Latest tri square Tenders | Government tri square Tenders

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

corporations/Associations/Others

CTN :45084592

11 Jun, 2026 4.83 Lacs

Bardhaman - West Bengal

Tender For bid to ras supply of tool and plants for tgandaux c c - digital vernier calliper having external measurement range mm 0 300 and least count resolution 0 01 millimeter make mitutoyo or equivalent , vernier calipers range 0 to 200 mm make mitutoyo or equivalent , telescopic gauge set upto 150 mm make mitutoyo or equivalent , heavy duty portable magnetic drill machine drilling diameter upto 32 mm 1600 w make ralli wolf bosch or equivalent , dial guage range 0 to 10mm makemitutoyo or equivalent , ss 304 90deg long elbow r 1 5d seamless size 250 nb sch 40 bw ends thickness 9 27mm , slip gauge block set 100 pieces make mitutoyo or equivalent

CTN :45328819

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : equipment items - dual output regulated dc variable power supply-input voltage : 230v/50 hz ac.output voltage : (0-30)v dc.output current : (0-2)a.dcprotection circuit : over voltage, over current and short circuit protection.high efficiency : greater than 85 %.low ripple and noise less than 50 mv.digital display, digital ic trainer kit with breadboard:+5v dc, 1 a regulated power supply. 12v dc / 15v dc, 200 ma regulated power supply.solderless breadboard with minimum 840 tie- points, power distribution buses.zif(zero insertion force)ic sockets to accommodated 8 or 16 pin ics.logic input and output leds for output monitoring.16 buffered led outputs.16 debounced switch inputsvariable clock generator: 0.5 hz to 50 hz.single pulse output : 100 ms(buffered,positive and negative outputs).one seven-segment display with 4 bcd inputs.built-in logic switches.manual clock: debounced push-button(one pulse per press)., digital storage oscilloscope-bandwidth: 50-100 mhz. sampling rate: 1gs/sec.channels: 2 (minimum). power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface. c 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf accessories:2 xpassive probes (1x/10x), pcb prototype machine :manual software : copper cam & mach3 mill.resolution (x/y) : 3.125 micrometre.working area(x/y/z) : 200 x 300 x 120 mm.minimum width line and space : 0.1 mm (4 mil).maximum travel speed : 58 mm/sec(2.28 ).drilling range: 0.2 3.175 mm(8-125 mil).maximum drilling cycles : 50 cycles/minmain axle power rating : 300w.main axle rotating speed : 25000 rpm.maximum working speed : 3500 mm/min.feeding height: 120 mm.working drive : 0.02 0.05 mm.repositioning accuracy : 0.01 0.02 mm.supported formats : standard gerber, dxf, excellon.capability of processing various materials:fr4, copper clad, acrylic, metal, aluminium etc.power supply : 230v ac

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45475065

18 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For procurement and installation of ece lab equipments - procurement and installation of ece lab equipments, single output variable dc rpsu single output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, dual output variable dc rpsudual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0 30v)dc- output current: (0 2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv, function generatorfrequency range: 0.1 hz to 2 mhz.display: 4 to 6 digit led displayoutput waveforms: sine, triangle, square, pulse, ramp.amplitude: 0 20 vp-p.rise time: 100 ns.distortion: 1% (within acceptable range of frequencies).power supply: ac 220 v 10%, 50-60 hzoutput amplifier protection: protected against short circuit and 15v overload, digital storage oscilloscopebandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v 240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div 10 v/div (at input)waveform math: +, -, x , , invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions, digital vo;tmeterdc voltmeter digital 3 digit display (0-100 v), 0.5 % accuracy (class 0.5 equivalent) (2000), digital ammeterdc ammeter digital 3 digit display (0-2 a), 0.5 % accuracy (class 0.5 equivalent) (1500), eliminator transformer (stepdown)input - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, embedded lpc 2148 kit cpu - lpc2148, core - 16/32 bit arm7dmi-s speed - max 60 mhz, flash - 512kb, ram (on-chip) - 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm &watchdog two uarts (16c550), two i2c (400kb/s), two spi s eight bit digital output, eight bit digital input, 16 x 2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connectorand usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board example programs in embedded c and assembly with documentation (soft copy) power chord, user manual with cd/dvd, free demonstration after delivery, single phase induction motorsingle phase induction motor, 230v ac, 50hz supply.power rating 1 hp (0.75 kw).speed 1440 rpm.capacitor start/run type suitable for lab useloading setup portable ammeter and digital tactometer contact type, single phase autotransformerinput - single-phase, 230v/240v, 50 hz, 4a, ac output - 0 to 270vac, class "h" or class f insulation., lvdt trainer kitac mains power supply : 230v 10%, 50hzfixed regulated dc power supply : +5v, 12v /500matransducer : lvdtlvdt displacement : 20mm (40mm total)displacement scale : linear 20mmdisplacement display (mm) : red color 3 digit led displayexcitation frequency : 4khzexcitation voltage : ac variable 5v, strain guage trainer kitmetal foil strain gauge mounted on beam/cantileverstrain measurement under applied loadwheatstone bridge arrangementsignal conditioning and amplification circuitinstrumentation amplifiers, 3 digit display of strain / output voltagezero and gain adjustment controlsprovision for applying calibrated loadsregulated power supply, 230 v ac, 50 hztable-top tr

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45154800

09 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set , ark welding set 200 amp with 20 mtr cable and holder complete , air gun with spring type pipe , air impect gun heavy duty , alien key 03 mm 10 mm , bench vice heavy duty , battery charger c 12 72 , battery load tester , boost cable , centre punch 6 inch , circlip plier inner heavy duty , circlip plier outer heavy duty , cold flat chisel 6 , combination plier , complete mechanic tool box steel three fold with tools , copper welding cable , crash helmat , dah with handle , de spanner set 06 pic 8x9 to 18x19 , de spanner set 12 pic 8x9 to 30x22 , diesel spray gun , digital multimeter , drill bit set , electronic welding screen , eletrode holder , envil 100 kg , file flat bustard with handle 12 , fire extinguisher half kg , first aid box , foot pump electric , gear box trolly jack , goggles for motor cycle , grease gun bucket 20 kg air operated pneumatic , hammer ball pen 2 lbs with handle , hand drill machine , hand gloves leather , hand grinder , hexa frame , hub puller heavy vehicle , hydraulic jack 5 ton , hydrolic trolly jack 03 ton , hydrolic trolly jack 10 ton , hydrometer , hydrualic press hand oprated small , impact screw driver , inspection lamp with 5 mtrs wire and clip , iron trey 24 inch x 18 inch x 3inch with handle , iron trey 36 inch x 24 inch x 3 inch with handle , mechanic trolly creeper , oil cane 250ml , oil filter openner multy purpose , pad lock with key , paint spray gun , pick axe 4 5 lbs , pipe wrench 16 inch , plier adjustable , plug spanner mpfi , piston ring compressor , screw driver 10 inch , screw driver 6 inch , screw driver philips 6 inch , shawel , socket spanner 6mm to 14mm with complete ) /bid number : gem/2026/b/7526987 * /dated: 11-05-2026 & & / bid document 1 / 104 shawel , socket spanner 6mm to 14mm with complete attechment , socket spanner hexagonal 8mm to 32mm , soldring iron 125w heavy duty , soldring paste 50 grm pack , soldring wire 08 mm 50gm pack , spanner adjustable 8 , tool box steel two fold , torque wrench 250 lbs , torque wrench 3 mkg to 7 mkg , tubeless tyre puncture kit , tyre pressure gauge , tyre inflating hose , tyre lever heavy duty taparia , vaccum cleaner big size nt 70 2 , valve die , water thermameter digital , welding hand safety gloves leather , alien key 17mm , adjustable wrench 300 mm , cold flat chisel 19 mm , cold flat chisel 17mm , file square with handle 6 , file flat bustard with handle 6 , file flat round smooth handle 6 , file flat bustard with handle 10 , fire extinguisher 2 kg , fuel funnel small , fuel funnel big , filler gauge , grinder stone 4 , hand grinder elerical , measurement 200 ml , measurement 250 ml , measurement 500 ml , measurement 1 ltr , measurement 2 ltr , measurement 5 ltr , nose plier 6 , pipe wrench 10 inch , piston ring compressor big , piston ring compressor small , piston ring expender heavy veh , piston ring expender light veh , rottery pump , ring spanner 6x7 to 30x32 , screw driver 8 inch , screw driver 4 inch , screw driver philips 8 inch , screw driver philips 4 inch , screw driver combination kit , scissor 8 , steel foot rule 12 , spark plug spanner 21 no , tong 16 inch sandasi , tool box steel three fold , trolly for carring engine assy jib crane hv vehicle , tyre inflator machine heavy vehicle with accessories , tyre inflating hose with nozzle air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set, ark welding set 200 amp with 20 mtr cable and holder complete, air gun with spring type pipe, air impect gun heavy duty, alien key 03 mm 10 mm, bench vice heavy duty , battery charger c 12 72, battery load tester , boost cable , centre punch 6 inch, circlip plier inner heavy duty, circlip plier outer heavy duty, cold flat chisel 6, combination plier , complete mechanic tool box steel three fold with tools, copper welding cable , crash helmat, dah with handle, de spanner set 06 pic 8x9 to 18x19, de sp

CTN :45471460

29 Jun, 2026 NA

Agra - Uttar Pradesh

Tender For supply of safety message board safety notice board , stretcher , first aid box , fire prevention kit , flashback arrestor , notice board leather , wire brush , jump suit , leather hand gloves , sand buckets , fire extinguishers , reflective jackets , safety shoes , ear plugs , insulated rubber gloves , leather apron , safety goggles , helmet , head shield , miniature circuit breaker mcb , earth leakage circuit breaker , ev electrical panel trainer kit , spv module above 400 wp , ongrid inverter 1.5 to 2 kva , mounting structure in two tables , battery 12v 75 ah , battery stand , battery interconnection wires and lugs , solar irradiation meter , mc 4 series connectors , mc 4 parallel connectors branch , solar grade dc cable 4 sq mm , green yellow earthing wire 6 sq. mm , cable ties uv protected 50 and 100 mm , acdb , dcdb 3 in 3 out with spd , solar panel 75 w 12 v , charge controler 12 v 5 a , battery 12v to 20ah , led bulb 5 w , solar lantern 5 to 10w , connecting wires 10 mtr , mechanical fixtures required for panel installatioset , ac wire 3 core acdb to inverter , ac 3 core cable 2.5 sq. mm , screw and pvc buffer for mounting acdb and dcdb , petroleum jelly for battery terminal small , water level tube with holder , sprit level magnetic base , inclinometer magnetic base , 30-meter fiber tape , hammer screw driver , tri square 8 inches , metal measuring tape with level 5 m , self adjusting wire stripping pliers 1.5 6 sqmm , 30 meter lne three wire extension wire , flat and ring spanner set , torque wrench with adopter , ball pin hammer , digital multimeter , digital ac and dc clamp meter , crimping tool 0.5 sqmm to 16sqmm , hammer drill machine 13mm 550watt , set of drill bit for concrete , set of hss drill bit for metal , cutting wheel and grinding wheel , hot gun gas electric operated for sleeves , pair of solar mc 4 connector wrench tools , hydrometer , battery load tester , digital earth tester , cable insulation tester megger , hand gloves pvc gloves and cotton gloves , safety jacket pvc coated and reflective , safety full body harness , anti-slip safety shoes , safety goggles spectacles goggles , head helmet hard hat , anchor lifeline , safety static rope 9.0 mm , first aid kit , clamp meter , electrical drill , lead solder , soldering iron with lead and stand , spanner set , tds meter , water pressure gauge , water purifier , screw driver set , soldering flux , adhesive , automatic washing machine , brazing rod , digital thermometer , single and double door refrigerator

CTN :45401502

16 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for metrology and measurements lab and machine tools technology lab for mech department. - digital vernier caliper* measuring range: 0 200 mm * least count / resolution: 0.01 mm * accuracy: 0.02 mm * material: hardened stainless steel * measurement: outside, inside, and depth measurement * display: digital lcd * power supply: battery operated * protection: ip54 or better * make: reputed brand such as mitutoyo / insize / baker or equivalent, digital micrometer* measuring range: 0 25 mm * least count / resolution: 0.001 mm * accuracy: 0.002 mm * measuring faces: carbide tipped * display: digital lcd * repeatability: 0.001 mm * protection: ip54 or better * power supply: battery operated * material: hardened stainless steel frame* make: reputed brand such as mitutoyo / insize / baker or equivalent

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

Tri Square Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others