Web Analytics Made Easy - StatCounter

Tripping Coil Tenders

Get complete information related to latest Tripping Coil Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Tripping Coil Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Tripping Coil Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government / Public Sector

CTN :45736551 Due date: 16 Jul, 202616 Jul, 2026 NA
Tender For supply of electromagnetic disk brake coil for eot crane range up to 14kgm torque operating condition coil supply voltage 440vac ac distributed designed (+/-10%) &frequency 50hz (plus or minus5 percent)voltage 440vac 3phase brake coil for disk bake 150em disk brake &150xem disk brake 190em diskbrake &190xem disk brake 235em disk brake &235xem disk brake. note: sample to be got approved before bulk supply ]

CTN :45324747 Due date: 07 Jul, 202607 Jul, 2026 16.80 Lacs
Tender For corrigendum : supply of spares for dust suppression system for coal stock pile and conveyer system in chp, katpp, jhalawar - "solenoid valve50 nb, normally closed, 2in g/bsp pl, body moc- gorged brass,type_2/2-floating diagram, orifice(mm)-45. voltage -230v-240v,50hz, ,epoxy moulded coil with ip-65, coil class-h" , "solenoid coil with connector type anx voltage 230v w9,ed: 100%" , "solenoid valve 1/2 inch, normally close, cf8m,05-10 atm, ss316,operating operating voltage: 110v,50hz" , "solenoid valve 3/4 inch, normally close, 05-10 atm, ss316,operating operating voltage: 110v,50hz" , "solenoid valve 1 inch, normally close, 05-10 atm, ss316,operating operating voltage: 110v,50hz" , "coil for item sr no 3,4,5 (03 nos for each type)" , "pressure switch (adjustable-0 to 21 kg/cm2" , control transformer 1.5kva, primary :-380-400-415-440vac, sec.:-110vac , "control transformer 750va, primary :-380-400-415-440vac, sec.:-110vac" , "aux. contactor 4no+2nc ,110vac with 2nc addon blocks,110vac coil voltage" , "aux. contactor (o/e/n 58-24-c relay) 04no,12a, 24vdc" , aux. contactor with 3no+1nc,12a, 110vdc coil voltage , mpcb 2.2-3.2a, 50ka , power contractor 45a,tp,110vac coil voltage , power contractor 170a,tp,110vac coil , over load relay range:28-40a , over load relay range:85-135a , selector switch 4pole,2way,6a , auto/ manual selector switch 3p, 4way with off , on delay timer with 2no,2nc, coil voltage -110vac , 6" panel heavy duty exhaust fan,240vac , steel panel lock knob type ktisn - black and silver finish,22.5mm dia, round shape

CTN :45706414 Due date: 18 Jul, 202618 Jul, 2026 NA
Tender For supply of pvc wire in coil pvc insulated - 0.75mm, 1 coil - 90mtr , pvc wire in coil pvc insulated - 1.0mm, 1 coil - 90mtr , electro magn. relay, coil - 24 vdc , 5 amp, 8 pin , circular, 2 co , relay base 8 pin, circular , auxilary contacts part for contactor, no- ta1-dn22 , auxilary contacts part for contactor, no- ta1-dn20 , contact element 1 no, part no- rb2-be-101 ,240v ,10a , contact element 1 nc, part no- rb2-be-102 ,240v ,10a , 4 pole contactor with ac operating coil, 230 vac ,3 no 1 nc ,10a , selector switch, 3 position part no- rb2-bd3, standard handle , flush push button spring return - green, part no- rb2- ba3, size dia-22 , flush push button spring return - red, part no- rb2-ba4, size dia-22 , proximity sensor capacitive, pnp part no- xt230a1pal2 24 v dc, range 0-10mm , proximity sensor capacitive, npn part no- xt230a1nal2 24 v dc,range 0-10mm , proximity sensor inductive, pnp part no - xs112b3pam12 pnp, 24 v dc, range 0-10mm , proximity sensor inductive, npn part no - xs112blpnal2 npn, 24 v dc, range 0-10mm , proximity sensor optical, pnp, 24 v dc, range 0- 300mm , proximity sensor optical, npn, 24 v dc, range 0-300mm , a1d1x timer, 30 min a1d1-a csa on delay 24-230v coil , a1d1x timer, 60 min a1d1-a csa on delay 24-230v coil , digital multimeter , screw driver , 12inch insulated size- 12 inch insulated , screw driver set, with 5 blades and poker , 12 way connector channel, 30a, 500v , batten holder angle type, 6a,240v , combinational plier, insulated size 8inch , wire striper , part no- 150b , neon teaster , 230v ac , bulb , 230 v ac 5watt , dp switch with neon , 32a 240 v , 3pin plug top , 6a 240 v , roller type limit switch , plunger type limit switch , lever limit switch , emmergency stop switch key to release, dia 22 holder , soldering iron , soldron ,230v ac, 25w , mcb 6 amp, 6 amp, dp , mcb 16 amp, 16 amp,dp , mcb 32 amp, 32 amp,dp , hrc fuse, 5 amp , glass fuse, 500 m amp , glass fuse, 1 amp , glass fuse, 200 mamp , glass fuse, 100 m amp , type 3 spd adapter voltage protection , type 2 ac surge protection device , multifunction meter with modbus rtu communication rs485 , 15 functions, wide time range, universal power supply, 600dt , temperature controller pid with modbus rtu communication , multifunction meter with modbus rtu communication , smart 7kt, multifunction meter , cp card for s7 1200, cm 1241 6es7 2411ch30 1xbo

CTN :45712476 Due date: 20 Jul, 202620 Jul, 2026 NA
Tender For supply of 2 ton capacity 5 star rated unitary window ac, operating voltage 230v ac, variable inverter type, cooling only, 100% copper coil, eco friendly refrigerant conforming to bis specification no. is 1391 (part - 1) 2017 (reaffirmed 2022) as per dy.cege/grc's specification no. cee/s/185/519/genl. dt. 04.11.2022 [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45706633 Due date: 11 Jul, 202611 Jul, 2026 NA
Tender For tripping coil for ge make m-pact circuit breaker , closing coil for ge make m-pact circuit breaker , breaker limit switch for ge make m-pact circuit breaker , male female jaw for ge make m-pact circuit breaker

Central Government And Public Sector

CTN :45727605 Due date: 28 Jul, 202628 Jul, 2026 NA
Tender For heavy duty circular magnet with following specification 1. application- circular lifting magnet suitable for lifting cold as well as hot ferrous material up to 600?c in a foundry environment 2. operating voltage-220vdc 3. cold current- max.105 amps 4. cold power- min. 18.5 kw 5. self weight- total self-weight of the magnet shall not exceed 5 tons, inclusive of suspension chain, master bail, lugs, pins, and all other accessories 6. duty cycle- min 50% at a 10-minute cycle 7. magnet diameter- 1650 mm with tolerance of -25.5 mm/+50 mm 8. minimum lifting capacities- the lifting capacities of the magnet shall not be less than the following: a) pig iron (1 hm)-2359 kg, b) pig iron (2 broken)-1225 to 1497 kg, c) steel turnings-771 kg 9. magnet conductor & insulation- magnet conductor shall be made of premium electrical-grade copper, minimum copper purity shall be 99.99%, coil insulation shall be class "h" 10. magnet body construction- the magnet shall be made of high-grade cast steel, of welded construction, and shall be waterproof and mechanically robust, suitable for heavy-duty foundry applications 11. bottom plate & sealing plate- a)heavy duty non-magnetic bottom plate and sealing plate shall be provided,b) material shall be wear-resistant, work-hardened manganese steel, c)plates shall protect the coil from damage due to impact, abrasion, and bumping 12. suspension chain assembly- a)heavy duty, annealed alloy steel, 3-legged chain shall be provided, b)chain shall be complete with a master bail suitable for crane hook suspension. heavy-duty lugs & pins shall be provided toconnect the chain to the magnet 14. surge protection? a suitably rated surge suppressor shall in the magnet circuit 15. testing & test certificates? all relevant tests and test certificates shall be submitted along with the supply. specn: 1. cold current: max 105amps, 2. cold power: 18.5 kw 3. self weight less than 5ton inclusive of chain, bail and other accessories. duty cycle: min. 50% at 10minutes cycle 5. diameter of magnet: 66inches -1 inch +3inch. 6. lifting capacities shall not be less than (a) pig iron1hm - 2359kgs) (b) 2 broken pieces: 1225 (c) steel turnings: 771kg ]

State Government

CTN :45709314 Due date: 14 Jul, 202614 Jul, 2026 NA
Tender For supply of vacuum interrupter tripping coil and closing coil at 220 kv ss lalitpur under etd jhansi.

CTN :45676693 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For :purchase of chemistry laboratory equipment for basic engineering department - purchase of chemistry laboratory equipment for basic engineering department, hot plate: top plate material: cast iron ; plate size: minimum 8 inch diameter;power rating: 2000 w ; temperature range: ambient to 200 c minimumthermostatic temperature control: required; power supply: 220 240 v ac, 50 hz, ic regulated battery eliminator: ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., ammeter: dc (0 - 2 amp), voltmeter: dc voltmeter; range 10 v, analog, galvanometer: moving coil type, 30-0-30 scale, unbranded with bhel ; specification-sensitivity 0.143mm/v, water distillation unit: output capacity: 4 litres per hour (lph); ph value: 5.5 to 7.0 ; conductivity (raw water distillation):3.0 4.0 s/cm or less ; glassware material: borosilicate 3.3 glass (pyrex/duran equivalent); heating elements: silica-enclosed quartz heaters or chromium-plated element variants; power supply: 220 240 v ac,50 hz / 60 hz, single phase; automatic water level cut -off, electro analytical balance: load capacity: minimum 500 g; readability: 0.01 g; linearity: 0.02g; display: lcd/led; tare function: required; top pan type; power supply: 220 240 v; ac, 50 hz, electric bunsen burner: electrically operated, energy regulator/ control knob operating temperature 800 c ; body: stainless steel, power supply source: corded, electrically operated; energy regulator/ control knob, operating temperature 800 c ; body: stainless steel, power supply source: corded electric, supplied with a heavy-duty, heat-resistant, electric, supplied with a heavy-duty, heat -resistant, digital balance: weight 500g, accuracy 0.01g, top pan. tare function, caliberation- automatic external display type: led

CTN :45671759 Due date: 01 Jul, 202601 Jul, 2026 55.80 Lacs
Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

State Government

CTN :45694609 Due date: 10 Jul, 202610 Jul, 2026 NA
Tender For supply of high dielectric strength and thermal stability sf 6 gas , mccb 3 pole 100a 3ph 415v of standard make , rotary head assembly for smc make isolator , jumper cone for panther conductor , vibration damper for earth wire 7 3.25 mm , single tension fitting for acsr panther , pg clamp panther to panther conductor , ct shorting strip for 36kv ct made of copper , 145kv isolator blade smc make , spring charging motor suitable for 145kv cgl make sf6 cb , 145kv isolator clamp suitable for genandy make for panther conductor , tripping coil for 245kv sf6 circuit breaker
 Loading, Please wait...

Connect us via What's Up