1280-8m-25,z=160 , - v-belt,cs,3v-800,is-2494/1994 , - belt,narrow v belt,5v-800 , - belt,narrow v belt,5v-950 , - belt,spc2600,22mm,18mm,pcd2600mm , - belt,spc3450,22mm,18mm,3450mm , - belt,d158,32mm,19mm,4080mm , - belt,e245,38mm,23mm,6400mm , - belt,spb1800,16mm,13mm,1800mm , - belt,d140,32mm,19mm,3631mm , - belt,e195,38mm,23mm,5025mm ,

Central Government And Public Sector

CTN :44185111

06 Apr, 2026 NA

Angul - Odisha

Tender For corrigendum : supply of v belt for roll grinder - material code -26608001110 - transmission belt5v1120 , material code -26608001170 - transmission belt8v2120 , material code -26608001180 transmission belt8v1700 , material code -26608001190 -transmission belt5v1800 , material code -26608009161 - belt z axis drive type isoran 360h 150 , material code -26608009231 - belt for y axis drive

corporations/Associations/Others

CTN :44475653

04 Apr, 2026 NA

Hyderabad-T - Telangana

Tender For supply of suction timing belt v 87.44.525.0 , suction timing belt v 87.44.524.0 , guide plate v 65.56.096.0 , disc spring ext.dia. 67,5 d 0.626.024 , shim ring 40x50x1 mm k 1.46.675 , support cartridge v 45.01.870.0 , disc spring v 45.89.012.0 , suction timing belt v 87.44.556.0 , suction timing belt v 87.44.557.0 , folding device l 581.03.6520.0 , folding device l 581.03.6521.0 , roller carriage l 581.00.7620.0 , disc spring ext.dia. 50.0 d 0.621.019 , linear guide k 1.388.10 , tightening shaft l 581.03.3003.0 , upper guide v 79.03.427.0 , plate cylinder l 581.00.2038.0 , abjustment spindle l 581.00.3518.1 , axial adjusting device l 581.00.3514.1 , bushing v 25.15.564.1 , clamping ring v 45.97.217.0 , helical spur gear r 2.20.060.477 , spur gear r 1.20.044.456 , needle bearing rna 4907 2rs k 1.315.87 , snap ring for bore d 55 mm k 1.45.055 , impression cyl outsideprint v45.41.043.0 , one way drive k1.960.99 , ink pump k 2.156.20 , diaphragm k 2.149.13 , eccentric bushing v 27.89.238.1 , duct roller v37.70.977.0 , retaining ring for shaft k 1.40.030 , toothed segment v 45.26.170.0 , ratchet wheel v 45.36.051.0 , supporting bushing v 27.17.628.0 , bushing v 27.45.920.0 , pneumatic cyl type av 50 10 k 2.410.03 , duct roller s 581.02.0064.0 , eccentric bushing v27.89.234.1 , eccentric bushing v27.89.235.1 , adhesive circulationpump l 581.00.8347.3 , diaphragm valve k 3.374.03 , roller carriage l 990.00.0405.3 , roller carriage l 990.00.0405.4 , disc spring v 45.89.023.0 , holding down device v 87.44.011.0 , longitudinal scoring knife v 03.00.039.0 , rubber roll 30 by 51w 135mm l581.00.2532.0 , cros scoring knive19.3x3,355v03.01.408.1 , counter roler cross scoring v45.83.034.0 , stock spring power k 2.963.02 , stepping motor k 6.692.56 , transport belt conveyor v 87.33.812.0 , curved gearcoupling k 1.941.36 , hmi of 191 splicer unit duly programmed , product separator l581.03.7500 , hebel lever part no v 55.07.163.0 , hebel lever part no s 581.03.0097.0 , transmission belt v 87.44.519.0 , transmission belt v.87.44.523.0 , transmission belt v.87.44.522.0 , disc spring v 45.89.025.0 , transport disc v 29.65.024.0 , stop v 67.70.290.0 , suction bar v 87.91.035.1 , clamping ring v 69.08.878.0 , counter pressure roller l380.00.0137.1 , upper knife v 03.02.566.0 , setting gauge v 45.29.523.0 , rubber roll l380.00.2537.0 , one way drive k 1.960.63 , flat belt thermo m15989 v 87.43.730.0 , lower knife part no v.03.02.163.1 , pulling roller v 37.61.279.0 , rubber roll 45 by 80 45mm l380.00.2556.1 , rubber roll 19by30 13mm n010.022 , transport roll v 25.05.934.0 , tube v 25.05.935.0 , segment roller v 29.80.688.0 , turning bar v 35.05.960.0

Transmission Belt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others