Latest trash plate Tenders | Government trash plate Tenders

CTN :43208572

22 Dec, 2025 NA

Sahibganj - Jharkhand

Tender For e-quotations are invited for ascertaining rate of items for preparing estimate of construction of jsfc godown 1000 mt, udhwa. - design, supply, fabrication, transportation, and installation of truss-less self-supported arch roofing system over the specified warehouse structure. all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price.________________________________________1. site details: project type: warehouse roofing span (clear): 21.80 meters arch rise: 3.00 meters (span/5) length of shed: 46.50 meters no. of bays: 1 eave height: 5.60 meters (approx.)________________________________________2. roofing system requirements: type: truss-less (self-supported arch type) roofing system design: to be structurally stable without any intermediate truss or support, suitable for clear span of 21.80 meters and arch rise of 3.00 meters roof coverage area: approx. 1,013.7 sq.m (21.80 m 46.50 m)________________________________________3. material specifications: sheet material: color coated colorbond zincalume steel coating type: az150 (al-zn alloy coating, 150 g/m total on both sides) standard compliance: astm a 792 base metal thickness (bmt): 1.10 mm total coated thickness (tct): 1.075 mm width of coil: 912 mm to 1010 mm tolerance: 2 mm________________________________________4. additional requirements: installation: complete laying and fixing of roofing with overlaps and arching to specified dimensions using hydraulically operated mobile forming machinery. fasteners: high tensile, corrosion-resistant self-drilling screws with epdm washers to be used as per manufacturer recommendations. sealants/consumables: all sealants, fasteners, insulation pads, edge closures, etc., required to ensure weather-tight performance shall be included. workmanship: roofing system shall be free from dents, scratches, warping. finish should be smooth and uniform in color. drainage/gutters: (specify if required)________________________________________5. design & load considerations: wind load: as per is 875 part 3 (latest revision) live load & dead load: as per is 875 part 2 seismic consideration: as applicable per is 1893 deflection limits: as per is 800________________________________________6. quality control & inspection: all material to be accompanied by manufacturers test certificates. the roofing system shall be inspected and approved before and after installation by the engineer-in-charge.________________________________________7. warranty: minimum 10 years warranty on material for corrosion resistance and color stability., supplying & installation of single turbo ventilators 2300 cfm, size 24", aluminum construction with skylight of 2mm thick size 2 x 07 ft. - with complete fixing accessories, supplying & installation of hangers / clamps (for light hanging purpose).all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price., supply, installation, testing & commissioning of weighbridge. platform size 12.0 x 3.0 meter max. capacity 60 mt. type of platform fully welded modular type weighbridge main u-beam 300 mm x 140 mm - u beam (e 350 grade h t plate) cross support 16 mm thick plate between two main long beam top plate 8 mm top plate with anti-skid strips foundation frame 100 mm x 50 mm long frame with fully welded 350 mm x 350 mm x 16 mm plane plate border frame 100 mm x 50 mm - both side heavy duty frame with side wall mounting load cells ms plates 150 mm x 150 mm x 16 mm - load cell top & bottom plate joint & assembly main beam, cross support & top plate completely welded to each other. guide rail round pipe based side frame - 100 mm - both side fasteners as per required & is standard paint 2 coat of ant-corrosive primer and 2 coat enamel paint material all material will be is 2062 standard material list weighbridge platform structure- - 01 no. u-beam type modular orthotropic all material will be is 2062

CTN :43208575

22 Dec, 2025 NA

Sahibganj - Jharkhand

Tender For e-quotations are invited for ascertaining rate of items for preparing estimate of construction of jsfc godown 1000 mt, mandro - design, supply, fabrication, transportation, and installation of truss-less self-supported arch roofing system over the specified warehouse structure. all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price.________________________________________1. site details: project type: warehouse roofing span (clear): 21.80 meters arch rise: 3.00 meters (span/5) length of shed: 46.50 meters no. of bays: 1 eave height: 5.60 meters (approx.)________________________________________2. roofing system requirements: type: truss-less (self-supported arch type) roofing system design: to be structurally stable without any intermediate truss or support, suitable for clear span of 21.80 meters and arch rise of 3.00 meters roof coverage area: approx. 1,013.7 sq.m (21.80 m 46.50 m)________________________________________3. material specifications: sheet material: color coated colorbond zincalume steel coating type: az150 (al-zn alloy coating, 150 g/m total on both sides) standard compliance: astm a 792 base metal thickness (bmt): 1.10 mm total coated thickness (tct): 1.075 mm width of coil: 912 mm to 1010 mm tolerance: 2 mm________________________________________4. additional requirements: installation: complete laying and fixing of roofing with overlaps and arching to specified dimensions using hydraulically operated mobile forming machinery. fasteners: high tensile, corrosion-resistant self-drilling screws with epdm washers to be used as per manufacturer recommendations. sealants/consumables: all sealants, fasteners, insulation pads, edge closures, etc., required to ensure weather-tight performance shall be included. workmanship: roofing system shall be free from dents, scratches, warping. finish should be smooth and uniform in color. drainage/gutters: (specify if required)________________________________________5. design & load considerations: wind load: as per is 875 part 3 (latest revision) live load & dead load: as per is 875 part 2 seismic consideration: as applicable per is 1893 deflection limits: as per is 800________________________________________6. quality control & inspection: all material to be accompanied by manufacturers test certificates. the roofing system shall be inspected and approved before and after installation by the engineer-in-charge.________________________________________7. warranty: minimum 10 years warranty on material for corrosion resistance and color stability., supplying & installation of single turbo ventilators 2300 cfm, size 24", aluminum construction with skylight of 2mm thick size 2 x 07 ft. - with complete fixing accessories, supplying & installation of hangers / clamps (for light hanging purpose).all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price., supply, installation, testing & commissioning of weighbridge. platform size 12.0 x 3.0 meter max. capacity 60 mt. type of platform fully welded modular type weighbridge main u-beam 300 mm x 140 mm - u beam (e 350 grade h t plate) cross support 16 mm thick plate between two main long beam top plate 8 mm top plate with anti-skid strips foundation frame 100 mm x 50 mm long frame with fully welded 350 mm x 350 mm x 16 mm plane plate border frame 100 mm x 50 mm - both side heavy duty frame with side wall mounting load cells ms plates 150 mm x 150 mm x 16 mm - load cell top & bottom plate joint & assembly main beam, cross support & top plate completely welded to each other. guide rail round pipe based side frame - 100 mm - both side fasteners as per required & is standard paint 2 coat of ant-corrosive primer and 2 coat enamel paint material all material will be is 2062 standard material list weighbridge platform structure- - 01 no. u-beam type modular orthotropic all material will be is 2062

CTN :43252978

03 Jan, 2026 6.67 Lacs

Lucknow - Uttar Pradesh

Tender For supply of end plate gas kit model no tr 75 , intermediate plate gas kit model no tr 75 , end plate gas kit model no tr 52 , intermediate plate gas kit model no tr 52 , intermediate plate with gas kit model no pi 52 , end plate gas kit type m6 , intermediate plate gas kit type m6

CTN :43210065

25 Dec, 2025 NA

Dharmapuri - Tamil Nadu

Tender For purchase of cast steel trash plate/ssiva/engg/1055/2025/p1

CTN :43225477

07 Jan, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of bearing ball 6205 , gasket , screw , seal ring , link screw , contractor rating 16a/240v , lifting eye , friction pad with screws , solenoid valve coils , cap nut , lock ring , nut , bowl disc , ring height adjusting , block friction complete , shaft for worm wheel with conveyer pulley , washer for feed pump , pump housing , connecting housing , connecting housing , worm wheel , conveyor pulley , sleeve half , feed pump (8540 lph) , seal ring , o ring rub3034-71 dia6.3x38.7mm art64706drg260124 , seal ring (2390) , lifting tool , top disc , gravity disc 108.5 , nave , paring disc device , handle , 0-ring , flexible connection , switch , flexible connection , flow regulation , level switch , solinoid valve , screw buffer , cheese head screw , screw , screw , nut , pan tubular , seal ring , seal ring , o ring , spring , spring , lock washer , ring rubber large for separator bowl , field gasket , end plate ii , washer , buffer , bearing housing , deflector oil , protecting plate , ring wear , packing , pad friction complete for brake shoe , friction pad , bushing , valve cone , short shaft impeller for pump , pump housing , shaft of worm wheel , seal washer , worm wheel shaft , sleeve half coupling , feed and discharge pump , nut , flexible coupling complete , grease silicon (in 25 gram pack) , sleeve , impeller , impeller , impeller , impeller , impeller , bowl body , intermediate service kit (mopx 207) , major service kit (mopx 207) , pump service kit , major service kit (mab 103) , 3 years service kit (mopx 207) , set of tools , overhaul kit for pumping system , circuit breaker , circuit breaker , circuit breaker , plc standard kit , allen key 3 16 , packing , revolution counter , stud bolt , top bearing , ball bearing , seal ring , o ring for bushing , nut round km-5 , o ring rub3034-71dia6.3x124.7artno69270drg260124 , key woodruff , o ring , knob , set screw , seal ring , ball bearing , thermostat with thermowell range , clamping shoe , screw , holding bracket , spring washer , screw , guard , seat , worm , impeller , ring joint rulen gasket , lifting tool , sleeve half , lifting tool for sliding bowl bottom & pin spanner , bowl spindle , 4 relay output , 4 analogue input , 2 analogue input , delay relay , raw plate , field gasket

corporations/Associations/Others

CTN :43189279

29 Dec, 2025 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For procurement of spares for rotary twin lobe compressor in intermediate silos for pdfac system - procurement of spares for rotary twin lobe compressor in intermediate silos for pdfac system, pulley side plate, moc: c.i is 210, impeller with shaft, moc: c.i is 210, bearing housing (g.s), moc: c.i is 210, bearing housing (p.s), moc: c.i is 210, gear cover, moc: c.i is 210, bearing cover (de), moc: c.i is 210, bearing cover (nde), moc: std, helical gear, moc: en 353, bs : 970, thrust plate, moc: m.s is 2062, piston ring bush, moc: c.i is 210, key, moc: m.s is 2062, bearing puller disc, moc: en 19, bs - 970, piston ring, moc: en 19, bs - 970, oil securing disc, moc: c.i is 210

Central Government/Public Sector

CTN :43190529

25 Dec, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of injection ring a b for twin lobe blower model ur 1450 , thrust plate locking washer a side for twin lobe blower model ur 1450 , thrust plate locking washer b side for twin lobe blower model ur 1450 , bearing retainer a b for twin lobe blower model ur 1450 , piston ring id 87 mmx od 95 mm x thk 3 mm , piston ring retainer a b for twin lobe blower model ur 1450 , pressing bush a side for twin lobe blower model ur 1450 , pressing bush b side for twin lobe blower model ur 1450 , oil seal housing for twin lobe blower model ur 1450 , intermediate ring b side for twin lobe blower model ur 1450 , grob air filter for twin lobe blower model ur 1450 , oil seal bush for twin lobe blower model ur 1450 , o ring for twin lobe blower model ur 1450 , oil seal id 88 x od 110 mm x 13 mm for twin lobe blower model ur 1450

CTN :43202390

29 Dec, 2025 NA

Multi City - Tamil Nadu

Tender For procurement of spares for rotary twin lobe compressor in intermediate silos for pdfac system - pulley side plate, moc: c.i is 210, impeller with shaft, moc: c.i is 210, bearing housing (g.s), moc: c.i is 210, bearing housing (p.s), moc: c.i is 210, gear cover, moc: c.i is 210, bearing cover (de), moc: c.i is 210, bearing cover (nde), moc: std, helical gear, moc: en 353, bs: 970, thrust plate, moc: m.s is 2062, piston ring bush, moc: c.i is 210, key, moc: m.s is 2062, bearing puller disc, moc: en 19, bs - 970, piston ring, moc: en 19, bs - 970, oil securing disc, moc: c.i is 210

CTN :42901044

22 Dec, 2025 NA

Tarapur - Maharashtra

Tender For corrigendum : supply of spares for kirloslar pneumatic co ltd make reciprocating air compressor model 2ha 2qt - reciprocating air compressor bearing bush main part no. 35. 110. 120. 00 1. , bearing part no. 35. 110. 100. 00. , cylinder part no. 35. 180. 270. 00. , plate intermediate for 210d cylinder part no. 35. 336. 250. 00. , plate valve for 134crs31 32 suction deliveru valve part no. 36. 272. 520. 00. , spring helical conical for 134crs 31 suction valve part no. 36. 320. 240. 00. , spring helical conical for 134crs 32 delivery valve lt part no. 36. 320. 260. 00 , bell for mounting 134cr and 134crs suction valve part no. 36. 112. 120. 00. , grill protection for suction valve part no. 49. 141. 010. 00. , ring o 172dx6d for intercooler part no. 24. 541. 720. 00. , plate for r105 suction and delivery valve part no. 49. 239. 060. 00. , bell 85 height for delivery valve 210d and 230d part no. 35. 112. 300. 00 , s-a valve part no. 35. 050. 260. 00. , stud m 16 x 2 - 45 35 cylinder mtg. part no. 22. 229. 280. 00. , nut hex plain m16x2 cylinder mtg. part no. 22. 072. 270. 00. , nut m 12x1. 5 part no. 22. 072. 200. 00. , stud m 12x1. 5----27 18 part no. 22. 228. 560. 00. ) /bid number: gem/2025/b/6860157 * /dated: 24-11-2025 & & / bid document1 / 19