Latest try square Tenders | Government try square Tenders

Central Government/Public Sector

CTN :45282510

15 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply, installation,testing and commissioning of 24 vdc twin beam led headlight as per rdso specification no. rdso/2017/el/spec/0134 (rev.04). on various types of track machines. rdso specification no.rdso/2017/el/spec/0134(rev.04) detailed as below:- (1).operating voltage should be nominal 24vdc ,minimum voltage 22vdc and maximum working voltage 30 vdc (2).power consumption should not be more than 100 watts at nominal operating voltage (3).the led unit should have built-in reverse polarity protection.the reverse polarity test shall be conducted at a nominal voltage (24vdc) for 1 minute (4). bright mode ( at distance of 8 mtr)=7000 lux minimum and 9000 lux ( max) . dim mode(at a distance of 8mtr)900lux(min) and 1200lux (max) .(5)led headlight unit shall have ip-66 protection against water and dust. manufacturer should provide certificate for same from any nabl/govt approved lab.(6) dye penetration test for detection of surface defects/cracks on cracks shall be conducted as per is:3658-1981.(7) angle of the beam should be as per clause 12.6.5 of specification rdso/2017/el/spec/0134 (rev.04) (8). headlight be so designed that the failure on one led should not lead to failure of other led (9) led used should be of smd/cob type only.colour temperature of white coloour led shall be 3700k-5000k(white). colour rendering indexshould be greater than or equal to 80 (10) illumination intensity measurement shall not be less than 4.8 lux in bright mode at a distance of 305 metre (11) all kinds of tests as recommended in above mentioned specification to be carried out.accepted make/brand:rdso approved sources [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45278198

08 Jun, 2026 2.51 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of badhai udyog raw material at central jail jabalpur - satkatha wood (all sizes), teak wood (all sizes), plywood 4'x8' 6mm, plywood 4'x8' 8mm, plywood 4'x8' 12mm, plywood 4'x8' 19mm, batten board 4'x8' 19mm, sunmica 1.1 mm (all colors), debright sr 998, cobbler's nails ½'', ¾'', screws (all types and sizes), thinner (pure grade), chandraus resin, shellac flakes, raw sena (natural resin), sandpaper (grades 0 to 80), turkey umber, touchwood finish, sweet yellow pigment (jalebi color), velvet fabric (54'' width), u-foam 4'x6'x1'' (42 density), u-foam 4'x6'x2'' (42 density), u-foam 4'x6'x3'' (42 density), stapler pins (for upholstery work), abro tape, lining fabric (36'' width), hand saw 18'', kachak (wood gauge) - 2 soot, wood clamp (g-clamp) - 6' length, try square 6'', whetstone (for sharpening), file (rasp) 14'', firmer chisel (stainless steel) 1'', 1¼'', carbon brushes (for hand drills & sanders), steel measuring tape (5 meters), planer machine blade 18'', circular saw blade (12'', 120 teeth), wood/plywood cutter blade 4'', screwdriver 15'', paintbrush 2'', electric chainsaw chain 18'', mobil oil

Central Government And Public Sector

CTN :45303173

13 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For providing of facility management services - lumpsum based - industrial; non radiation area-- shifting of piping material from welding shop --1 lumsum quantity is equal to 10000 having unit of measurement is inch meter--for complete details refer boq item no 1(a) ..,facility management services - lumpsum based - industrial; non radiation area-- fabrication and erection including welding of --1 lumsum quantity is equal to 35 having unit of measurement is metric ton--for complete details refer boq item no 1(b) me..,facility management services - lumpsum based - industrial; non radiation area-- dismantling of pipe and structural steel items --1 lumsum quantity is equal to 40 having unit of measurement is metric ton--for complete details refer boq item no 1(c) me..,facility management services - lumpsum based - industrial; fabrication of pipe clamp set for on-line leak rectification in system --1 lumsum quantity is equal to 800 having unit of measurement is inch dia--for complete details refer boq item no 1(d) ..,facility man

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

Central Government/Public Sector

CTN :45265210

15 Jun, 2026 NA

Multi City - Multi State

Tender For supply of digital magnetic inclinometer of length 30 to 35 cm, with magnetic bottom, accuracy- 0.2 degree, units of measurement -degree, mm/meter, minimum 1 year warranty. (note- tenderer must be attached specification or catalogue of item at the time of bid). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45265516

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For denoting no [(mvb item) (n) description : denotingno em 10 b, measurement book2. item detailss.no.pl code(group)itemtypegst(y/n)stock /nonstockorderingconsiderfor evalapprovingagencyinspectionagencycurrencyallowedestimatedrate1 83054315goods (y)stock --- yesconsigneeinr description :(mvb item) (n) description : denoting no em 10 b, measurement book in size 4.25 inch x 6 inch (books), with 100 lvs + 08 lvs for inner cover, index & instructions having both side print on 58 gsm ir logo white water mark security paper in black ink printing instructions: printing with raw material text matter with both side (top against bottom) printing in bilingual (hindi and english) on white water mark paper. cover matter printing one side on kraft paper. text matter & cover matter printing in black colour ink . book numbering on cover page, inner cover page and inner (text) pages in continuous numbers, to be machine serial numbered on right top corner in 6 digits and as per serial number allotted. in no case the number shall be printed on dot matrix/inkjet or laser jet printers. raw material:- for text printing over 58 gsm ir logo white water mark security paper conforming to is 1848/2007 as amended up to 2018 for cover page straw board / grey board as cover 65 dkg and kraft paper 130 gsm conforming to is 1397/90 or latest grade- ii. binding specifications: 100 + 08 leaves , quarter bound binding on top side with straw board / grey board as cover 65 dkg duly pasted with kraftpaper 130 gsm is 1397/90 grade -ii on top & bottom. numbering instructions: the commencing no. isto be obtained from amm (sty) by. supply should be in a bundle of 25 nos. each with strapping. manuscripts to be get approved from amm (sty)/ by. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45147485

25 May, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : tender for supply of welding consumables - welding hand shield armour , , welding wire brush , welding wire brush (stainless steel v grove) , air pipe (100 meters) , gas cutting googles , 11 din black glass , white glass for welding screen , spark lighter , spark lighter stone , spirit level (0.5mm accuracy with magnet) size 30cm , tin cutter - 12 (300mm) , try square engineer esquare 12 inch , tungsten rods 2% thoriated tungsten (red tip) , polyester slings 25mm x 6 meter 1 ton capacity , polyester slings 50mm x 6 meter 3 ton capacity , drum chain 2.5 meter long , capacity 1 ton , chain with o ring and 3 leg , 2.5 m long , capacity 1 ton , octoganal chisel 200mm long x 22mm cutting edge , welding hand gloves , size 18 , spanners , adjustable spanner 300mm 12 , steel rule (set) , measuring tape (set) , allen keys ( six nos set) 4mm to 14mm

CTN :45280892

11 Jun, 2026 14.32 Lacs

Khorda - Odisha

Tender For supply of angle grinder , hand drill machine-both normal and hammering- 10 mm , single phase welding machine , bench vice 4inch , hand screen , welding goggle , hand gloves-02 set , chipping hammer , pipe wrench 40 inch , pipe wrench 18inch , sly wrench 12inch , flat file 12inch rough , flat file 12inch smooth , sprit level 12inchmagnetic , chisel octagonal 150x16-102 , chisel flat 6inch- 1046 , steel rule 12inch , ballpain hammer 800 gram , center punch , try square 12inch , monkey plaier , combination plaier heavy duity 8inch , cushion grip screw driver set, 68-0002c- 16 pc , ring spanner 6-32 set , d spanner 6-32 set , drill bit set 1-19 mm set of 19 pcs. , tool kit metal box all in one 108 pcs , 24 -27 box spannel- , flat nose plier 150 mm , hammer cross pin 200 gram with handle , electric oribtal sander , insulation tester , multi meter with accessories , clamp meter-400amp with accessories , soldering iron with flux and wire kit-30w-220v , lan tester , crimping tool , continuity tester with indicator , allen key set-taparia , c- clamp , hacksaw frame with blade , tool kit bag as per sample , industrial uniform safety apron as per sample

CTN :45255194

12 Jun, 2026 NA

Ranchi - Jharkhand

Tender For multifunction meter with user programmable ct/pt ratio, 5a or 1a ct input for lv or hv networks, input voltage 100-600 v l-l, auxiliary supply 12 - 60 v ac/dc, display: high brightness 3 line 4 digits led, size:96x96 mm, flush mount type, accuracy class :1.0, measurement and display parameters : vaf, kw, kvar, kva, kwh, kvarh, kvah, pf , pa, mm, nc, thd, run hours and on hours similar to rishabh make model no: rish master 3430/socomec diris a40 suitable for mounting in switch board cabinet of lhb power cars. accepted make: rishabh/socomec/siemens/abb/ae/schnider/yokins only. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45193763

04 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of led based twin beam head light with complete assembly part no:- 24v dc 100/90 w conforming to rdso specification no. rdso/2017/el/spec./0134 rev-3 for track machines. part make: ensave/signotron/matsushi/plasser/phooltas/kershaw or equivalent. illumination intensity:- at a distance of 8 meters, it shall not be less than 7000 lux and not more than 9000 lux in bright mode & in dim mode itshall not be less than 900 lux and not more than 1200 lux. during type test illumination intensity measurement will be done at 305 meter and it shall not be less than 4.8 lux in bright mode. note: material suppliedby firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. [ warranty period: 30 months after the date of delivery ] ]

Try Square Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector