Latest tripping plate Tenders | Government tripping plate Tenders

Corporations/Associations/Others

CTN :45532288

30 Jun, 2026 15.30 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements ,eb board, play materials and name board works in rajagopal nagar park at ward no.51 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page no.105)

Corporations/Associations/Others

CTN :45532318

30 Jun, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page n

Central Government/Public Sector

CTN :45561580

23 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap m.s melting ie, scrap rail pieces below one mtr long various types rail sections, broken various poundage fish plates, broken joggled fish plate various poundage,scrap glued joint,various types brokrn bolts , redha sleeper fitting, bridge checker plate, bridge bearing plate ,gauge tie plate , cut check rail , m.s st sleeper bend and cut piceses notching rail, bend rail,ms tie bars, plate screw, cut pieces of tung rail and stock rail, conversion material of wooden and psc turnout, slide chairs, bearing plate, wire claw, pan motor, bar straightening ,bucket and all other pway m.s melting fitting material.

Central Government/Public Sector

CTN :45561581

23 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - m s melting scrap, released erc ,released m s liner, scrap rail cut below 1.00 m of different poundage , below 1.00 m g/j pieces, sej chair, t/out slide chair, released 52 kg fish plate, released 1 mtr fish plate, released gauge tie fish plate, release bearing plate, release motor plate, release stretchar bar, all types of pway material etc.

State Government

CTN :45143851

25 Jun, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various precision measuring instruments for tmd at sikka tps. - insize-1118-150b digital vernier calipers, digital vernier calipers size - 0-300 mm mitutoyo make, vernier caliper "mitutoyo" make, size- 0- 300 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 180 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 280 mm, vernier dial 0.00 to 200 mm, dial vernier caliper: size: 300mm (l.c: 0.02mm/0.001) suitable to take inside, outside, depth and step precision measurements. dual reading scale (metric and inch). mfg. from hardened ss and satin finish., dial gauge: 0-5mm model no: 1044a, dial indicator plunger type with back lug suitable for magnetic base, height gauge etc. graduation: 0.01 mm, range: 0 mm - 5 mm, dial reading: 0-100, accuracy: 0.013 mm., extension rod, length 150 mm suitable for mitutoyo make dial indicator plunger, mitutoyo dial indicator 0.01mm to 10mm, dial gauge: 0-30 mm model no: 3052a-19, mitutoyo make dial gauge with magnetic stand: 0-10mm, magnetic stand order 70115, mitutoyo make magnetic stand,701, magnetic stand with flexible column, model:7012-10, magnetic stand model 7033 - 10, make mitutoyo, long stem 1 for mitutoyo make magnetic stand 7010, dia 12 mm bottom connector m8x1.25 length 300 mm, long stem 2for mitutoyo make magnetic stand 7010, dia 10 mm length 500 mm, insize telescopic inspection mirror size 32 mm, 360d rotation 500 mm long, adjustable ss handle, feeler guage 0.03 to 0.5mm (184-302s), make; - mitutoyo, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, feeler gauge: 0.01 - 1 mm, length - 300 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., feeler gauge: 0.01 - 1 mm, length - 600 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., measure tape 3 mtr long, measure tape 5 meter, measure tape 30 meter, freemans make measure tape 15 metre long, digital outside micrometer with large digital display. size: 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size: 25 - 50mm, resolution: 0.0001 mm., mitutoyo make outside micrometer, 0 to 25 mm, 102/217, outside micrometer size - 50-75 mm mitutoya make, outside micrometer size 75-100 mm, outside micrometer 0-150 model 104-135a, mitutoyo make insidemicrometer, range-25 to 50mm, model:141-105, inside micrometer range 50-500 mm lc-0.01mm, mitutoyo make depth micrometer, 00 to 150 mm, 129/116, mitutoyo make depth gauge, range 300 mm,530/119, bore guage 18-35 mm (511 - 701) make: - mitutoyo., bore guage 35-60 mm (511 - 701) make: - mitutoyo., digital bevel protector 150 mm (187-501), make: - mitutoyo, mitutoyo make thread pitch gauge up to 100mm, surface plate, granite as per is 8512-2:1990 size 600x600 mm with stand 755 mm

State Government

CTN :45523335

27 Jun, 2026 5.48 Lacs

Srinagar - Jammu And Kashmir

Tender For supply of consumables for ushp-i, sumbal - monoplast tape roll (11 kv grade) 3mm thick, 3 inch wide, 5 mtr roll, petroleum jelly white, m seal, ci bibcock 1/2", pick axe with wooden handle, 3 mm rubber cord, 4 mm rubber cord, 11 kv link set, m.s welding electrodes 4 mm x 450mm pack of 75 pcs, m.s welding electrodes 3.15 mm x 350mm, pack of 93 pcs, crc 2 - 26 tubes, bush rods lt 12 mm, bush rods lt 19 mm, log sheet for control room, log sheet for tg panel, gauge register, pad lock, 6 lever, broom stick, pvc tape roll (ryb), shellac liquid, 12 w led lamp philips / syska, 25 w led lamp philips / syska, led light 45 watt philips / syska complete, pendent holder 5 a, old sarees / dhoti cloth, cotton waste, hexa blade d/e, insulated plier 8" long (taparia), rustoline, hand gloves rubber, hand gloves 11 kv grade, almunium thimble 300 mm2, almunium thimble 400 mm2, gate valve 1/2" brass, gate valve 3/4" brass, gate valve 1" brass, gi elbow 1/2", gi union 1/2", rubber long shoes, ss combine 16 a, pannel cleaning spray with foam, gland dhori 8 mm, gland dhori 18 mm, champion gas kit 4 mm, champion gas kit 2 mm, shovel medium, heater plate 178 mm, heat coil 1500 / 2000 watt, flexible wire (90 mtr coil), 3 1/2 core al cable, 35 sqmm

CTN :45540400

19 Jun, 2026 NA

Parganas - West Bengal

Tender For spare parts for kraz veh - pipe assy air cyl to brak valveof frt br part no 256b13506241, pipe assy from air cyl to brake valve of part no 256b13506245, pipe assy from air cyl to manual c/valve part no 255b13506255, pipe assy from air cyl to single safety part no 255b13506249, pipe assy from anti freeze evaporator to part no 255b1350620710, pipe assy to horn part no 255bt3721045a, pipe assy to lh front brake cyl part no 255b13506281, plug drain cock part no 256b1101078, protecting bushing part no 255b3408065, qtr glass hinges(rubber) part no dmd-niv-3767, qtr glass lock part no niv, qtr glass rubber part no nk, rifle stand base part no dmd-nk-4009, rifle stand clamp assy part no dmd-nk-4010, ring sealing brg(winch p/shaft) part no 53a2201122, rod sealing part no 214b1310172, rod, strip hold down part no nk, roller bearing gp37611/7611k part no 255b2304020, rubber plate bty box part no nk, run channel beeading part no nk, seal part no 256b3405178, seat back assy/back rest assy seat part no 256b6900200, seat cushion part no 256b6800110, strap hold down part no 255b3703162b, strip weather drop glass part no niv, tail light mtg plate with guard part no nk, thin alluminium flat channel 1/2", l-16 part no nk, trailer plug socket ps-300a(2143730010) part no ps300a3723100, tube air cross to rear axle right brakec part no 214b3506310a, tube assy lh part no 255b4224085b, washer part no 2102919038a, weather strip wind shield part no 2145206050, rear pipe assy from compr to washer part no 256b13506201, shaft clutch part no 236n1701027b, bolt (front road spring) part no 2000817p29, bolt m 14x50 part no 201593p29, cabin floor supporting part no nk, gasket part no 255b8500046, pin part no 260088p18cp29, pin clip part no 256b110111520, gland yoke part no nk, handle inside door part no 2146105182, hatch cover part no 2361601030a, cylinder b 20 part no 256b3513015, cylinder b-40 part no 2503513015, valve, tyre pressure ctrl part no 11312200901, adaptor rear coupling head part no nk, angle plate foot step body part no 255b8506315, ball brg dia 3/8"(200-1702083)/ball dete part no lv6/mt73110002694, bracket holder cam part no 255b3909107, bracket, handle part no 2561108288b, channel upper drop glass part no 2146108255b, corrogated ring support (aps) part no nk, door outer handle part no 2146105152, holder oil seal cross part no 514919, holder oil seal slip yoke part no 522201087, key/wood ruff part no 347013p2, lamp part no 6240001209, pin shoe f/b part no 2003501132a, pipe to pressure gauge part no 255b1383004410, rod bonnet holding stand part no nk, rod tie door latch comp part no 6105102, roller pin angle distance piece part no nk, seal part no 255b3104036, shim 0.1mm/gasket part no 2144501098, spring (aps) part no nk, turn indicator relay part no 2143726030, union outer thread part no 347464p29, cleaner, air part no 2381109012, wing nut, slotted link part no 2125204024a2

CTN :45555783

03 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply of worn wheel profile gauge, made of hardened stainless steel with laser etched permanent marking of "wheel profile size" and "name of wheel profile gauge" on each gauge. wheel profile is made from wire cut edm. all gauges have hardened 45 hrc & 4 mm thick ss plate with calibration certificate from nabl/iso accredited lab. for inspection of wheel profile of all type of wheel sets. in one set consistof following items:- 1. worn wheel profile (for bg wagon) gauge, size 29 mm, qty 01 nos, as per drg. no. 88021. 2. intermediate worn wheel profile gauge, size 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm & 28 mm, qty 09 nos(one each size), as per drg. no. wd-89060/s-02 3. 140t crane wheel profile gauge, size as per drawing, qty 01 no, drg. no. csl-3040 4. tower car mark- ii wheel profile gauge, size as per drawing, qty 01 no, drg. no. jmp/cr-46/2008 5. tower car mark- iii wheel profile gauge, size as per drawing, qty 01 no, drg. no. ga5443/jmp [ warranty period: 30 months after the date of delivery ] ]

CTN :45377762

18 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of ordinary portland cement grade 43,stone aggregate shall be crushed stone 20mm,coarse sand,stone aggregate shall be crushed stone 40mm,rr stone,tmt steel bar 16mm dia,tmt steel bar 12mm dia,tmt steel bar 10mm dia,tmt steel bar 8 mm dia,binding wire 20 gauge 0 point 9mm,shuttering water proof plywood of size 8 feet x 4 feet and 12mm thickness,nails 2 inch,nails 3 inch,nails 5 inch,quick setting,2nd class hardwood plain fillets,wooden ballies 75mm to 100 mm,pbs roll,bitumen or blown type,water proofing compound,hdpe film of 400 micron,loop hole of size 2130 x 1067 mm,wooden scantling 3 point 20m,steel door of size 900x1800 mm,lightning conductor,8 pin cloth hanger,ms round pipe 150mm dia,ms round pipe 20mm,pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0 point 60mm thick,75mm dia pvc pipe for weep hole make supreme or kissan or prince,ms plate 10 mm,ms plate 20 mm,shredded rubber 150 mm,pvc single core 1 point 5 sqmm,pvc single core 2 point 5 sqmm,cable pvc insulated and pvc 1100v gr

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

Tripping Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government