Tender For auction sale of depot non ferrous scrap - aluminium fittings scrap - 98230013(13) cond. and u/s aluminium scrap consisting of tags, air filters, led fittings, fan blades, outdoor lights, avm pads, idli boxes, vessels, cookers, junction boxes, down lights, solar panel frames, acsr wires, dummy sockets, blinking lights, doom covers, bm&bc parts, hear fings, wra pump controllers, cooler, street lights, spray tins, door frames, window frames, etc. available in the bin with or without attachments. total gross weight: 8180 kgs; said to contain total aluminium content: 6376.9 kgs approx.; total ms content: 745.2 kgs approx., total gi content: 273 kgs approx., total stainless-steel content: 84 kgs approx. total plastic, rubber, fabric, foam, nv etc. content: 700.9 kgs approx. hsn code: 76020010 gst @18% on forward charge basis. note: 1) delivery on actual weighment basis only. 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained. 5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc. location: non-ferrous yard bin no:24
Tender For supply of 11 point 7 hp engine and high head water pump as per ts , puf tank 500 ltrs as per ts , spares tools oblique kit for each engine as per ts , high pressure pipe thermoplastic elastomer comma polyester yarn braided high pressure to conforming is code 12585 , tank connector , ball valves brass min 15mm , non return valve , pressure relief valve , by pass valve , suction stainer , 25 mm inner dia hdpe overflow and drain out pipe along with sockets of length 2 mtr for each tank , suction pipe 25 mm dia of length 3 and 4 mtr , hand operated rotary pump , hack saw blade of size 300 x 13 x 0 point 65 mm , closed grip heavy duty hand hack saw frame suitable for 300mm blades
Tender For supply of paper a4 size , paper legal , paper legal dupl , glossy paper 250 gsm , bond paper , pen v5 blue , reynolds pen blue , reynolds pen black , reynolds pen red , sketch pen black , sketch pen blue , marker permanent black and blue , marker permanent red , marker temporary black and blue , cd marker pen black , correction pen whitener , highlighter , pencil , sharpener , eraser , cello tape 1 inch size red , cello tape0.5 inch size red , cello tape 1 inch size blue , cello tape 0.5 inch size blue , cello tape 0.5 inch size green , cello tape 0.5 inch size yellow , cello tape 0.5 inch size transparent , cello tape 3 inch size brown , cello tape 3 inch size transparent , cello tape 2 inch size transparent , cello tape 1 inch size transparent , brown tape 2 inch size , glue stick , fevicol 250 gm , paper weight , pen stand , calculator , stapler small , stapler medium , stapler pin no 10 1m , stapler pin no 24 6 1m , binder clip 32 mm large , binder clip 15 mm , binder clip medium , u clip plastic coated , drawing sheet all colour , stick flag paper , stick note pad medium , stick note pad large , talc sheet , steel cutter , cutter blades , file binder , file cover crest , file cover plain , file cover white crest , pencil cell small , pencil cell medium , tag small , tag large , scissors medium size , stamp pad , clip board , scale steel , chalk all colours , do envelopes , rubber band , cd cover , steel pocker , dusting cloth , register big , drawing pin , double tape , gun taker large stapler , pin of gun taker , lamination paper a4 100 , scale 2 ft , cutting plier , hard sheet white , marking tape , hammer small ) /bid number : gem/2026/b/7584837 * /dated: 25-05-2026 & & / bid document 1 / 59
Tender For supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp
Tender For corrigendum : supply of instruments for vats (video assisted thoracic surgery) - trocar,size11mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size6mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size11mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size13mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size6mm, trocar with blunt tip, with 45 luer-lock connection for insufflations, 11mm, working length 8.5cm, parenchymal forceps, atraumatic, straight jaws, single action jaws, size 5mm, length 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, lung forceps, dismantling, atraumatic, curved jaws, fenestrated single-action jaws in 5mm 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, parenchymal forceps, atraumatic, double curved jaws, size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung forceps, atraumatic, fenestrated, single curved jaws ,size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung nodule forceps, atraumatic, fenestrated, curved jaws, single action jaws, size 5 mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, grasping forceps, cobra-jaws, 1x2teeth, straight jaws, single action jaws, size5mm, length 28cm, consisting of: metal handle with 4 locking positions outer tube with working insert, clickline parenchymal forceps, atraumatic, dismantling, without connector pin for unipolar coagulation, single action jaws, single curved jaws, size 5 mm, length 28 cm, consisting of: metal handle along with outer sheath with forceps insert, for use with linear staplers., grasping forceps, rotating, with connectorpinforunipolarcoagulation,size5mm,length30 cm, atraumatic, fenestrated, curved, single action jaws, consisting of plastic handle, without ratchet, with larger contact area, outer tube insulated & insert, kelly dissecting and grasping forceps dismantling, curved jaws, double action jaws, size 5mm, length 28 cm, consisting of: metal y-handle, with absorber1 geometry, axial, with 4 locking positions, outer tube with forceps insert, scissors insulated, straight jaws, curved scissor-blades, double action jaws, size5mm ,length 28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, curved scissor-blades, scissor blades open horizontally to angulation, double action jaws, size5mm, length28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, straight scissor-blades, scissor blades open parallelly to angulation, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, biopsy forceps, insulated, distally angled outer sheath, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, suction-coagulation cannula, with connector pin for unipolar coagulation with handle,size5 mm, length 28-30 cm in both distally angled sheath and straight sheath option, coagulating and dissecting electrode, l-shaped, insulated, with connector pin for unipo