Latest tricolor light Tenders | Government tricolor light Tenders

CTN :43617837

27 Jan, 2026 1.65 Crore

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of prefab hut of size 6.10 m x 7.32 m , non skid tile 300 mm x 300 mm , tile 600 mm x 600 mm , chequered tiles 300 mm x 300 mm , wall tiles 200 mm x 300 mm , white cement , chicken wire mesh , tiles adhesive , distemper , paint , red oxide , nails , paint brush , wc indian type , wc western type , wash basin , urinal , cgi sheets 12 ft , cgi sheets 8 ft , pgi sheets for ridge , upvc door with frame 7.0 ft x 3.25 ft , upvc door with frame 3 ft x 6.50 ft , upvc window with frame 4 ft by 4 ft , column post with ms plate rectangular hollow section , wall panel for shelter 8ft by 6ft , purline rectangular hollow section , ceiling angle t and l type 1point 5 inch , gypsum tiles , pedastal fan , end post , ceiling fan 1400 mm , solar street light , white cement , wall primer , wall putty , exterior wall paint , planks , water proof plywood , hard wood , hard wood 4 inch by 4 inch by 10 ft , paint brush 4 inch , paint brush 2inch , paint brush 1inch , roller brush , gi nipple 1.50inch x 4inch long , gi nipple 1.50inch x 8inch long , gi nipple 1.50inch x 12inch long , gi tank nipple 1.50inch , gi socket 1.50 inch , gi elbow 1.50 inch , gi union socket 1.50 inch , gi tee 1.50 inch , gate valve 1.50 inch , gi socket 2inch , gi elbow 2inch , gi reducer tee 2 inch x 1.50inch , ss gate valve 2inch , gi nipple 2inchx 12inch long , gi union socket 2inch , gi union socket 3 inch , gi socket 3 inch , gi tee 3inch , gi reducer tee 3inch x 2 inch , gate valve 3 inch , gi flange 3 inch , gi elbow 3 inch , gi nipple 3inch x 12 inchlong , gi bend 3inch- 45 degree , gi pipe 3 inch 6 mtr long , tylon tape thread seal tape , ms square pipe 50mm x50 mm x3 mm and 6 m long , ms pipe 100 mm , base plate 200 mm x 200 mm x10 mm , nut and bolt for truss connection m20 , 50 mm long , foundation bolt 18 mm dia , 450 mm long , welding rod 3.15 mm , ppgi sheet 14 ft x 3 ft , ppgi ridge 8ft x 18 inch , sds screw , red oxide , power float , screed vibrator with honda gx35 engine , concrete edger , diesel water pump 10 hp , heavy duty suction hose green pipe 4 inch dia , combined drying and mixing unit , heavy duty hose green pipe 2inch dia , thermoplastic paint , glass beads , solar light with 6 mtr height pole with com set , solar power cat eyes studs led light , metal road delinators 600 mm , road sign board informatory l turn with com set , road sign board informatory r turn with com set , road sign board steep gradient with com set , informatory sign board set 4ft x 3inch //bid details 2 / 72

Central Government/Public Sector

CTN :43563475

23 Jan, 2026 NA

Dakshina Kannada - Karnataka

Tender For supply of vinyl board with foam no drugs , flex hindi diwas 6x4 , coastal clean-up standee 6 x 4 , coastal clean-up flex 4 x 5 with fixing , coastal clean-up flex 10 x 8 with fixing charges , tree plantation flex 6 x 8 , parking numbering in acrylic kunjatbail , caring for mind and eyes flex banner , tatrakshak backlight board near entry gate with fitting , mess foam with vinle laminate 3 x 2 with fitting charges , mess foam with vynyl 5 x 2 , mi room photo print with laminate 6 x 8 , mi room photo print with laminate 8 x 12 , metal tallies , kunjatbail stickers uv print and pasting 4 x 3 , comdis foam board 4 x 3 , comdis foam board , photo print 8 x 12 , pouch with id cards , red zone orange zone stickers , inaugration board 2x1 , equipment state board vynil with lamination , vehicle section vynil with lamination , eric board vynil with lamination , opdef vinyl with lamination , dhq entrance glass logo stickers , uv vynil cctv section , nion led boards for mess , caring mind flex , photo framing for certificates , name tallies , dhq 3 entrance glow boards , banner with frame 5 x 4 recruitment , office name tallies , mi room board with led light , providing and fixing illuminated backlit led , providing and fixing stainless steel 3d lasercut letters , providing and fixing contourcut acrylic led backlit signage , wallmounted 3d lasercut stainlesssteel and acrylic signage , exterior wall mural thematic depicting coast guard operations ) /bid number : gem/2025/b/6983213 * /dated: 13-01-2026 & & / bid document 1 / 37

Central Government/Public Sector

CTN :43592450

20 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For supply and application of one rake set epoxy pu paints for ac-ac emu rake (12 car formation) coaches (drg no.(790) emu/us/dmc/ac-8-3-001),alt nil. as detailed below : 1.adhesion promoting primer (app) as per -mdts-48279-rev-04,amd-01-840 ltrs. 2.two component p.u surfacer to specification rdso/m&c/pcn/100/2018, chapter-iv -360 ltrs. 3.pu thinner compatible with pu paint system offered -20 ltrs 4.thinner compatible for unsaturated polyster base kniffing putty,p.u surfacer and p.u gloss enamel finishing paint to specification rdso/m&c/pcn/100/2018, chapter-iii,iv,v-480 ltrs. 5.full gloss polyurethane enamel (two pack) exterior finishing paint to specification rdso/m&c/pcn/100/2018, chapter-v colour :pu pearl light grey ral- 9022 (metallic finish)-540 ltrs. 6.full gloss polyurethane enamel (two pack) exterior finishing paint to specification rdso/m&c/pcn /100 / 2018,chapter-v colour :pu signal blue ral-5005 (metallic finish)-420 ltrs. [ warranty period: 30 months after the date of delivery ]

CTN :43383012

20 Jan, 2026 NA

Parganas - West Bengal

Tender For corrigendum : supply of maint items d d---stainless steel shelf rack (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , towel rail / ring for bathroom (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , led street light 250w make philips,wipro,surya,panasonic, halonix, bajaj,orient , ply wood bwr 8ftx4ftx12mm make kitply, century, green ply, archid ply, sylvan , pvc flexible pipe 32mm dia 20 mtr roll make best quality , pvc bath room cabinet mirror 35 x 45 cm make prima, xen, prayag and jaynam , looking mirror with ac or ply wood 450 x 600 mm make prayag, xen, prima, jaynam , particle board one side teak face exterior grade 8ftx4ftx12mm thick make kitply, century, green ply, archid ply, sylvan , ply wood bwr 8ftxftx6mm make kitply, century, green ply, archid ply, sylvan , casing caping pvc 20mm full length make best quality , gm spindle for ci sluice value 100mm make best quality isi mark , fully automatic star delta starter 10 hp make legrand and panasonic , casing caping pvc 1 by 2 inch make best quality , fuse wire copper tinned 150 amp make best quality isi mark , pvc conduit pipe 25mm dia make best quality , battery 12v, 180 ah make eveready, exide and amaron , flexible wire twin core 1 sqmm make kei, havells, plaza, gloster ) /bid number: gem/2025/b/7027097 * /dated: 30-12-2025 & & / bid document1 / 31

CTN :43321717

20 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of neoprene rubber 1/8 , neoprene rubber 5/16 (8mm) , jointing oil proff , henley compound yellow , neoprene rubber sheet 2mx1mx6mm , wear resistant putty , under water repair compound , ss repair compound , net grip alum (male/femal) , nail copper 25x2.5mm , sealing compound rdl 840 , alluminum alloy sheet 2400x1200x2.0mm , alu alloy sheet 3500x1200x6.3mm , steel bar round stainless 1 dia 18% chromimun 2% nickel , brass welding rod (6.30mm) 57.63% of copper , rod welding brass 57.63% of copper dia 5.00mm , paint rfu priming red oxide of fe & zn chromate syn. brushing , paint, rfu, priming aluminum, water resistant, brushing /spray , paint rfu finishing exterior syn. grey admirality light , distemper white , paint rfu finishing exterior synthetic brush/painting dagrey , high performance putty (pack 1 kg) , paint rfu, air drying (brushing/spraying) azure blue-isc-104

Central Government And Public Sector

CTN :43462443

27 Jan, 2026 45.19 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gum boot pvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis

CTN :43419551

28 Jan, 2026 50.00 Lacs

Yamunanagar - Haryana

Tender For tender for lab reagents/articles and material. - 10% ferric chloride reagent. 250ml (should be usfda/icmr approved/european ce marked /ivd approved), 10% koh 500 gm (should be usfda/icmr approved/european ce marked /ivd approved), 100 well micro tube storage box (for storage of 2.0ml micro tubes or cryogenic vials autoclavable at 121 c 100 wells well dia 1.23 cm dimensions 5.6 x 6 x 2.2 inch 5 pcs per box ), 2ml mct vial (sterile) (high-clarity polypropylene graduated in 0.25ml increments easy-open caps with needle insertion spot and textured marking area labeling area on tube exterior highly polished interior for maximum sample recovery autoclavable at 121 c/15psi for 15 minutes nonpyrogenic fit all standard rotors500 per pack), 8 channel variable volume micropipette 2-20 ul (manually operated pipetting type -air cushion ultra light weight spring loaded tip cone for minimal tip attachment forces. soft eject low tip ejection force fully autoclavable should include calibration certificate from manufacture large 4 digit volume display load multi -channel tips quickly and securely without a need for rocking. extremely consistent sample pickup across all channels), 96 well reversible rack for 0.5 to 2.0 ml vials (wells are arranged in standard 8 x 12 array alphanumeric identification autoclavable wells: 96 rack measures: 9.60"l x 4.70"w x 2.00"h (246mm x 121mm x 50mm) tubes: 0.5 ml - well dia.: 7.6mm tubes:1.5/2ml - well dia.: 11mm), abg reagent pack, absorbent filter paper for shelf 1 to 100, acetic acid. glacial 500 ml (should be usfda/icmr approved/european ce marked /ivd approved.), acetic acid. glacial 500 ml (should be usfda/icmr approved/european ce marked /ivd approved.), acetone 2.5 lit (should be usfda/icmr approved/european ce marked /ivd approved.), acetone 500 ml pack (nice/rankam/qualigens), acid phenol carbolic 500 gm. (should be usfda/icmr approved/european ce marked /ivd approved.), acid phenol carbolic 500 gm. (should be usfda/icmr approved/european ce marked /ivd approved.), activated charchol 500gm (qualigen/rankem/nice), ada kit 1*96 test (type of sample for test should be serum/plasma should be usfda approved/european ce marked /ivd approved.), afb stain 250ml (should be ivd/ce/iso 13485 certified co), agar agar medium 500 gm (should be usfda/icmr approved/european ce marked /ivd approved.), agar sda 500gm (should be ivd/ce/iso 13485 certified co), agar sda with chloramphenicol 500gm (should be ivd/ce/iso 13485 certified co), ahg 1 x 5ml (tulip), ahg 1x5ml (j mitra/arkray), albert stain (with albert a & albert b both in kit ready to use liquid form) 125 ml (should be usfda/icmr approved/european ce marked /ivd approved), albumin liquid stable test kit 5x50 ml (erba transasia), albumin test kit 100 ml (should be ivd/ce/iso 13485 certified co), alkaline peptone water. 500 gm (should be usfda/icmr approved/european ce marked /ivd approved.), alkaline phosphatase 100 ml (meril/beacon/agd), alkaline phosphatase liquid stable 6x6ml (erba transasia), amikacin antibiotic disc (6 mm) 30 mcg, pack has 5 cartridges of 50 discs with plastic disc dispensor (filter paper disc of size 6mm, impregnated with required potency of antibiotic. should be iso9001/iso 13485 certified and fda/ce approved.), amikacin antibiotic disc (6 mm) 30 mcg, vial contain 100 disc filter paper disc of size 6mm, impregnated with required potency of antibiotic. should be iso9001/iso 13485 certified and fda/ce approved.), amoxicillin - clavulanic acid antibiotic disc (6 mm) 20 / 10 mcg, pack has 5 cartridges of 50 discs with plastic disc dispensor (filter paper disc of size 6mm, impregnated with required potency of antibiotic. should be iso9001/iso 13485 certified and fda/ce approved.), amoxicillin - clavulanic acid antibiotic disc (6 mm) 20 / 10 mcg, vial contain100 disc (filter paper disc of size 6mm, impregnated with required potency of antibiotic. should be iso9001/iso 13485 certified and fda/ce approved.), amoxycillin antibiotic disc (6 mm)

CTN :43345094

19 Jan, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of n8010-p009678 epoxy based primer for application in ballast tank , n8010-007693 h p advanced non skid coating for helo and flight deck , n8010-p009604 black colour tin free spec a f paint for boottop application , n8010-p061977 anti corrosive llps alluminium , n8010-p061944 anti corrosive llps grey bronze , n8010-007509 paint polyurethane grey , n8010-007510 paint polyurethane red , n8010-007507 paint finishing ral 7040 grey , n8010-007508 paint finishing ral 9011 black , n8010-p009545 primer above water exterior for aliminium substrate , n8010-001549 international thinner gta220 , nsn8010-720488222 interthane 900 pine green ral 6028 , n8010-007652 anti corrosive paint fresh water tank , n8010-p009601 tie coat for application of tin free spc a f paints , n8010-009653 anti corrosive paint avgas avcat , n8010-p009679 epoxy based anti corr paint for application in ballast tank , n8010-p009603 red brown darkred tin free spc a f paint for u w application , n8010-p009602 brown light red tin free spc a f paint for u w application , n8010-tb00829 intergrad 269 for mild steel , n8010-007656 anti corrosive paint used for acid store battery ) /bid number: gem/2025/b/6843045 * /dated: 26-12-2025 & & / bid document1 / 19

Central Government/Public Sector

CTN :43217931

26 Jan, 2026 19.90 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of deisgn engineering and supply of electrical instrumentation and civil works : : - design and engineering of imcc panel 2 nos and vfds , design and engineering of apfc and hvac , design and engineering of apfc and field instruments , design and engineering of cables and termination , design and engineering of earthing of imcc , field equipments and soil testing , design and engineering of civil buildings and structure foundations , design and engineering of imcc building with earthing system , design and engineering of structural works for cable laying for both incoming and outgoing cables , design and engineering of lighting system of imcc building , equipment locations at ccr ground floor and along the structural path for cable route , supply of imcc panels , vfd panels , supply of apfc panels , hvac system , supply of mldb lighting distribution boards , lighting material including db , light fittings , and all related accessories or wiring material etc , supply of field instruments and necessary piping materials as required , supply of plc , supply lt cables and other related accessories for electrical , termination material and other instrumentation cables as required , supply of cable trays for electrical and instrumentation , supply of all earthing material as per is 3043 for imcc and connection to earth pits for motors , panels etc , supply of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , erection , testing , commissioning , and handover of equipments of imcc panels and vfd panels , erection , testing , commissioning , and handover of equipments of apfc panels and hvac system , erection , testing , commissioning , and handover of equipments of lighting system as per above supply , erection , testing , commissioning of earthing system , erection , testing , commissioning of field instruments and necessary piping materials etc as required , erection , testing , commissioning and handover of plc , erection , laying , testing and commissioning of lt cables ( cable terminations wherever required along with necessary accessories is in the scope of the contractor) for electrical and instrumentation , erection , testing and commissioning of cable trays for electrical and instrumentation , erection , testing and commissioning of fire detection and alarm system for building and cable alley area along with integration and display at fire station/existing control centre , substructure excavation , foundation works (footings , columns up to plinth level) , dpc (damp proof course) , and backfilling. , superstructure columns , beams , slabs , brickwork/masonry for all floors above plinth level , and formwork up to ground floor , finishes plastering , flooring (tiles , marble) , painting , wall cladding , and other interior/exterior finishes , plumbing works , fixing of doors up to ground floor. , superstructure columns , beams , slabs , brickwork or masonry for all floors above plinth level , and formwork for subsequent floors as per approved design , finishes plastering , flooring (tiles , marble) , painting , wall cladding , and other interior/exterior finishes , plumbing works , fixing of doors for subsequent floors as per approved design , supply and erection of structural works for cable laying for both incoming and outgoing cables

Tricolor Light Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector