Latest travel motor Tenders | Government travel motor Tenders

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :45444262

13 Jun, 2026 64.9 Thousand

Dhanbad - Jharkhand

Tender For repairing of 02 nos. steel tube travel motor cover and damaged base and clamp and provide and fitting for tata 2060 hydraulic shovel machine at adic kusunda area

corporations/Associations/Others

CTN :45362178

05 Jun, 2026 4.16 Lacs

Rajahmundry - Andhra Pradesh

Tender For supply and delivery of physical and chemical parameters, lab chemicals at head water works of rajamahendravaram municipal corporation. - ???????a buffer solution 500 ml, ammonium purpurate (murexide) sq 5 gm, bromocresol green indicator 125ml, chemicals, cobaltous chloride hexahydrate purified 500gm, conductivity standard 1413 make: thermo scientific capacity: 480ml, dropping bottles 125ml, duracells batteries 1.5v, ec electrode, edta disodium salt er 500 gm, eriochrome black t 25gm, flocculator (jar test apparatus) for six stirrers (digital lcd based micro controller) make: savant technical specification: flocculator has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water and sewage. in provides identical test conditions for all samples. illumination base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through floc samples. flocculator consists of heavy-duty dc driven variable speed motor having speed from 20 to 180 rpm with built in speed control. stainless steel stirring rods are provided with adjustable spacers to adjust the depth of stirring paddies. the stirring shaft can be removed without disturbing other stirrers. this unit is supplied without beakers to work on 220 volts a.c., hydrachloric acid 35-38% (1.18) 500ml, isopropylalacohal 500ml, ph 10.01 buffer solution make: thermo scientific capacity: 480ml, ph 4.01 buffer solution make: thermo scientific capacity: 480ml, ph 7.00 buffer solution make: thermo scientific capacity: 480ml, ph electrode (rangs 0-14), phenolphthalein indicator solution 125 ml, potassium chloride 500grms, potassium chloroplatinate (iv) 5gm, potassium chromate er 500gm, reagents visocolor powder pillows iron photometric test part number: 936227 make: mn measuring range: iron 0.03-3.00 mg/l fe number of tests: 100, reagents visocolor powder pillows nitrate photometric test part number: 936226 make: mn measuring range nitrate - 5-220 mg/l no, number of tests: 100, s.no, silver nitrate er 500ml, sodium carbonate anhydrous er 500 gm, sodium hydroxide pellets 98% 500gm, stabilizer input voltage: 90 vac-290 vac make: reputed, standard test nanocolor chloride part number: 931218 make: mn measuring range chloride 0.2-125 mg/l ci number of tests: 250, standard test nanocolor fluoride part number: 931227 make: mn measuring range fluoride -0.05-2.00 mg/l f number of tests: 500, sulphuric acid er 500 ml, tissue rolls, titrimetric test kit visocolor eco total hardness make: mn, germany model: 931029 gradation: total hardness - 1 drop correspondes to 1.25 °e method: total hardness-complexometric titration no of test: 110 test(s), titrimetric test kit visocolor he alkalinity part number: 915007 make: mn measuring range alkalinity-0.2-7.2 mmol/l. oh (1 syringe filling) number of tests: 200, tube test nanocolor total nitrite part number: 936230 make: mn measuring range 0.01-0.30mg/l number of tests: 100

CTN :45363385

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 5 ) for civil department - purchase of equipment s, sand replacement test apparatus metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300mm with 100 mm hole). another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kitsseamless steel cylinder with no sharp edges. common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products) common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1 wall thickness ~3 mm (industrial products), core cutter aim 161 model core cutter: seamless steel tube (typically 100mm id, 130mm height, 3mm wall thickness). steel dolly: 25mm high, 100mm id, to prevent damage while driving. steel rammer: for driving the cutter. tools: spade, straight edge (knife), moisture containers. , slump cone apparatus 300mm ht, bottom dia 200mm,top dia 100mm with base plate andtamping rod material make : mild steel, jar test apparatus uniform stirring of up to 6 samples simultaneously. stirring rods should be adjusted individually during mixing digital display which should clearly indicate the speed of rotational variable speed 1-200rpm. heavy duty 1/20hp motor with gear train mounted on a mild steel housing. stainless steel stirring paddlers with adjustable height. paddles to be driven by electronically controller variable speed. locking collars or stirring rods permit adjustment height of paddle height. spacing of 6 (150mm) between stirring rods so as to permit use up to 1000ml beaker. the digital timer to be set to count down from 1 to 99 minutes. housing material: crc / ms sheet duly powder coated. power consumption : 220/230v ac supply 50hz single phase motor : 1/ 20hp motor good quality illumination : built in illuminator beaker : 6 nos 1000 ml beaker 1, compression testing machine 1000kn capacity capacity: 1000 kn type: hydraulic,floor-mounted accuracy: 1% of indicated load load application:smooth, uniform, controlled platens:hardened steel platens, suitable for concrete cubes/cylinders safety:overload protection, pressure relief valve, emergency stop, safety guard standards: is 516 / astm / iso compliant power supply: 415 v, 3-phase, 50 hz accessories: platens,spacers, pressure gauge, operating manual calibration: factory calibrated with certificate installation & training: included

CTN :45291537

05 Jun, 2026 2.99 Lacs

Darjeeling - West Bengal

Tender For tender for supply of repair maintenance and servicing of eot crane 2 ton - servicing and maintenance of cranes 02 ton an all allied works with load test. , bridge & cross traverse rail alignment by clamps fitting/ adjustment , replace repaire dsl or ip supply cable on long travel , replace current collector for smooth operation , hoisting motor 5.2kw , 3ph , sc servecing only , cross traverse motor 0.55kw , 3ph , sc servecing only , long travel motor 2.2kw , 3ph , sc servecing only , bridge wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , trolley crab wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , hoock block maintainance and replacement of defective part any of pullies , rope lock , pulley bearing , thurster bearing , cover fastners , replacement of hoist wire rope dia 12 6 nos 36 fibre core , hoist assembly maintenance and replacement of defective part any of coupling , brake shoes , bearing , spacer , shaft , gear. , equiliser pulley maintenance and replacement of defective part any of pulley , shaft , bearing , maintainance for span of the crane within limit , it must not wear wheels on either sides of flanges , maintainance for diagonals of crane within the limit , it must not wear flanges of lt wheels or must not get jam of lt motion , rubber buffers replacement , limit switch for any of motion long travel cross traverse hoisting ) , relay maintenance or replacement with accessories , cross traverse cable replacement , cross traverse cable trollies maintenance or replacement

CTN :45250661

15 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For supply of 50.8 mm travel motorized translation stages , 101.6 mm travel motorized translation stages

Central Government/Public Sector

CTN :45227697

03 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply, erection, testing and commissioning of cable drag e chain system in 5 ton ac eot crane holding capacity of main hoist motors 12.0 hp, long travel motor 9.0 hp cross travel motor 3.5 hp having span length of 14.5 meters with details of necessary copper cables and accessories enclosed separately. (note: existing old festo cable trolley system has to be removed and handover to railway) make: igus, tsubaki, kabelschlepp, mitool, contol well, silverline, cks, rs component & contro only. [ warranty period: 12 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45160212

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot miscellaneous scrap - 128001eot26k, pl- 98325061- 40000 kgs. scrap cond.u/s. eot 40 tones capacity, m&p no.1619.consisting of the details- 1) main hoist motor: 1 capacity-88 kw/118hp, qty- 01no. (2) auxiliary hoist motor- 23kw/30hp-01 no. (3) long travel motor 9kw/12hp-01 no. (4) cross travel motor 17.5 kw/23hp-01 no. (5) inching motor 9kw/12hp-01 no. total motor-05 nos, total copper content-140 kgs (approx). note: delivery by weighment basis. gas cutting permitted for the purpose of loading. note:1) custodian should make the premises clear to facilitate easy loading of the material. he should allow the vehicle inside, up to the location without any hindrance to the movement of vehicle of the purchaser. note: 2) custodian is advised to take all precautionary measures to avoid fire accident while gas cutting. purchaser has to make his own arrangements for cutting, lifting and loading of material and also any other equipment for the purpose and delivery of material. purchaser has to take all safety precautions/care for men & material while gas cutting and lifting of material. location: bin no 8001, power cars shop sc end/cws-lgd. custodian- sse/millwright/ws/lgd, controlling officer- cwm/ws/lallaguda, hsn code- 84261100. gst-18 percent. ss no: s/sd/lgd/insp/2026-27 dt 02.03.26 delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery

CTN :45082800

05 May, 2026 10.00 Lacs

Multi City - Telangana

Tender For procurement of swing and travel motors for sany make sy210c-9 model 0.9 cu.m hydraulic shovels working under non cost cap at oc-iii, rg-ii on proprietary basis.

Travel Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector