Latest treadmill machine Tenders | Government treadmill machine Tenders

State Government

CTN :45601849

08 Jul, 2026 2.20 Crore

Raigarh - Chhattisgarh

Tender For corrigendum : supply of back extension equipment , static cycle outdoor exercise cycle , chest press , body rotation or twister , shoulder builder , horse rider , seating and standing twister , parallel bar , metal swing with back support , air walker , loop ring , double fitness bar , push up bar , leg press - outdoor gym equipments (q3) , air walker / stroller - outdoor gym equipment (q3)

Central Government/Public Sector

CTN :45688661

01 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-146; e24 during routine damage control and fire fighting exercise 01 no 15 tph submersible pump is not getting started and 10 tph submersible pump discharge side ..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-146; e25 rubber mat flooring in ac compartment is deteriorated and damaged due to fair life wear and tea the same is required to be renewed with a new rubber mat ..

CTN :45646932

07 Jul, 2026 2.33 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground-establishment of sports infrastructure facilities at kalavayal ground in puthenkurish grama panchayath in kunnathunadu lac, ernakulam- supply and installation of open gym equipment - retender - open gym equipments, od48095/2026-2027 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes 88mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe. seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. end closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. pin 25 mm m.s. bright bar pin. circlips a 24 circlips are used for assembly. bearing bushes - 60 mm od seamless pipe / bar. bearing- use is 6005 permanent lubricated reputed brands. grips high quality rubber 46 mm od. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48569/2026-2027 cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b? class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od b class g.i. pipe. and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality rubber. bearing- use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25mm m.s. bright bar. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 80-100 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48098/2026-2027 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to s

CTN :45646934

07 Jul, 2026 2.25 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground -development of jai hind stadium in njarackal grama panchayath in vypin lac, ernakulam district-supply and installation of open gym equipment - outdoor gym equipments, od268048/2025-2026 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od “b” class gi pipe. foundation plate –m.s. round plate of ø 250mm & 8 mm thick. foundations cover capdome shape of pp / nylon / hdpe material. remaining frame -made up of ø 48 mm od “b” class g.i. pipe. handle - made up of ø48mm od “b” class g.i. pipe. link - made up of ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing cap’s– pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap – dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268050/2025-2026 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od ?b? class gi pipe dually bending design. foundation plate?m.s. round plate of ø 250 mm & 8 mm thick. paddle? ø 42 mm od round gi pipe. handle ? ø 33 mm od ?b? class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s -pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin?s ? ø 25mm m.s. bright bar pin. circlips? a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268054/2025-2026 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes - 88 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe.seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. e

CTN :45634709

20 Jun, 2026 NA

Vadodara - Gujarat

Tender For tender for equipments of physiotherapy unit for vadodara municipal corporation. - interferential therapy unit, exercise staircase(for wooden stairs), short wave diathermy machine 1000 watt, transcutaneous electrical nerve stimulation (tens) unit, three wheel shoulder builder/arm wheel-outdoor gym equipment, upright exercise bike, excel parallel bars for gymnastics adjustable from 150 cm to 200 cm, ultrasound therapy unit, treatment couch /examination couch, intermittent lumber traction belts with bar

CTN :45601898

09 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of rowing machine , treadmill machine , barbell , olympic barbell 50mm box rod , olympic barbell 50mm 3 ft rod , olympic barbell 50mm 4 ft ez rod , olympic barbell 50mm 4 ft rod , olympic barbell 50mm 6 ft rod , olympic barbell 50mm 7 ft rod , bumper plates 5 kg , bumper plates 7.5 kg , bumper plates 10 kg , bumper plates 15 kg , bumper plates 20 kg , bumper plates 25 kg , kettle bell 10 kg , kettle bell 12.5 kg , kettle bell 15 kg , flat bech , adjustable bench , leg press machine , 4 station multi gym abs bench lat pull butterfly and shoulder press , tyre flip 180 , functional trainer machine , biceps curl machine , plyo box , hyperextension bench , decline bench crunch , nylon rope , forearm machine

corporations/Associations/Others

CTN :45562275

29 Jun, 2026 4.30 Lacs

Hosur - Tamil Nadu

Tender For supplying and fixing of outdoor gym equipments ward no.36, in manjushree nagar park in hosur citymunicipal corporation - supplying and fixing of double arm strengthener 100x100 mm main pipe with four wheels and knobs on complete as per standard specifications, supplying and fixing of double shoulder strengthener with two big wheels including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of double flat walker 100x100 mm main pipe with four handles and anti skid pedal plates knobs including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of graded pull up bar 75x75 mm main pipe with 50mm handles with two heights including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of heavy horizontal bar 60 mm leg pipes and two 6 feet 50 mm hand pipe including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of double twister 75x75 mm main pipe with two anti skid 18mm metal checked plates with sealed bearing including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of health walker 100x100 mm main pipe with two legs in anti skid pedels mounted on sealed heavy duty bearing including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of dip bar 75x75 mm main pipe with 32mm pipe handle bar including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of fit gym set 75x75 mm main legs heavy main frame with 1 pair roman rings and a trapezoidal including cost and conveyance and fixing charges on complete as per standard specification, supplying and fixing of double waist exercise equipments including cost and conveyance and fixing charges on complete as per standard specification

CTN :45512197

02 Jul, 2026 NA

Darrang - Assam

Tender For supply of multigym equipments c c - heavy duty treadmill with power backup and stabiliser , six station multi gym , rower cardio equipment , elliptical cross trainer stepper , exercise cycle , workout bench , crest fitness stair mil with power backup and stabiliser , dumbbell and barbeell sets three hundered kilogram with stand , yoga and floor mats , full body massage chair with power backup and stabiliser , angled leg press , dehumidifier air purifier with enviroment controller for gym with stabiliser

CTN :45367004

15 Jun, 2026 80.0 Thousand

Kamrup - Assam

Tender For bid to ras supply of treadmill machine 4hp, 110kg digital display , gym cycle , dumbbell 03 kg , dumbbell 05 kg , dumbbell 8 kg , dumbbell 10 kg , push up bar foam grip handle , fitness bench with 07 position adjustable , gym ball 75cm , gym bar 5 feet straight bar 19mm weight lifted rod , weight plate 03 kg 05 kg and 10 kg , hand grip , skipping rope , mirror for gym wall 7 x 5 feet , multi bench press machine without attachment , rubber matt 2 by 2 for gym room 18 x 17 feet

CTN :45421338

19 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of provision of gym accessories - weight plate tree (nifs) , tier dumbbell rack ,heavy duty dumbbells , rubber plate , olympic barbell , t bar , d handle , multi -functional training with smith machine , commercial treadmill machine , lat pull down , air rowing machine (nifs) ,rubber floor tiles , wide chest press bench , olympic adjustable bench press machine , multi adjustable bench , shoulder press machine , leg press machine with attached weight , leg curl machine ,anti -burst gym ball , straight bar lat pull down cable attachment , step up box , split air conditioner , music sys , water dispenser

Treadmill Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others