Latest transmission tower foundation Tenders | Government transmission tower foundation Tenders

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45302756

06 Jun, 2026 NA

Khurda - Odisha

Tender For supply of surface dressing levelling and top soil spreading , modular interlocking paver rubberised walkway tiles on sand bed , hedge plantation including manure and initian care , lawn development with ready turf and soil conditioner , shrubs and seasonal flowering plants , large ornamental potted plants with frp ceramic planters , prefabricated modular foundation fountain base dia 14ft x 8ft height , prefabricated mural panel 8x14 ft on sms bolt fixed frame , naval themed decorative artefacts insignia , led accent wall washer lights for murals , decorative wall panelling laminated cladding , naval heritage display panes framed , partial detachable false celling panels , ambient and feature led lighting , indoor planters and decorative element , decorative pole light base plate mounted including cabling connectors switche and earthing , outdoor benches seating modules , waste bins utilities stand , directional and safety signage , maintenance and upkeep services

CTN :45148599

26 May, 2026 NA

West Kameng - Arunachal Pradesh

Tender For bid to ras supply of climbing wall for rock climbing training with total climbing surface area 600 sqftheight , ms frame structure frame work subsidiary frame work with anchors , raft foundation for climbing wall , painting for steel structure and panels with two coat of red primer , complete installation , climbing rope dynamic 9.8mm , seat harness universal size , screw carabiner jumbo , screw carabiner regular size , chalk powder , chalk bag , climbing holds movable , chain anchors , helmet

CTN :45274954

28 May, 2026 NA

Ranchi - Jharkhand

Tender For dismantling and removal of led screens along with all associated accessories, feeder pillars, wires, cables, and ms frame structures/pillars including foundation, as well as disconnection of electrical cables of the led screens as per applicable electrical norms."at morabadi ground, ranchi, jharkhand

Central Government/Public Sector

CTN :45139024

01 Jun, 2026 NA

Mysore - Karnataka

Tender For design, supply, foundation, installation, testing , commissioning training and proving out of hydraulic c frame press machine -100ton capacity along with warranty(warranty includes preventive maintenance schedule (pms) 8 quarters as per the format enclosed as per annexure b) as per the technical specification annexure a enclosed. [warranty period: 30 months after the date of delivery) [ warranty period: 30 months after the date of delivery ]

CTN :45252275

09 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of dewatering pump , dismentaling pumps , dismentaling starters , removal of piping , removal of frame , foundation frame , installation of frame , civil work for frame , piping material , installtion of piping , flow meter , pressure transmitter , pump and motor installtion , piping work , electrical work , inspection of pumps , commissioning of pump , electrical central control panel

CTN :45148799

23 May, 2026 1.09 Crore

Baramulla - Jammu And Kashmir

Tender For corrigendum : supply of mmg pd of size 2400x2400mm , hydrophobic poreblocking ingredients , soakage pit cover made of 1mm thick ms sheet , quick setting compound , manufactured sand , aggregate 20mm , aggregate 40mm , aggregate 63mm , pcc soild blocks , integral water proofing compound , mild steel tmt bars 12 mm dia , mild steel tmt bars 08 mm dia , ms binding wire , ply wood 2.00m x 0.30m and 12mm thick , ply wood 10 mm thick , ismb conforming to is 808 2021 , 5mm thick ms plate , 4 nos x 16mm dia, 100mm long foundation bolt , srt size 2000x613x180mm , hdpe sand bag of size 75x40 cm , synthetic enamel paint , pbs roll , 0.60mm thick ppgi sheets, size 810 x 3050mm long , 3.00 m long rectangular hollow section , 2.30m long rectangular hollow section , 150mm long ms angle , self taping screw 80mm , silicone gel sealant , bitumen for filling of expansion joint , hdpe sheet confirmin , prefabricated steel door size 600mm x450mm , prefabricated steel door size 900mm x1800mm , ms rack of size 1.22m x 0.61m x 1.65m , pre fab welded door lintel made out , pre fab welded window loop hole , ci grating of size 300 x 300 mm with frame , red oxide primer , oil bound distempe , polyurethane thinner , common burnt clay building bricks , chalk white , cement base paint , 18w led tube and fitting 4 ft , 09w led bulb , 9 w inverter bulb , pvc ceiling rose 2 3 terminal , pvc casing capping square box 4x4 , 6a one way single module flush type modular switch , 1 module concealed metal flush box , white cover plate with frame 1 module , 2 module concealed metal flush box , white cover plate with frame 2 module , cable pvc insulated 1.5 sqmm , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping , 25mm pvc casing capping l bend , pvc casing capping t 25mm , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , mcb double pole 230v ac , pressure sensitive self adhesive , 16a spn or dp main switches , mcb distribution boards in sheet metal enclosure 2 ways , brick trowe , drop forged high grade carbon steel brick , lightweight extruded aluminum alloy straight edge generally , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , metal hand rammers , heavy duty pickaxes , shovel square , single-piece hot forged , heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch , transparent flexible pvc water leveling tubes in 50 meter , cutting pliers , non metallic fiberglass measuring tape 15 mtr , heavy duty crow bar 5 feet , wooden flat gurmala , earthing electrode , gi pipe 100 mm dia med , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long , ms clamp 40x2mm with nut and bolt , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade 40mm dia 6 mtr long , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45261972

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap unserviceable diesel generator sets 500 kva, make-greaves engine no.33071260134, 3 phases, 50 htz, 415 v, 0.8 pf, year-1996 ac generator, make kirloskar, frame 4ab355/7. not fit for railway use the foundation of this diesel generator set is attched with cemented concrete.the diesel generator set has reached its end of codal life and approx 30 years old. the set is visually completed but damage in condition.two silencer pipes about 20 feet and 01 pannel set are attched with this diesel generator set.the visual weight of this diesel generator set is approx 5000 kgs. location - inside the covered shed godown inner side of sse-power house-mws-gkp scrap unserviceable diesel generator sets 30 kva, make-kirloskar oil engine ltd pune.engine no-04.1014-845 alternator no.8430aa-03. not fit for railway use the foundation of this diesel generator set is attched with cemented concrete.the diesel generator set has reached its end of codal life and approx 36 years old. the set is visually completed but damage in condition.one silencer pipe about 10 feet and 01 pannel set are attched with this diesel generator set.the visual weight of this diesel generator set is approx 1000 kgs. location - inside the covered shed godown right side of entrance of sse-power house-mws-gkp remarks- 1- both diesel generator sets will be sold ¿as is where is¿ basis and delivery will be in numbers only 2-cutting and hammering will be allowed to facilate the loading. 3-if any damage is cause to railway during cutting and hammering it will be compensated by the railway from buyer. 4-small iron slab of about 02 feet each are place around the cemented concrete foundation of 500 kva diesel generator set which will not be a part of said lot. 5-sse-ph-mws-gkp will be the custodian of this diesel generator sets and no change lbpl, dbn, gst-18%, tcs -1% , hsn code-840810 allocation-20714208

CTN :45112938

26 May, 2026 NA

Barmer - Rajasthan

Tender For corrigendum : supply of electrical works tt parking pachpadra d d - sitc of main lt panel , s,f,i ms steel , sup 3.5cx400sq.mm a2xfy , sup 3.5cx35sq.mm a2xfy , sup 3.5cx25sq.mm a2xfy , sup 4cx16sq.mm a2xfy , sup 6cx2.5sq.mm ywy_cu_ , sup 3cx4sq.mm ywy_cu_ , sup 3cx2.5sq.mm ywy_cu_ , lay 3.5cx400sq.mm a2xfy , lay 3.5cx35sq.mm a2xfy , lay 3.5cx25sq. mm a2xfy , lay 4cx16sq.mm a2xfy , lay 6cx2.5sq.mm ywy_cu_ , lay 3cx4sq.mm ywy , lay 3cx2.5sq.mm ywy_cu_ , nflp end termination 3.5cx400sq.mm a2xfy , nflp end termination 16sq.mm cable , nflp end termination 3.5cx35sq.mm a2xfy , nflp end termination 3.5cx25sq.mm a2xfy , nflp end termination 4cx16sq.mm a2xfy , nflp end termination 4cx4sq.mm ywy , cable jointing kit for 3.5cx400sq.mm , s,i,t,c of earthpits , sitc 50x6mm gi strip , sitc 25x3mm gi strip , sitc 4sq.mm cu flex wire with crimped cu lugs. , trench 500 mm wide , trench 450 mm wide , excavation , reinforcement steel , sup and lay pcc 1_2_4 , sup and lay m25 rcc , supply and fix shuttering , supply and construct brick masonry works , supply and lay fine river sand , supply and laying bricks , 500 mm np3 with wall thickness 75 mm. , 450 mm np3 with wall thickness 70 mm. , 250 mm np3 with wall thickness 35 mm. , sitc 30 mtr. high mast tower , sandi foundation bolt _oem make only_ , civil foundation for high mast , sitc flp type feeder pillar , sitc 500 w led floodlight luminaire , supply double dome aviation lamp , illumination measurement and submit report , sitc db-ammenity building , sitc db-security cabins , first aid kit , shock treatment board , caution board lt 440 1000 volt , rubber mats , s and f 5 bucket with sand with frame , s and f 2inch radium stickers. , sitc route markers , dismantling, shifting, installation and commissioning of existing high mast ) /bid number : gem/2026/b/7488330 * /dated: 07-05-2026 & & / bid document 1 / 43

CTN :45246869

29 May, 2026 12.44 Lacs

Bardhaman - West Bengal

Tender For fabrication and changing of foundation bolt of the base frame head gear structure of pit no.-03 ,j.k. nagar(r ) colliery,satgram-sripur area

Transmission Tower Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector