Latest traveling block repair Tenders | Government traveling block repair Tenders

CTN :44318524

13 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of others - scrap and condemned machine & plants consisting of m&p no. (1) 8977 jib crane (2) 9442 elect. hoist.(3) 9485 jib crane (4) 9504 jib crane (5) 10217 hyd. press (6) 9529 elect. hoist (7) 10349a induction furnace (8) 10667 toe load testing (9) 10675 toe load testing. conditions:-[1] as is where is basis.[2] minimum dismantle in sl. no. 01 to 07 in 02 parts and sl. no. 08 to 09 in 01 parts [3] all electrical fittings & electrical motor are included for sale. [4] before bidding bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale. [5] custodian may allow purchaser to bring crane if it is required and justified.[6] cutting/ dismantling of machine is to be done in such a way so that no adjacent machine, structure, installation or machine accessories etc get affected in any way.

Central Government/Public Sector

CTN :44319618

12 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond & u/s bhel make traction motor yoke type 4601(total:40 no's) used in ac emu/memu coaches as is where is basis wrt ds8 no: 022688-25-09571, custodian: sse/emu/avd .approx weight: 39560 kg (2) crane/jcb/forklift loading is permitted. pl no: 98327951 approx lot weight: 39560 kgs.

Central Government/Public Sector

CTN :44319619

12 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond & u/s over aged bhel make traction motor armature type 253bx(total:50 nos) as is where is basis. ds8 no: 022688-25-10041 dt 05.02.26 , location: back side entrance near gents rest room, emu car shed/avd. custodian: sse/emu/avd . note: crane/jcb/forklift loading is permitted. pl no: 98327951 . approx lot weight: 23485 kgs

Central Government/Public Sector

CTN :44319620

12 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - cond & u/s window a.c plants of various capacities of various sorts, shapes, makes and sizes with/without compressor, with/without evaporator coil, with/without condensor coil, with/without motor in full/part/ broken /dismantled /damaged/loose/ corroded condition with available ferrous/non ferrous fittings/attachments including loose parts if any in as is where is condition. note: 1. crane loading is permitted. 2. cpcb certificate and cum pass book isto be submitted at the time of delivery. approx lot weight:1950 kgs

Central Government/Public Sector

CTN :44319632

12 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - condemned and underaged m&p item cnc long bed milling machine with motors, bearing uc no : 131819006, make: goratu, comprising of total 21 parts(1.main body, 2.scrap conveyor 1, 3.machine body frame with tool post, 4.scrap conveyor 2, 5.control panel, 6.isolation transformer, 7.safety door 1, 8.safety door 2, 9. side cover 1 , 10.side cover 2, 11.side cover 3, 12. side cover 4 , 13.safety door 3, 14.operating pendant stand, 15.safety curtain stand, 16.coolant tank, 17.tank cover plate, 18.support bracket 1, 19.support bracket 2, 20.motor with gear box, 21.hydraulic power pack) in damaged condition with available attachments in as is where is condition. advice note no: 011277-25-00454 dt 21-10-25. custodian: sse-mw shop-lw-per. location: bay 2 of dbr shop/lw/per. approx lot weight: 24000 kgs. note: 1.cutting upto lorry loadable size is permitted. 2.crane /forklift loading is permitted.

Central Government/Public Sector

CTN :44288276

19 Mar, 2026 NA

Palakkad - Kerala

Tender For supply of fugi vfd drive for 20t hoist motor , fugi vfd drive for ct motor , fugi vfd drive for crane 11 kw (lt)

corporations/Associations/Others

CTN :44296878

17 Mar, 2026 30.88 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of than 2m , fab inst of back plate , align of motor to gb , removal of top cover of helical gb , maint work of gb , replacement of ip shaft brg of gb , replacement of the output wheel of gb , repairing of hold back , replacement of gb , oh of gb of conv. 4,10,11,12,15,16,k10 , oh of gb of conv 8 , 9 , oh of gb of tripper , re railment of 2 w align of tripper , rerailment of 4 w , align of tripper , repairing work of square bar of tripper , repairing of broken chain of tripper , replacement of chain sprocker of tripper , replacement of chain of tripper , replacement of gb of tripper , replacement of axle of tripper , fab. of vertical support of tripper , fab of middle support of tripper , leaving of squre bar channel bolting , oil filling insp of gb of conv syt , repairing oh of sump pump k10 ,17 , repairing of gravity take up box , assly of spare pulley with bearing , replacement of damaged slewing pinion , repl of shaft oil seal of slewing gb , trough roller repairing overhauling , return roller repairing overhauling , impact roller repairing overhauling , dismant replace of coupling of pusher , repl repair of support pipe of oh cond , replacement of stay wire turn buckle , alignment of conductor pole , alignment with motor and commissioning , replacement of damage wheels shaft gear , dismantling replacement break system , counter weight placing in position , dismant replace of coupling of wt , repair of damaged top beam of wt , replacement of damaged top beam of wt , repairing of connecting arms of wt , re setting of displaced rest wall , replacement repair of side jack , re setting of steel plate f top beam , servicing of side centre wheels of wt , replacement of platform rails with clits , replacement of cage ribs stiffeners , repair of round of side box beam , replacement of platform angle , repair of shock absorbers , replacement of platform plate , repairing of mesh jolly of wt , replacement parts alignment of motor , repair replacement of break system , repair replacement of guide rollers , replacement of packing on top beam , replacement of side jacks , rest walls , oh replacement rest rollers and cradle , replacement repair of platform rails , overhauling and alignment motor of bf , replacement of structure of bf , replacement of adjt bolt of belt feeder , overhauling of sf replace damage part , repairing of mesh jolly of swing feeders , oh replace parts of drum of conv 1 , oh replace parts of drum conveyor 2 , oh replace parts of drumcon 3 k13 , oh replace parts of drum conveyor 6 , oh replace parts of drum conveyor 7 , oh replace parts of drum conveyor 8 , oh replace parts of drum conveyor 9 , repair servicing of trolly of conv 1 , repair servicing of trolly of conv 2 , repair servicing of trolly conv 3k13 , repair servicing of trolly of conv 6 , repair servicing of trolly of conv 7 , repair servicing of trolly of conv 8 , repair servicing of trolly of conv 9 , replacement belt tensioning sys conv 1 , replacement belt tensioning sys conv 2 , replacement belt tensioning conv 3 ,13 , replacement belt tensioning sys conv 6 , replacement belt tensioning sys conv 7 , replacement belt tensioning sys conv 8 , replacement belt tensioning sys conv 9 , making of fasteners joint conv and bf , shifting laying of conv belt f j , greasing of drums up to dia 630 mm , greasing of drums dia 630 1000 mm , greasing of drums dia 1000 1290mm , replacement of drum up to dia 630mm , replacement of drum dia 630mm 1000mm , replacement of drum up to 1000 1290mm , re fitting of shaft of drum dia 630mm , re fitting of shaft of drum 630 1000mm , re fitting of shaft of drum 1000 1290mm , re fitting at brg portions of drums //bid details2 / 95630mm , re fitting at brg drums , replacement damper gate reducer system , replacement damper gate system new , fabrication ,erection centering plate , fbr repairing chute inspection door , repairing of chute by patching of holes , oh of 20 mt capacity crane conveyor 2 , oh of 20 mt capacity crane w

Central Government/Public Sector

CTN :44307144

11 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no.98030309.ferrous scrap consisting of condemned and unserviceable fabricated/loose angles/channels/plates/ sheets/ frames/chequred plates, blower covers/housings, racks,grill gates,rolling shutters,i-sections, trays, fabricated stands and fencings, ms/ gi pipes and tanks of sorts and sizes,fabricated pipe posts , tables,fabricated storage racks, weldmesh frames, radiator fan housings, control panel frame cutups parts, dust bins, control boxes ,battery boxes in full or broken condition,vrla cell trays , traction motor cover plates, ms sheet doors with frames , hand manual doors,rectifier covers, radiator frames,radiator end covers, alco pipes,sump doors, brackets of transformers ,push rods ,blower leaf , control panels, structures , berth iron frames, sump covers,lube oil filters, loco cutup parts, driver seats,traction motor covers, ms/gi sheets, oil cooler covers,test panels,cabin side wall cut pieces, ,window frames,lube oil and water line pipes,bend pipes,extension tanks,lube oil cooler top covers,tmt bars,water expansion tanks ,manifold covers,cattle guards, sand boxes ,alco loco driver chair frames, alternator fan covers,wagon doors,gutters,anchor link brackets, resistor cover and grid covers,cabin doors,bearing extractor,dbbm doom,bosch tank plates,wagon hand wheels, expressor tank and doors, nmg main doors, under slung water tanks, hand rails ,blc cuttings,oven cut parts, tm blower housing, battery box tray, loco motive pipes,battery box doors,manifold stands ,oven without non ferrous attachments, boiler tubes,acc housings, fabricated wheel stands, wagon brake beams, suspension tubes,tressel,bogie cutparts,mr tanks and other similar items heavy cutup in nature with or without original attachments note: [1] cutting is permitted. [2] purchaser should arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest and advised to follow the all safety aspects as per rule in force. [3] non ferrous items if any should be removed and returned to railways. [4] crane loading is permitted.

Central Government/Public Sector

CTN :44307147

11 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers, buffer casings with/without spindle, knuckles and coupler yoke for cbc,end shields,control arms,connecting rods, axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers,gear wheels of sizes ,screw couplings and its link parts, bearing cover casings,grease collors,tensioning rods,anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, small/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, huck bolts,huck bolt tails ,suspension tube components,car body assembly parts,gudgeon pins, fip, fip supports, ms plate cuttings, traction motor end shields, end locking screws ,bearing racers, locking plates, bearing adapters,valves of sorts and sizes , brake rigging components ,msu tubes, ctrb bearings and its components, connecting rod assemblies, buffer plunger full assemblies , valve springs , buffer spindles, pistons, air bellow springs, ring oiler assemblies, axle box covers, angle cut pieces , main bearing caps, expressor casings, connection straps, cam shaft parts, double flanged pipes, bss hanger pins, pull rods,damper brackets,center pivot top and bottom parts, and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found, should be removed and returned to railways by the purchaser.

Central Government/Public Sector

CTN :44307148

11 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable 10 cwt capacity pneumatic power hammer [fss-h-18] with pulley, pulley guard, pallet, anvil (foundation) and its bolts, wedge and other original attachments, without motor and electrical panel. id no.312108187, u/c no.121223006.make: beche and crohshockes. vide udm scrap advice note no. 012282-25-00917 dt. 26.11.25. approximate total weight %u2013 10500 kgs [cast iron - 9494.5 kgs, mild steel-1000 kgs, brass/bronze -5 kgs, copper %u2013 0.5 kg]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging with jcb is permitted to remove the anvil (foundation). 6. oil should be drained and returned to railways by the purchaser. 7. custodian should cut the power supply during delivery if required. 8. motor bed and ladder with incoming cables are not for sale. 9. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 10. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 11. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 12. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 13. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian : sse/mmw/goc

Traveling Block Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors