Latest transmission tower repair Tenders | Government transmission tower repair Tenders

State Government

CTN :41095053

22 Jul, 2025 22.85 Lacs

Delhi - Delhi

Tender For sh-annual comprehensive maintenance of 8 passenger schindler make lifts at 216 hig(ms) near tv tower complex pitampura.

State Government

CTN :40950747

28 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25

CTN :41025838

19 Jul, 2025 NA

Kargil - Jammu And Kashmir

Tender For bid to ras supply of grinding blade , ss tower bolt , ss tower bolt 300mm , kero heater wicks , pbs rolls 0 point 91 mtr x 20 mtr , flexible pipe 120mtr , hinges 4 inch , window glass fiber ticknish 1130x390x4mm , window glass fiber 1160 x 440 mm , window glass fiber 290 x 270 mm , window glass fiber 1030 x 400 mm , window glass fiber 500 x 400 mm , window glass fiber 2200 x 1200 mm , mcb box 6 way , tube light 9 watt , 1 point 5 sqmm elect wire , 2 point 5 sqmm elect wire , 5 amp socket , mcb box 4 way , mcb box 2 way , mcb 32a sp , mcb 16a sp , bathroom door 1800 x 800 , chinese screw 1 inch , chinese screw 2 inch , flexible pipe , glass putty , door 2000mm x 1000mm , window wire mesh 810 x 1030 , wire mesh for door 2000mm x 1000mm , hinges , s trap , sokage pit cover 7000 x 3000 mm , safety tank cover 6100 x 2150 mm , tapping screw 2 inch , sand bag , wire mesh create 5x4 ft , long angle iron picket 6 ft long , short angle iron picket 2 ft long , ms plate 8x4x 3mm , roof sheet 10x3 point 5 ft , wall panel 10 ft long

CTN :41101040

07 Aug, 2025 NA

Panchkula - Haryana

Tender For supply of tower type ac of capacity 2 ton, 3 star rating, floor standing , split type ac of capacity 1.5 ton, 3 star rating , ss stand for inner unit suitable for 2 ton tower ac , ms stand for outdoor unit suitable for 1.5 ton ac , installation charge for 2 ton tower ac , installation charge for 1.5 ton tower ac , copper pipe heavy duty 5 by 8 inch and 3 by 8 inch with insulation , copper pipe heavy duty 1 by 2 inch and 3 by 4 inch with insulation , copper cable 4 core, 4sqmm, 100 volts grade , copper cable 3 core, 2.5sqmm, 1100 volts grade , refrigerator top up as per requirement , sub main wiring with 2x4 sqmm neutral and phase and 1x2.5 sqmm earth wire including suitable size conduit pipe and all necessary fitting , sub main wiring with 2x2.5 sqmm neutral and phase and 1x1.5 sqmm earth wire including suitable size conduit pipe and all necessary fitting , mcb spn 06-32 amps 230 volts 10ka , mcb box suitable for up to 32 amps spn mcb , drain pipe pvc of size 25mm dia , cutting chases pinning in stone concrete block or slab wall and making good to facing ) /bid number : gem/2025/b/6347515 * /dated: 16-07-2025 & & / bid document 1 / 19

CTN :41079396

30 Jul, 2025 5.42 Lacs

Chikkodi - Karnataka

Tender For supply of materials for const of kitchen shed for higher primary school nagaral village - polyenthylene water storage tank of specified capacity l naga03, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia naga03, unit cost as per the specification naga03, bib cock 20mm nominal bore naga03, corbon electrodes naga03, rms gusset plate naga03, ms pipes of 80 mm to 100 mm dia naga03, gi pipe 50 mm dia b class naga03, water proofing cement paint naga03, plastic emulsion paint naga03, dry distemper naga03, teak wood naga03, glass 5.50 mm thick plain glass naga03, chrominum plated screws naga03, cleat angles naga03, alluminium handles - 15 mm naga03, alluminium tower bolt - 20 cm naga03, pvc beading naga03, rubber beading for shutters beading naga03, nylon rollers naga03, powder coated 60-70 micron naga03, enamel metal paint naga03, ceramic tiles of size 30 x 30 cms naga03, ms flat naga03, m.s rods naga03, cudddapah slab 4 cm thick/shahabad/thandur blue naga03, vitrified tiles 600x600 mm naga03, burnt bricks class 35 (non modular) naga03, bond stone 20 x 20 x 45 cm naga03, stone at quarry naga03, binding wire naga03, tmt bars fe 500 naga03, plasticizer / super plasticizer naga03, portland cement naga03, coarse sand (zone iii) naga03, broken stone aggregate 12 mm to 10 mm size naga03, broken stone aggregate 20 mm size naga03, broken stone aggregate 40 mm size naga03

CTN :41091183

30 Jul, 2025 4.67 Lacs

Multi City - Karnataka

Tender For supply of materials for const of kitchen shed at nagyanwadi village naingalaj gp - liquid wood filler kdk1, water proofing cement paint kdk1, bib cock 20mm nominal bore kdk1, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia kdk1, polyenthylene water storage tank of specified capacity l kdk1, cudddapah slab 2.5 cms thick kdk1, granite sink 23cm thick kdk1, granite stone slabs fine dressed 40 mm thick kdk1, glass 5.50 mm thick plain glass kdk1, chrominum plated screws kdk1, cleat angles kdk1, alluminium handles - 15 mm kdk1, alluminium tower bolt - 20 cm kdk1, pvc beading kdk1, rubber beading for shutters beading kdk1, nylon rollers kdk1, aluminium window frame section 1.20 mm thick kdk1, enamel metal paint kdk1, ms flat kdk1, m.s rods kdk1, vitrified tiles 600x600 mm kdk1, unit cost as per the specification kdk1, brick kdk1, binding wire kdk1, tmt bars fe 500 kdk1, size stone 20 x 20 x 25 cms kdk1, bond stone 20 x 20 x 45 cm kdk1, rubble stones kdk1, plasticizer / super plasticizer kdk1, portland cement kdk1, coarse sand (zone iii) kdk1, broken stone aggregate 12 mm to 10 mm size kdk1, broken stone aggregate 20 mm size kdk1, broken stone aggregate 40 mm size kdk1

CTN :41090060

30 Jul, 2025 NA

Salem - Tamil Nadu

Tender For tgm&ca division - checking the tightness of sprayers (7582 nos.), cleaning the top surface of the fills, painting the corroded outer surface of ms secondary hot water distribution pipelines in natural draught cooling tower (ndct) by removing and re-laying the drift eliminators during unit capital overhauling/aoh 2025.

CTN :41075377

30 Jul, 2025 NA

Chandigarh - Chandigarh

Tender For supply of nail 25 mm , nail 50 mm , upvc pipes 110 mm , 6 mm ply board , anti-termite solution , sliding door bolts 200 mm , portland pozzolane cement , wood cutting blades 125 mm , door handles 200 mm , door spring , metal drill bit 9.8 mm , ceramic glazed wall tiles 20x30 cm , plain glass 4 mm 1828x1220 milimeter , steel butt hings 125 mm , ms wire mesh , plywood 19 mm thick 8 ft x4 ft , ms wood screw number 35x5mm , door stopper , tower bolts 150 mm , wooden beading patti 25 mm , stone aggregate bajri , flush door 35mm isi marked , turpentine oil 20 liter , systhetic enamel paint 4 liter each , washed sand , ceramic clay glass puttin , tapcrete 20 ltr , rehri , hammer drill

CTN :41025102

23 Jul, 2025 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of supply installation testing and commissioning of high mast tower at bpcl kanpur depot d d - supply and installation of high mast tower as per boq in atc document , supply and installation of high mast luminaire as per boq in atc document , supply and laying cable 3.5c x 35 sq mm as per boq in atc document , constructing gi earth pit as per boq in atc document , supply and laying earth strip as per boq in atc document , supply and laying perforated cable tray 100 mm as per boq in atc document , cable glanding and termination as per boq in atc document , earth excavation upto depth of 1.5 m as per boq in atc document , earth excavation for depth greater than 1.5 m and less than 3 m as per boq in atc document , pcc 1-2-4 as per boq in atc document , earth filling as per boq in atc document , rcc 1-1.5-3 upto plinth level as per boq in atc document , rcc 1-1.5-3 above plinth level as per boq in atc document , supply and laying reinforcement steel as per boq in atc document , supply and welding of ms structure as per boq in atc document

corporations/Associations/Others

CTN :41096540

30 Jul, 2025 NA

Salem - Tamil Nadu

Tender For tgmca division checking the tightness of sprayers 7582 nos cleaning the top surface of the fills painting the corroded outer surface of ms secondary hot water distribution pipelines in natural draught cooling tower ndct by removing and

Transmission Tower Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others