Latest trench cutter Tenders | Government trench cutter Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45032619

28 May, 2026 35.99 Lacs

Ujjain - Madhya Pradesh

Tender For purchase of departmental building material financial year 2026-27 - brick second class, course sand, fine sand narmada sand, 20 mm metal, stone sand manufacture, 40 mm metal machine brocken, 40 mm hand brocken, 10 mm metal, 6mm metal, 40mm cut stone of requaired, neemach stone 25 to 30 mm, neemach stone 30 to 40 mm, moorum hard and soft, bolder 50 to 100 mm, bolder 150 mm to 200 mm, aren, stone dust, emulsion mix material 4% with damar, hot mix material 4 % with damar, bitumen drum, emulsion cold bitumen drum, cement ( ultratech , j.k , a.c.c , ambuja birla) per 50 kg beg, g.s.b material, n.p 2 cement pipe 300 mm, n.p. 2 cement pipe 600 mm, n.p. 3 cement pipe 300 mm, n.p. 3 cement pipe 600 mm, fire wood

corporations/Associations/Others

CTN :45285785

29 May, 2026 NA

Pune - Maharashtra

Tender For auction sale of u/s plastic scrap,u/s mix metal scrap (rusty only),u/s cartoon box scrap,u/s ms drum open/close mouth sort and sizes,u/s mill board scrap,u/s mild steel carrier/painted boxes,u/s xerox machine

Central Government/Public Sector

CTN :45135300

15 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap condemn m s & c.i. mix lhb parts control arm with/without silent block central buffer coupler, cbc hingh lock, non balance draft gear coupler, bolster centring disk, battery box door,cbc spindle with/without elistomerrik pad and intermediate plate, brake caliper parts, bump stoper, traction center, silent block link, anti roll bar bearing/bush/cover, anti roll bar bracket and central buffer coupler all parts , anti roll bar, and brack disc, anti roll bar bracket, anchor link , center pivot sleave , protecetive tube, eqalizing stay, lhb/icf bogie parts, traction rod, shims packing, bogie load testing machine m s parts, old used and unservicable.loading by moc & manual loading will be allowed. total lot qty. - 28 mt, mode of delivery in weight. bidder may visit the lot before participating.(m. s. approx 89.2% and c.i. approx 10% & rubber and plastic approx 0.8%) ) loading shall be start from rcc road side without any sorting. custodian - sse scrap bvp, location - : bg workshop near paint drum lot. as is where is basis, loading by purchaser, fdp 50 days.

Central Government/Public Sector

CTN :45074667

29 Jun, 2026 NA

Multi City - Multi State

Tender For sale of bauer make trench cutter

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

corporations/Associations/Others

CTN :44847222

23 Apr, 2026 NA

Multi City - Multi State

Tender For auction sale of wheel drum (rim mt),woollen rags,alluminium scrap,gen set all type,gen set 35 kva,gen set 11 kva with tlr,gen set 5.6 kva with tlr,jack lifting all type,water pump all type,cable all type,tube inner all type,mt scrap (rod spring),mt scrap,mt scrap (crank shaft, axle & misc),mt scrap (driver seat),mfm (mixed ferrous metal),fire ext all type,mmm (mixed mild metal),rim mt (wheel drum),pumping set,photocopier machine,helmet steel (bpp),helmet all types,e- waste computer scrap,bty all types,coir mattress,rubber scrap (boot ri),rubber scrap,bag sleeping comp,tex mix,mfm (bin steel)

corporations/Associations/Others

CTN :44762675

15 Apr, 2026 NA

Multi City - Multi State

Tender For auction sale of mfm (mixed ferrous metal),mmm (mixed mild metal),mt scrap,mt scrap (fly wheel),mt scrap (pressure plate,mt scrap (pressure plate),photocopier machine,plastic scrap,plastic scrap (fire retardant),rubber scrap,wheel drum (rim mt),woollen rags,alluminium scrap,gen set all type,gen set 35 kva,gen set 11 kva with tlr,gen set 5.6 kva with tlr,jack lifting all type,water pump all type,cable all type,tube inner all type,mt scrap (rod spring),mt scrap (crank shaft, axle & misc),mt scrap (driver seat),fire ext all type,rim mt (wheel drum),pumping set,helmet steel (bpp),helmet all types,e- waste computer scrap,bty all types,coir mattress,rubber scrap (boot ri),bag sleeping comp,tex mix,mfm (bin steel)

Trench Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others