Latest travelling water screen repair Tenders | Government travelling water screen repair Tenders

corporations/Associations/Others

CTN :45315789

02 Jun, 2026 5.57 Lacs

Multi City - Telangana

Tender For supply and fixing of aluminium composite cladding and granite cladding to the ongoing lift work at lb nagar zonal office under saroornagar circle-12, lb nagar zone, mmc.

corporations/Associations/Others

CTN :45300161

02 Jun, 2026 4.25 Lacs

Alwar - Rajasthan

Tender For supply and fixing of high mast light material at mia alwar - providing & fixing of ik08 ip-66 protected high power led flood light system with single piece pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on led to achieve various beam angles, of high power led of 3 to 5 watt each . integrated potted driver as a unique bis r number having efficiency more than 85 % and in compliance to bis certified and trade mark certificate. the system level luminaire efficacy >=125 lm/ wt. led driver input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety .power factor >0.95 , thd(i) 10% , driver current =750ma. driver should be phase to phase protection of 440 v for 4 hrs. electrical connector , surge protection min >=4kv internal and 10kv external but inside driver compartment, system life of 50000 burning hours with 70% of initial lumens maintained, cri>70 and cct 5700k 355k. manufactures word mark/name engraved/embossing/screen printing on die cast housing to allow traceability/authenticity. fixture shall be is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., high power led flood light minimum lumen output 14800 lm

State Government

CTN :45293777

29 May, 2026 3.54 Lacs

Multi City - Telangana

Tender For procurement of tools and equipment for lascars/helpers towards operation and maintenance activities for irrigation sub division no.1, nizamsagar - supply and transportation of 1 hp single phase self priming mono block ip44 motor pumpset. makes: texmo / cri / ksb / aryenvarsha / lubi / falcon , supply and transportation of 5 hp three phase mono block ip44 motor pumpset. makes: flowell / waterman/ ellen / narayani / sai varsha / sterling / duke / samudra / ajantha , supply of 13 mm fibra fiberglass measuring tape - 30m/100ft with unbreakable abs case, durable curved mechanism handle & steel end hooks, make: freeman as directed by engineer-in charge , supply of 2.00 hp four stroke straight shaft brush grass cutters with 2-teeth blade (14 inches) for cutting, which is 360° inclinable. ideal for tough, sloping, and rugged terrains. make:-honda, agriplus, neptune, green leaf as , supply of 4 sq.mm 3 core pvc / xlpe insulated sheathed multi core bright annealed bare copper conductor heavy duty industrial cables for voltage grade upto 1100 volts as per is: 694:2010 including all transportation charges etc complete. , supply of axe with wooden handle as directed by engineer-in charge , supply of chain saw 22"(petrol) for tree cutting with 58cc powered as directed by engineer-in charge , supply of chains for chain saw machine as directed by engineer in charge , supply of electric shock proof hand gloves as directed by engineer-in-charge , supply of gumboots with steel toe isi mark for men as directed by engineer-in-charge , supply of hammer as directed by engineer-in-charge , supply of hand saw with wooden handle(iron prunning curved saw) for grass, wood, tress cutting as directed by engineer-in charge , supply of heavy duty steel tiller pitchfork with handle as directed by engineer-in-charge , supply of hoe tool (favda) for digging heavy duty as directed by engineer-in-charge , supply of iron digging bar/crow bars as directed by engineer-in charge , supply of nylon rope of 20mm diameter 60 mts in length as directed by engineer-in-charge , supply of plastic multipurpose gamelas (43.8 cm x 39.2 cm x 13.2 cm) as directed by engineer-in charge , supply of rechargeable aluminium body led torch with 120-volt ac/dc charger long range as directed by engineer-in charge , supply of saddle / clamps suitable for fixing 4 to 10 sqmm 2 core cable. , supply of safety helmet hard hat steeplejack climbing work construction worker adjustable headband 2 side venting design cushioning as directed by engineer-in-charge , supply of sickle with wooden handle for weed cutting as directed by engineer-in charge , supply of sluice operating handles as directed by engineer-in-charge , supply of taparia combination spanner set css25 (25 pieces) as directed by engineer-in charge , supply of tool box & screw driver kit as directed by engineer-in-charge , supply of waterproof standard length, high quality polyester fabric double coating reversible rain coat with hood & inner mobile pocket. set of top and bottom as directed by engineer-in charge

CTN :44721682

27 May, 2026 29.11 Lacs

Indore - Madhya Pradesh

Tender For bid to ras supply of panneling and partitioning work d d - 4 wall panelling pvc panel with thickness 7mm wooden texture , 4mm toughened glass bds with vinyl print photographs and spacers 6 x4 feet , 4mm toughened glass bds with vinyl print photographs and spacers 6x3 feet , 4mm toughened glass bds with vinyl print photographs and spacers 5x3 feet , 4mm toughened glass bds with vinyl print photographs and spacers 4x4 feet , 4mm toughened glass bds with vinyl print photographs and spacers 2x1.5 feet , weather proof 3d murals size 10 x 10 feet mix of resin and fiber glass with antique colour polish finish , plastic planters with base , hanging garden incl frame 8x6 feet along with 48 planters 6 coloumn with 8 planters each , hanging garden incl frame 5 feet ht x 3 feet width working area along with planters , acp aluminium composite panel 4x8 feet with ms pipe frame with metallic ladders of size 8 inch and bayonet insignia ss 304

CTN :45288161

20 Jun, 2026 30.00 Lacs

Badnagar - Madhya Pradesh

Tender For supply of nirman samgri - paver block (i mould) 80 mm, 160mmx200mm, paver block (i mould) 60 mm, 160mmx200mm, touch wood paint, , , rcc pole hight 7 feet with fixing, . . , , , . . , , , black soil, structure steel, jcb with fuel and operator, empty cement bag, aluminium section with glazing complete, hamour machine, waterproof solvant, mason, majdoor, tractor trolly with fuel and operator, dumper with fuel and operator, iron girder, sand, precast column 10"x10"x8, rcc 3 seater bench, pvc door 2", tree guard 400 mm dia, labour for panter, complete pvc speed bracker install, kota stone work, adhesive cement, wire mess (jali), gi sheets (22 guage), stainless steel (grade 304), gi sheet (26 guage)

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45108037

08 Jun, 2026 90.00 Lacs

Anuppur - Madhya Pradesh

Tender For inviting rate of contractforelectrical materials for all electrical maintenance workatmunicipalcouncil bijuriforyear2026-27 - inviting rate of contract for electrical materials for all electrical maintenance work at municipal council bijuri for year 2026-27, bulb (200 w) bajaj, bulb (60 w) bajaj, angle holder anchor, bulb holder rk light, cfl bulb 14/15 w bajaj, cfl bulb 5/8 w bajaj, cfl bulb 18 w bajaj, cfl bulb 23 w bajaj, exhaust fan (18 inch) hevelles or bajaj, exhaust fan (12 inch) hevelles or bajaj, submersible copper wire 4mm, 3 core isi mark, submersible copper wire 2.5 mm,3 core isi mark, copper wire 1mm (90m roll) hevelles anchor or bajaj isi mark, copper wire 1.5 mm (90m) roll hevelles anchor or bajaj isi mark, copper wire 2.5 mm (90m) roll hevelles anchor or bajaj isi mark, copper wire 4 mm (90m) roll hevelles anchor or bajaj isi mark, copper wire 6 mm (90m roll) hevelles anchor or bajaj isi mark, copper wire 10 mm (90m) roll hevelles anchor or bajaj isi mark, copper wire 16 mm (90m) roll hevelles anchor or bajaj isi mark, copper wire 4 mm (90m) roll hevelles anchor or bajaj isi mark, aluminium wire 1.5mm (90m) roll rk light isi mark, aluminium cable, 2core, 2.5 mm (90m roll) rk light isi mark, aluminium cable, 2core, 4 mm (90m roll) rk light isi mark, aluminium wire 6 mm (90m) roll rk light isi mark, aluminium cable, 2core, 10 mm (90m roll) rk light isi mark, aluminium cable, 2core, 16 mm (90m roll) rk light isi mark, aluminium cable, single core, 4 mm (90m roll) rk light isi mark, aluminium cable, 2core, 6 mm (90m roll) rk light isi mark, aluminium cable, 2core, 10 mm (90m roll) rk light isi mark, flexible copper wire 23x76 (90m roll) rk light isi mark, aluminium cable, 4core, 6 mm (90m roll) rk light isi mark, aluminium cable, 4core, 10 mm (90m roll) rk light isi mark, aluminium armoured cable, 4 core , 6mm rk light isi mark, aluminium armoured cable, 2 core , 10mm rk light isi mark, aluminium armoured cable, 4 core , 50mm rk light isi mark, aluminiumarmoured cable, 4 core , 25mm rk light isi mark, aluminium armoured cable, 4 core , 16mm rk light isi mark, aluminium armoured cable, 4 core , 35mm rk light isi mark, aluminium armoured cable, 4 core , 50mm rk light isi mark, switch socket combined with box (15a) rk light isi mark, socket (6a) rk light isi mark, ceiling fan ,1200mm hevelles, ceiling fan,1400mm hevelles, mcb (6 to 32a) rk light or hevells, mcb 32a switch type hevells, mcb 100amp rk light or hevells, isolator (40to 63a) rk light or hevells, isolator (100a) rk light or hevelles 3 phase, isolator 4 core, 125a rk light or hevelles, mcb box, 2 way rk light isi mark, mcb box, 4 way rk light isi mark, mcb box, 10 way rk light isi mark, mcb box, 12 way rk light isi mark, 6 way gang box rk light isi mark, 8 way gang box rk light isi mark, main switch 16a dp bajaj or hevelles, main switch 32a tp bajaj or hevelles, main switch 100a tp bajaj or hevelles, main switch 63a tp bajaj or hevelles, main switch 200a 3-0 bajaj or hevelles, main switch 300a 3-0 bajaj or hevelles, chenge over 300a bajaj or hevelles, chenge over 200a bajaj or hevelles, switch 6a bajaj or hevelles or anchor, grip 16a bajaj or hevelles, grip32a bajaj or hevelles, grip 63a bajaj or hevelles, grip 100a bajaj or hevelles, grip 200a bajaj or hevelles, grip 300a bajaj or hevelles, grip 500a bajaj or hevelles, dp main switch bajaj or hevelles, pvc pipe 3/4 inch rk light, pvc pipe 1 inch rk light, condenser 4mfd hevelles or bajaj, pvc clip 1 inch rk light, flexible pipe pvc ,1 inch rk light, plug top 16a rk light, plug top 6 a rk light, junction box, 4way 1 inch rk light, junction box, 4way 1/3inch rk light, pvc band 1 inch rk light, pvc band 1/3 inch rk light, modular switch 6a rk light, modular socket 6 a rk light, modular socket 16 a rk light, modular switch 16a rk light, pvc casing patti rk light, modular fan ragulator rk light, bell switch 6a rk light, bell 1switch modular 6a rk light, bell (ding dong) bajaj or hevells, phone wire, 3core rk lig

CTN :45142207

25 May, 2026 9.90 Lacs

Hoshangabad - Madhya Pradesh

Tender For notice inviting item rate of various item for maintanance and repair work of water supply for financial year 2026-27 at timarni - texomo/ luvi/ tormac/ cri company 3 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 8 stages, texomo/ luvi/ tormac/ cri company 5 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 8 stages, texomo/ luvi/ tormac/ cri company 7.5 hp hp submersible pump (with bronze / stainless steel (cf8m) impeller) up to 8 stages, texomo/ luvi/ tormac/ cri company 10 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 12 stages, texomo/ luvi/ tormac/ cri company 12.5 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 12 stages, copper cable 3 core 4 square mm, copper cable 3 core 6 square mm, aluminium 4 core cable 10mm, aluminium 4 core cable 12mm, aluminium 3 core cable 16mm, cutout 32 ampere, cutout 63 ampere, cutout 100 ampere, suction pipe 2 inch, suction pipe 2.5 inch, suction pipe 3 inch, hdpe pipe 2 inch, hdpe pipe 3 inch, hdpe pipe 0.5 inch 8kg, hdpe pipe 0.75 inch 8kg, hdpe pipe 1 inch 8kg, hdpe pipe 4 inch 8kg, hdpe pipe 0.5 inch 6kg, hdpe pipe 0.75 inch 6kg, hdpe pipe 1 inch 6kg, hdpe pipe 1.25 inch 6kg, hdpe pipe 0.5 inch 10kg, hdpe pipe 6 inch 10kg, hdpe pipe 1 inch 10kg, hdpe pipe 1.25 inch 10kg, pvc loose nali 0.75 inch, pvc loose nali 1 inch, pvc loose nali 1.25 inch, pvc pipe 90mm 4kg, pvc pipe 90mm 6kg, pvc pipe 90mm 8kg, pvc pipe 110mm 4kg, pvc pipe 110mm 6kg, pvc pipe 110mm 8kg, pvc pipe 160mm 4kg, pvc pipe 160mm 6kg, pvc pipe 160mm 8kg, pvc pipe 200mm 4kg, pvc pipe 200mm 6kg, pvc pipe 200mm 8kg, pvc t 12mm 6 kg, pvc t 25mm 6 kg, pvc t 32mm 6 kg, pvc t 63mm 6 kg, pvc t 75mm 6 kg, pvc t 90mm 6 kg, pvc t 110mm 6 kg, pvc t 160mm 6 kg, pvc t 200mm 6 kg, pvc elbow 12mm 6 kg, pvc elbow 25mm 6 kg, pvc elbow 32mm 6 kg, pvc elbow 63mm 6 kg, pvc elbow 75mm 6 kg, pvc elbow 90mm 6 kg, pvc elbow 110mm 6 kg, pvc elbow 160mm 6 kg, pvc elbow 200mm 6 kg, reducer socket 12x25mm 6 kg, reducer socket 25x32mm 6 kg, reducer socket 32x63mm 6 kg, reducer socket 63x75mm 6 kg, reducer socket 63x32mm 6 kg, reducer socket 63x90mm 6 kg, reducer socket 90x110mm 6 kg, reducer socket 90x160mm 6 kg, reducer socket 160x200mm 6 kg, end cap 12mm 6 kg, end cap 25mm 6 kg, end cap 32mm 6 kg, end cap 63mm 6 kg, end cap 75mm 6 kg, end cap 90mm 6 kg, end cap 110mm 6 kg, end cap 160mm 6 kg, end cap 200mm 6 kg, pvc handle valve 0.5 inch, pvc handle valve 0.75 inch, pvc handle valve 1 inch, pvc handle valve 1.25 inch, pvc handle valve 2 inch, pvc handle valve 2.5 inch, pvc handle valve 3 inch, mta 0.5 inch, mta 0.75 inch, mta 1 inch, mta 1.25 inch, mta 2 inch, mta 2.5 inch, pvc pipe 63mm 4kg, pvc pipe 75mm 4kg, fta 1 inch, fta 3 inch, fta 2 inch, fta 4 inch, pvc repair patta 2.5 inch, pvc repair patta 3 inch, pvc repair patta 4 inch, pvc repair patta 6 inch, pvc repair patta 8 inch, pvc repair patta 10 inch, pvc bend 63mm, pvc bend 75mm, pvc bend 110mm, pvc bend 160mm, pvc bend 200mm, column pvc pipe 1 inch 20kg, column pvc pipe 1 inch 27kg, column pvc pipe 1.25 inch 20kg, column pvc pipe 1.25 inch 27kg, column pvc pipe 2 inch 20kg, column pvc pipe 2 inch 27kg, rubber waysr 2 inch, rubber waysr 2 point 5 inch, rubber waysr 3 inch, rubber waysr 4 inch, geti, pawda, hattha wood, pvc tub 18 no., tagari pvc, aari patta, aari handle, torch, solven 100 gram, solven 250 gram, band patti 0.50 inch clip, band patti 0.75 inch clip, band patti 1.25 inch clip, band patti 2 inch clip, band patti 2.5 inch clip, band patti 3 inch clip, line pana 6 inch, line pana 9 inch, line pana 12 inch, line pana 24 inch, line pana 30 inch, pana set all size, tester, screwdriver, pliers, steel grip tap, pechroll, teflon tap, grees, glan dori 10mm, glan dori 12mm, nylon rassi, nareti rassi, gloves leather, grinder patta, grinder concrete patta, m-seal, ferrule 1/2 inch, ferrule 1/4 inch, clamp 3 inch, clamp 4 inch, clamp 6 inch, lock heavy, hich pin, brass handle valve 0.5 inch, c

CTN :45291299

12 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For providing of custom bid for services - aluminium partition work

CTN :45303047

13 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of aluminium partitioning work , building and room painting distempering and outside walls putty primer with external , printing of labform designing and formatting of lab forms as per client requirement , almirahs mild steel and godrej lock , rblinds with fixing , 5kva inverters with electrical wiring fixing , 3blue star water coolers , officer workstation with computer tables , digital signature with bio metryc system , printer cum heavy duty scanner , fiber pharmacy issue boxes

Travelling Water Screen Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government