Latest travelling crane Tenders | Government travelling crane Tenders

CTN :45334775

19 Jun, 2026 NA

Multi City - Multi State

Tender For power supply arrangement & electrical wiring in connection to "proposal for construction of new shed for stocking materials of 140 t crane, detc & tower car at crane shop and flooring of wrs-iii etc. inside workshop under sse/w/ws/jmp

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

CTN :45189857

28 May, 2026 14.00 Lacs

Faridabad - Haryana

Tender For supply, erection and commissioning of 02 no. six directional eot (electric overhead travelling) crane of 05 tonne capacity at banarasi pump house and kotla pump house by conversion of manual h.o.t. to eot(electric overhead travelling crane) under y.

Central Government/Public Sector

CTN :41045750

21 May, 2026 17.88 Crore

Hyderabad - Telangana

Tender For bid to ras corrigendum : custom bid for services - comprehensive annual maintenance contract at user location dappar chandigarh for 5 years- annual maintenance contract is for the allied services of tp infrastructure at user location, dappar of indian army. the scope of work is to provide services of five (05) year comprehensive maintenance and 24x7 operation and maintenance (including supply of consumables) of below mentioned systems-1 hvac system, 2 fire fighting & fire alarm system, 3 building management system, 4 operation & maintenance of electrical eqpt:- (a) dg sets., (b) transformer & related eqpt., (c) panel boards, (d) ht/lt cables, (e) earthing pits & related eqpt., 5 electrical overhead travelling cranes (eot cranes), 6, any other electrical accessories connected to the systems mentioned in sl.no. 1,2,3,4 & 5. 7 one time repairs .

CTN :44946294

16 May, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : design, certification & commissioning of tower crane by ica , supply of 10t tower crane with 40 m jib , installation and commissioning of 10t tower cranes , 5 yrs comprehensive amc of 10t tower crane

CTN :45018875

15 May, 2026 107

Bengaluru - Karnataka

Tender For beedi deepa nirvahane - alugcable4cx35, aluminium cable 25 sq mm, fuse carrier 200a, high must 12.5 mtr, top 100mm and bottom 310 mm dia galavnized in single hotdip as per bsen iso 1461/astm a123, the mast shall be created on existing rcc footing,with 6nos 150w led flood light, high mast lighting 8meter tower with ladder and led flood lighting system, labour charges for highmast service including labour,crane ,transportation and other expenses, highmast timer, highmast light 9 meter full set with 150w flood light 6 nos, highmast light 9 meter full set with 150w flood light 4nos, highmast lights 9meter full set with 200w led flood light 4nos, high mast 12/12.5 mtrs, light fixing charge/gptpzp6, pipe clamp set/gptpzp6, meter box/gptpzp6, high mast light 10m height, alluminium 20sq cabel, led bulb 40w, led street light 50w, led street light 150w, led street light 100 wattage, led flood light 300w, led flood light 250w, led flood light 200w, led flood light 150w, copper cabel 10 sq mm, copper cabel 6 sq mm, copper cabel 1 sq mm, copper wire 16 sq mm, labour charges, tpn-63a, led serial lights, cable tie 12inch, cable tie 10inch, ceiling fan normal, electrical porcelain fuse-32a, led street light 120watt , led 60watt bulbs, led 50watt bulbs, led 30watt bulbs, led 20watt bulbs , cable tie 8inch, contractor with no protection 40a, aluminium cable 16sqmm, waterproof tape, single phase meter box, sodium light 100watt choke, flood light 150/200/250watt, led street light 200w, dp switch 63amp, dp switch 32amp, aluminium cable 6sqmm, aluminium cable 4sqmm, aluminium cable 2.5sqmm, aluminium cable 10sqmm, aluminium cable 2c6sqmm flat , bulb doom 50watt, three phase meter box, test lamp kit, ms fittings with clamps 1p5 inch, screwdriver set big size, enclosure box-mcb , mcb 2pole 32a, mcb single pole 32a, led street l 50w, led street l 150w, led street l 100w, led electronic open choke-150w, insulation tape w, auto on and off timer, change over 20amps, bed switch-b, high mast led bulb 200 watt (street light items), high mast led bulb 150 watt (street light items), high mast led bulb 100 watt (street light items), led bulb 50 watt (street light items), led bulb 32 watt (street light items), led bulb 25 watt (street light items), led bulb 23 watt (street light items), led bulb 20 watt (street light items), street light shade (street light items), led street light set 50 watt (street light items), led street light set 40 watt (street light items), led street light set 25 watt (street light items), street light bend pipe and clamp (street light items), tester (street light items), screw driver (street light items), cutting player (street light items), gang box 3 way (street light items), gang box 2 way (street light items), gang box 1 way (street light items), tp switch (street light items), dp switch (street light items), switch 16 amps (street light items), switch 6 amps (street light items), mcb 4 pole 63 amps (street light items), mcb 4 pole 32 amps (street light items), mcb 3 pole 63 amps (street light items), mcb 3 pole 32 amps (street light items), mcb 32 amps (street light items), mcb 25 amps (street light items), mcb 10 amps (street light items), mcb 6 amps (street light items), copper wire 4.0 sq mm (street light items), copper wire 2.5 sq mm (street light items), copper wire 2.0 sq mm (street light items), copper wire 1.5 sq mm (street light items), cg holder (street light items)

Central Government / Public Sector

CTN :45056792

26 May, 2026 NA

Ramagundam - Andhra Pradesh

Tender For design, manufacturing, supply & installation, commissioning and proveout of 15t capacity electric overhead travelling crane. detailed technical literature and scope of work as per specification sr.dme/sc/eot-15t/remote/2023 rev-0 attached. ]

CTN :45042578

11 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - cond. different types of m&p items consisting of 1] sc. power pack, petrol driven engine [hrd], make- lukas, qty-1 no, 2] sc. control desk, make- lukas, qty-1 no, 3] sc. re railing bridge 1.1 mtr height 184 mm, make- lukas, qty-1 no, 4] sc. telescopic jack hp 65/t 400r, make- lukas, qty-4 nos, 5] sc. telescopic jack hp 25/t 450r, make- lukas, qty-4 nos, 6] sc. claw jack hp 50/p 850r, make- lukas, qty-3 nos, 7] sc. holding wire rope, make- na, qty-5 nos, 8] sc. inflatable tower light m/c 3.5 hp, make- aska, qty-2 nos, 9] sc. power pack 8.3 hp, diesel driven [hre], make- greaves ltd., qty-2 nos, 10] sc. portable generator set petrol/kerosene driven ,1.5 kva , make- greaves ltd., qty-6 nos, 11] sc. re-railing bridge 2.2 mtr, make- lukas, qty-1 no, 12] sc. re-railing ramp [ci] , make- na, qty-2 nos, 13] sc. pulling device,cap-220 kn, make- lukas, qty-1 no, 14] sc. jack 65/t small, make- lukas, qty-1 no, 15] sc. jack lukas 100 kn single act dia 60 mm, make- lukas, qty-1 no, 16] sc. jack 25/t 185 r [small], make- lukas, qty-2 nos, 17] sc. jack 65/t [big], make- lukas, qty-2 nos, 18] sc. rail grip for axle pusher, make- lukas, qty-1 no, 19] sc. hydraulic jack [manual] 10/t-2 nos & 30/t-1 no, make- na, qty-3 nos, 20] sc. hose pipe rubber, make- na, qty-11 pairs, 21] sc. cutter lukas [hrd], make- lukas, qty-1 no, 22] sc. spreader with spare nose, make- lukas, qty-1 no, 23] sc. combo cutter lukas, make- lukas, qty-1 no, 24] sc. base of jack 25/t , make- lukas, qty-1 no, 25] sc. base of claw jack, make- lukas, qty-2 nos, 26] sc. line closure for pulling device , make- lukas, qty-2 nos, 27] sc. axle pusher head , make- lukas, qty-4 nos, 28] sc. claw jack head , make- lukas, qty-4 nos, 29] sc. height piece for [radious plate] telescopic jack [ai] , make- lukas, qty-2 set, 30] sc. claw jack rope head , make- lukas, qty-4 nos, 31] sc. bridge stopper[triangular shape] , make- lukas, qty-3 nos, 32] sc. roller carriage , make- lukas, qty-3 nos, 33] sc. roller carriage top plate , make- lukas, qty-2 nos and 34] sc. portable diesel generator set , make- greaves ltd., qty-1 no. condition- 1. lot will be delivered as per qty mentioned in description column, 2. materials like nearby other machine and ferrous , nonferrous , ss items etc near/surrounding the offered items is not allowed for lifting or taking delivery and the same is required to be handed over to the custodian if so found, 2. picking and choosing of materials near the offered items is not allowed.3. purchaser has to make his own arrangement for lifting and taking delivery of the lot.4. custodian may allow purchaser to bring crane if it is required and justified.5. the lot will be sold on "as is where is basis", 5. cutting/dismantling of sold lot is allowed.

State Government

CTN :44964311

30 Apr, 2026 4.91 Lacs

Jaipur - Rajasthan

Tender For installation and commissioning of hand operated travelling crane at new filter plant cwr for motor pump sets of cisf amer under jurisdiction of city division-iii (n), jaipur.

CTN :44796845

27 Apr, 2026 14.00 Lacs

Faridabad - Haryana

Tender For corrigendum : supply, erection and commissioning of 02 no. six directional eot (electric overhead travelling) crane of 05 tonne capacity at banarasi pump house and kotla pump house under y.w.s. (mech) division, faridabad. 0

Travelling Crane Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

State Government