Tender For supply of spares of push button actuators and its accessories for switchgear ,control panels of 210 mw atps mppgcl chachai. - push button actuator with carrier & contact element – non illuminated (metallic series) : 22.5mm, mushroom head 40mm (press to lock, turn to release), colour – red, push button actuator with carrier & contact element – non illuminated (metallic series) : 22.5mm, mushroom head 40mm (key to release), colour – red, flush spring return push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – red, flush spring return push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – green, projecting push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – red, projecting push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – green, flush illuminated push button actuators with integral circuit led suitable operation at 240v ac ( metallic series) : 22.5mm, colour – red, flush illuminated push button actuators with integral circuit led suitable operation at 240v ac ( metallic series) : 22.5mm, colour – green , 2- position illuminated selector switch knob actuators suitable for operation at 240vac with series resistor : 22.5mm, 2- position non iilluminated selector switch knob actuators suitable for operation at 240vac with series resistor : 22.5mm, 2- position non illuminated selector switch key actuators suitable for operation at 240vac with series resistor : 22.5mm, contact element 1no suitable, accessories for push buttons, contact element 1nc suitable, accessories for push buttons, reset extended push button ( round type), accessories for push buttons, body/ carrier with mounting screw (passivaed) for making different assemblies, accessories for push buttons, metal adopter for 30mm hole to 22.5 mm, accessories for push buttons, enclosure/assembly with 01 mushroom (twist to release) + 01 flush actuator (on/off) with canopies, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (twist to release) + 01 flush actuator (on/off) with analog ammeter, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (key to release) + 01 flush actuator (on/off) with canopies, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (twist to release) actuator, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (key to release) actuator, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 02 flush actuator- red & green, material - die cast aluminium/ sheet metal/ stainless steel
Tender For supplying of materials for day to day electrical maintenance work for qtrs at sarojini nagar, sewanagar, delhi cantt.a.g.road kali bari p t colony under pesd-iii, ndgpo, new delhi.. -pvc insulated copper conductor, single core cable as required., g modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., supplying call bell/ buzzer suitable for single phase, 230 volts, complete as required, supplying following rating, 240/415 v, 10 ka, “c” curve, miniature circuit breaker/isolators suitable for inductive load of following poles etc. as required., suplying of 4 feet(approx) 20watt led poly carbonate tubular lamp with driver suitable for 230v, 50hz ac supply etc as reqd.(m/s havells/philips/wipro or ss make), supply, installation, testing and commissioning of ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. metal (aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/al body power factor not less than 0.9, service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is : 374-2019), thd (total harmonic distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac ceiling fan compliant to is 374:2019 fan supply, earthing etc. complete as req
Tender For supplying of materials for day to day electrical maintenance work for po bldgs under sspo south south-west division under pesd-iii, ndgpo, new delhi. - pvc insulated copper conductor, single core cable as required., g modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., supplying call bell/ buzzer suitable for single phase, 230 volts, complete as required, supplying following rating, 240/415 v, 10 ka, “c” curve, miniature circuit breaker/isolators suitable for inductive load of following poles etc. as required., suplying of 4 feet(approx) 20watt led poly carbonate tubular lamp with driver suitable for 230v, 50hz ac supply etc as reqd.(m/s havells/philips/wipro or ss make), supply, installation, testing and commissioning of ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. metal (aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/al body power factor not less than 0.9, service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is : 374-2019), thd (total harmonic distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac ceiling fan compliant to is 374:2019 fan supply, earthing etc. complete as req
Tender For provision of electrical item at the residence office of shri gaurav goyal, joint secretary, new delhi.subwork/packages:provision of electrical item at the residence office of shri gaurav goyal joint secretary, new delhi. - supplying , installation, testing and commissioning of air cooled hi wall split type air conditioners complete with indoor unit(idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant, wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. the system shall be able to deliver 100% of the rated capacity upto 42 0c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply : electrical cable is 694 or is 9968 temperature sensing control is/international electrotechnical commission (iec) 60730, hermetic compressor is 10617, heat exchanger is 11329, capacitor is 2993 and motor is 12615. complete as per cpwd specification and is : 1391 part ii 2023. the system shall be able to operate up to 50 0c (out door ambient temperature). inverter type - cooling only
Tender For supply of newfront hmi of p141 micom relay as per bid requirement mentioned in atc. , newfront hmi of p442 micom relay as per bid requirement mentioned in atc. , 3.6v, 1200mah half aa lithium battery as per bid requirement mentioned in atc. , hand reset and electrical reset, flag indicating 220v dc electromagnetic tripping and control relay as per bid requirement mentioned in atc. , self reset, flag indicating single element 220v dc operated electromagnetic tripping and control relay as per bid requirement mentioned in atc. , electrical reset, flag indicating single element 220v dc operated electromagnetic voltage selection relay as per bid requirement mentioned in atc. , self reset, flag indicating 220v dc operated electromagnetic trip circuit supervision relay as per bid requirement mentioned in atc. , self reset, reverse flag indicating single element 220v dc operated electromagnetic dc circuit supervision relay as per bid requirement mentioned in atc. , self reset, flag indicating single element 220v dc operated electromagnetic change over relay as per bid requirement mentioned in atc. , self reset, flag indicating 220v dc operated electromagnetic change over relay as per bid requirement mentioned in atc. , self reset, three element 220v dc operated electromagnetic change over relay as per bid requirement mentioned in atc. , hand reset, flag indicating 220v dc electromagnetic high speed tripping and control relay as per bid requirement mentioned in atc. , hand reset, flag indicating 220v dc operated electromagnetic auxiliary relay as per bid requirement mentioned in atc. , hand reset, flag indicating three element 220v dc operated electromagnetic auxiliary relay as per bid requirement mentioned in atc. , hand reset, flag indicating 220v dc electromagnetic master tripping and control relay as per bid requirement mentioned in atc. , self reset 220v dc operated electromagnetic trip circuit supervision relay as per bid requirement mentioned in atc. , hand reset, led indicating 220v dc operated electromagnetic auxiliary relay as per bid requirement mentioned in atc. supply, testing, packing, transit insurance, safe delivery and warranty of newfront hmi of p141 micom relay with model no.: p141316a6m0410j and make: m/s schneider electric., supply, testing, packing, transit insurance, safe delivery and warranty of newfront hmi of p442 micom relay with model no.: p442316b6m0400k and make: m/s schneider electric, supply, testing, packing, transit insurance, safe delivery and warranty of 3.6v, 1200mah aa lithium battery suitable for px4x micom relay front hmi application. preferable make m/s tadiran, supply, testing, packing, transit insurance, safe delivery and warranty of hand reset & electrical reset, flag indicating 220v dc electromagnetic tripping & control relay with 20 nos (16no+4nc) of contacts, case size-4 and flush mounting ge make, type:mvaj205-l and model: mvaj205la1004a in 86 a/b group trip application., supply, testing, packing, transit insurance, safe delivery and warranty of hand reset & electrical reset, flag indicating 220v dc electromagnetic tripping & control relay with 10 nos (8no+2nc) of contacts, case size-2 and flush mounting ge make, type:mvaj105-l and model: mvaj105ja1002a in 96 busbar protection trip application., supply, testing, packing, transit insurance, safe delivery and warranty of self reset, flag indicating single element 220v dc operated electromagnetic tripping & //bid details 2 / 28
Tender For supply of hrc cylindrical fuse 2 amps (without holder), 500v, 120ka, size: 10x38mm conforming to is:13703/iec/en-60269-1&2 used in secondary circuit of 100va control transformer lhb type ac & non ac coaches as per item no. 5and place of installation s1f151 to s1f156 from the bill of material of rdso spec no. rdso/pe/spec/ac/0184-2015. (rev-1) . accepted makes: eaton, siba, bussmann, eti, l&t, siemens, abb only. [ warranty period: 30 months after the date of delivery ] ]