Latest transmission cylinder Tenders | Government transmission cylinder Tenders

Central Government/Public Sector

CTN :44785006

14 Apr, 2026 NA

Multi City - Karnataka

Tender For corrigendum : auction sale of rolling stock - condemned, surplus underaged serviceable wdm3a loco no.16876 (medha control system) as per annexure. qty as per ds8: 1 no./108.594 mt (approx). (1) sold on as is where is condition, available under the custody of sse/dsl/kjm, as declared vide ds-8 no. 230615 dtd 07.02.2026. (2) location: available at diesel loco shed kjm. temporarily stabled near control room/opp. pit wheel lathe. delivery will be given from shed. (3) delivery by number basis. (4) material- ferrous & non-ferrous composition as per annexure 5(a)/5(b) attached in photos. general condition of loco is as per annexure-5 attached in photos. purchasers should read published depot conditions and survey the material for quantity, location and road approach before bidding to the lot. after bidding no correspondence will be entertained. neighboring undeclared and nfs items shall not be disturbed. (5) hsd/lube oil if found to be either returned to railways or an amount equivalent to the cost as advised by sr.dee/trs/kjm, to be remitted to railways. (6) engine haulage charges for the movement of engines on private account is applicable with consultation with commercial & operating department as advised by sr.dcm/sbc & sr.dom/sbc and siding charges if any are to be paid by the purchaser in addition to the purchase cost of locomotive. the loco number and its ownership will be changed from railways to the name of the purchaser after sale by operating department in fois etc to enable the movement of the loco in dead condition over ir system on request from the purchaser.(7) date of handing over of locomotive to the buyer shall be deemed as delivery date and the locomotive shall be deemed delivered to the buyer. if the buyer so desires, he can get the locomotive serviced and overhauled in railway workshop or diesel shed on payment basis. such repairs will be carried out only after the locomotive has been sold to the buyer i.e after balance sale value payment , sale proceeds have been received and locomotive has been handed over. the cost of such service/repair will be advised by sr.dee/trs/kjm. (8) bidders are allowed to pay balance sale value in instalments as applicable under uniform e-sale conditions and depot conditions i.e, 1 instalment for lots upto rs.5 lakhs and 2 instalments incase of lots exceeding rs.5 lakhs and upto rs.15 lakhs and 3 instalments incase of lots exceeding rs.15 lakhs. but delivery order will be issued only after realization of payment of final instalment. as per our depot condition para 18- delivery will be given on first come first serve basis. (9) prior to balance sale value payment purchaser is requested to coordinate with sr.dee/trs/kjm 9731666450 for the availability of custodian sse/dsl/kjm 9731666474/9731666459/9731666482.

Central Government/Public Sector

CTN :44778686

17 Apr, 2026 NA

Parganas - West Bengal

Tender For supply of door stopper , table drawer lock broken , steel drawer lock broken , window curtain sliding , table sunmica change , drawer lock , door hinge and handle , chair wobbling and repair , chair cover rexin , broken door hinge , almirah locker lock , file cabin channel and lock , round knob lock change , door lock , new lock drawer , cabinet locks change , drawer channel and lock , medium almirah lock , duplicate key of room req , chair wheel , cover rexin chair , medium size almirah lock , big size almirah lock , file cabinet lock system , channel cabinet , almirah medium lock , drawer lock and handle , door to be fixed and door handle , drawer lock change , lock change 04 rack cabinet , almirah welding and alignment , key showcase covered , drawer handle , door stopper and hinge , keyboard channel change , extension board wall fit , sliding and lock , table keyboard channel , door lock and closure , table woobling , new foot rest , cabinet door wooden , big table sunmica and channel , medium almirah lock and handle , big size almirah lock and handle , microwave repair , glass door lock change , big almirah lock and handle , glass door cabinet broken , steel drawer , new wooden drawer installation with 03 draw , main door lock change , channel and lock wooden panel fix , new keyboard rack installation , keyboard rack , drawer channel and lock fixed , black panel ply , new lock installation , cabinet and drawer lock , lock change , handle change , new door lock , plank repairing , drawer and cabin lock , drawer lock manual setting ) /bid number : gem/2026/b/7347675 * /dated: 07-04-2026 & & / bid document 1 / 53

corporations/Associations/Others

CTN :44770090

27 Apr, 2026 NA

Cuddalore - Tamil Nadu

Tender For providing of repair and overhauling service - tps-ii mill beater wheel hub reconditioning; thermal power plant; yes; service provider premises

CTN :44676313

09 Apr, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of set of engine gasket t3c b 928 81 170 , wiper arm pentograph type , bearing frt wheel , major repair kit , oil seal , cable craft 183 v tt 50 2700

CTN :44770071

13 Apr, 2026 NA

Netanar - Chhattisgarh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - refurbishment of defective hydraulic motor of sgp dewatering wheel of blast furnace nsl; as per tender; as per tender

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44770432

15 Apr, 2026 5.00 Lacs

Banswara - Rajasthan

Tender For नगर पालिका परतापुर गढी मे साफ सफाई हेतु टोलिया क्रय एवं व्हील बेरोज मरम्मत का कार्य - purchase of towels and repair of wheel barrows for cleanliness in municipality partapur garhi.

CTN :44762778

15 Apr, 2026 NA

Leh - Jammu And Kashmir

Tender For tender for supply of lv7/tata , 2064-5450-4902 , starter solenoid switch , lv7/tata , 2154-3020-0101 , assy pull cable , lv7/tata , 2157-5440-0114 , assy head lamp with halogen bulb lh , lv7/tata , 2573-2910-0160 , minor repair kit for m/cyl consisting of , lv7/tata , 2618-2910-0110 , minor rep kit for clutch m/cyl consistin , lv7/tata , 2618-4010-0102 , assy wheel nut , lv7/tata , 2641-7250-2301 , door glass lh , lv7/tata , 2654-7231-0120 , door lock front lh , lv7/tata , 2930-002878 , tank coolant vehicular , lv7/tata , 6212-010-0152 , halogen lamp 12v 60/55w , lv7/tata , 6212-3050-105 , fuse link 8 , lv7/tata , 6220-004451 , indicator light , lv7/tata , 2654-5450-4601 , electronic flasher kit , lv7/tata , 2154-4110-0112 , assy prop shaft complete (front) , lv7/tata , 274767102301 , wind shield glass(5.76 thk) e certified

CTN :44764141

15 Apr, 2026 NA

Ambala - Haryana

Tender For supply of cabin shocker , cover assy , brake shoe front , door lock lh , pilot bearing , km sensor , speedo cable , clutch booster repair kit , brake shoe lock , knuckle bearing , wheel bearing

Transmission Cylinder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others