Latest trussing Tenders | Government trussing Tenders

State Government

CTN :45568008

22 Jun, 2026 NA

Delhi - Delhi

Tender For painting of electrical and mechanical equipments and ms structure installed at j and k pocket bps, i pocket bps, mno pocket dilshad garden bps and f block dilshad colony bps under ae(eand m)-iv in ac-62.

State Government

CTN :45568031

22 Jun, 2026 NA

Delhi - Delhi

Tender For painting of electrical and mechanical equipments and ms structure installed at shalimar park bps under ae(e and m)-iv in ac-62.

State Government

CTN :45558226

22 Jun, 2026 34.31 Lacs

Chamba - Himachal Pradesh

Tender For tender for prov. and fixing of equipment / material , design, erection, testing , commissioning for sop to jsv for inspection hut at cheel bangla chowari by prov. 11/0.4 kv 100 kva dtr along ht, lt line in es chowari-ii (u) esd chowari ed dalhousie - (a) supply part-11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 220kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(2 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 1 no., ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, g.i. wire for earthing, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles 300 mm sq., copper thimble 200 mm sq., danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-185mm sq., alluminium paint, prov.acsr, 6/1/3.35 mm, chain link fencing , angle iron, gate etc. for transfromer fencing, prov. transformer bed plinth for 1x400kva s/stn structure complete with cc 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing., lt switched caapcitors 36-kvar for 100 kva dtr, trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)., supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)., fine dressing of the ground., spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)., supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : screened through sieve of i.s. designation 20 mm, filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)., providing and fixing korean grass turf superior qualitywith earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days

Central Government/Public Sector

CTN :45574601

21 Jun, 2026 1.72 Lacs

Ramtek - Maharashtra

Tender For recovery of collapsed ms structure shed of 30tph crushing and screening plant

corporations/Associations/Others

CTN :45561745

04 Jul, 2026 2.97 Lacs

Kolkata - West Bengal

Tender For fabrication of ms structure with cover plate for the valve chamber of 900 mm dia ss grid with other allied works at jananayak hemanta basu market on taratala road.

State Government

CTN :45532844

27 Jun, 2026 4.00 Lacs

Kharagpur - West Bengal

Tender For fabricated shed with ms structure and concrete flooring for conservancy vehicles rest garage,ward no-17

CTN :45577882

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of sports shot auto manual target system , point 177 precihole px 50 indian air pistol , point 177 precihole px 100 peep sight air rifle , point 177 sports shot indian pellets tin , r 10 pellets , rifle shooting kit jacket trouser gloves inner upper inner lower shoes size 6 7 8 and 8 cap timer , pistol kit shoes 6 7 8 and 9 cap and timer , sports shot air rifle targets , sports shot air pistol targets , 300 bar big cylinder , sports shot rifle stand , kneeling roll with cork sports shot , point 177 walther lg 400 alutec electronic air rifle , point 177 morini walther air pistol , electronic target machine sius with all accessories , acp fitted metal table size 13x1 25x3 shooting table as per issf specification 127 sq fr wooden furniture optional , back board area made of 2x2 eposy coated ms pipe structure covered with 18mm cement sheet and 1 pine wood strip size 13x10 as per issf specifications 130 sq ft , 18mm cement sheet partition including sliding door size 38x 8 as per issf specification 304 sq ft , window sheet fixture size 4x6 as per issf specification 10 set , non woven green color carpet with fitting as per issf specification 735sq ft , 24 led light with all required electric wiring as per issf specification , 1 point 5 ton split air conditiner with fitting as per issf specification , painting and finishing as per issf specification , tara flex 12 ft x 3 ft as per issf specification antiskid flooring

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

CTN :45579073

26 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of automatic cold flaring or depressurising unit 5 head , automatic closed loop degassing unit of 5 unit head , automatic online closed loop dewatering , 1 hour cycle and idling interlock , inline and online check weighing scale , automatic online pneumatic testing unit 6 head , sitc cylinder punching unit , semiautomatic hydrostatic testing machine 10 head , degssing unit for 475 kg cyliner , cylinder washing unit , drive unit 5 hp non flp , drive unit 5 hp flp , overhead conveyor with drive unit , sitc chain conveyor system 14 point 2kg or 19 kg , sitc pusher assembly , sitc manual t diverter , sitc double stop asssembly , sitc roller conveyor 14 point 2 kg or 19 kg , shfting and installationof valve opening machine , shfting and installation of 10 head hydrotesting machine , shifting and instllaton of painting booth , shifting and installation of chain conveyor , shifting inad installation of valve screweing maching , shifting and installation of air compressor , shifting and installation of cylinder crushing unit , sply air receiver 0 point 6m3 , fabrication of ms structure , overhead conveyor protection , supply of elcometer , supply of torque wrench , utt bottom thickness machine

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

Trussing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government