Latest tube fitting scrap Tenders | Government tube fitting scrap Tenders

Central Government/Public Sector

CTN :44676245

22 Jun, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : tender for supply of osaero job work for manufacturing of 127 parts ref semfg857 d d -rod , lug , plate , rod , rod , terminal , bolt , bolt , lever , eye bolt , nut , bolt , eye bolt , eye bolt , eye bolt , eye bolt , lug , lug , pipe , pipe , pipe , nut , cup , bush , terminal , washer , washer , bush , flange , support , elbow , adapter , screw in pipe connection , pipe connection , flanged t-piece , flanged elbow , adapter , lever , lug , bush , bush , elbow , elbow , elbow , cross piece , adaptor , threaded elbow , bolt , flange , nut , flange , pipe connection , cross piece , valve , flange , cover , top cover , body , t-joint , angle , flange , flange , pipe connection , flange , flange , pipe connection , angle , nut , flange , body , nut , bolt , axis , flange , nut , flange , end piece , angle , carrier , carrier , stopper , pipe , nut , fitting , flange , adapter , pipe connection , flange , plug , pipe connection , flange , flange , ring , body , ring , bush , nipple , flange , flange , plate , knob , special bolt , bracket , union nut , body , support , nut , nipple , nipple , nut , ring , ring , ring , flange , nipple , elbow , flange , body , body , clamp , eye bolt , cross piece , flange , elbow , link , axis (throttle assembly) , tee-piece

Central Government/Public Sector

CTN :45178202

23 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

Central Government/Public Sector

CTN :45197749

23 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology - secondary master reference - pt 2 d , secondary master impeller stage-1 , laby.root measure tool , inspection tool , inspection tool , inspection tool , high frequency pin + equipment , handling box , tightening pedastal , pin , dn12 pipe , multi purpose flange blank , exp extractor , support connectors , blanking plate , immobilizer , blanking cover , flat seal , test fixture , assembly tool , raising device , support of assembly , support , tool circlip fitting , errection support , removal tool , handling tool , immobilizer pin , adaptation link , assembly fitting , balancing tool , milling fixture , rectification tool , flow check tool , fr plr assy tool , base casting , sleeve fitting tool , marking block , inspection fixture , errection tool , seal assembly cone , rotating plate , hydraulic pressure generating tool , variseal setting , measuring tool , measuring tool , measuring tool , assembly spacer , extractor , seal setting tool , test adaptation , test tool (for tm0073g001) , support tool (for tm0073g001) , special tightening tip , checking tool , control tool , control tool , ring removal/installation , assembly tap cylinder , test interference , grinding fixture for pt1 blade , grinding fixture pt stg 2 , plate cutting tool , handling tool , segment clue tool , handling tool , set of guides , det 2 of tm2689 g101 , lifting tool , engine support mount , setting & removal tool , balancing tool , blank , withdrawal tool , rear bearing seal removal tool , errection support , errection support , orientation tool , adaptation without target , adaptation with target , sheath , sheath , protector , removal tool , assembly support , fuel leak drain check tool , wrench & immobilizer , erection support , handling tool , adaptor fitting , adaptor fitting , wedge height , extractor , air intake cover , shuttle box , key , flow check tool , erosion / impact check tool , erosion / impact check tool , graduating rule , boroscope positioning support kit

CTN :45333118

23 Jun, 2026 280

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of screen , o ring , flow restrictor , flanged fitting , flange segment , pipe clamp half , sleeve , plug-in-board , cover , o ring 4x2mm , elbow , turbine wheel , integrated circuit eeprom not adjusted , spacer ring , pipe clamp half , dc solenoid , retainer , o ring , bushing , cable entry , plug-in board , o ring , plug , ring sealing a18x22 , plug in board , plug-in board , spacer sleeve , washer , flage segment , vent line , sealant , drain line , flange , techometer , o-ring , pressure plate , v -belt kit , spring retainer , cinical spr. washer , drain valve , gasket , retainer , washer , washer , mfb 1 , plug-in-board , o ring , plug-in board , o ring 32x4 , plug-in-board , modular system , measure/monitor mod , adaptor , quick-disconnect cpl , screw , screw , screw m10x30 , cover , cylinder roller bearing , plug , non return valve , plug in board inb2-01/a , plug-in board , plug , monitor screen lcd tft 19 , screw , washer , sealing ring , hex nut , sealing ring , screw-fitting union , intermediate plate , exhaust bellows , bolt hex a3c , spring , duct plate , washer (000433013000) , dial indicator , washer , bearing huosing , plug-in board , incadescent lamp minimum 10 pcs , exhaust turbocharger , flap , bracket , sleeve , valve , incandescent lamp , threaded pin , lamp t6 , 8-36v/50ma , bushing , computer hard disc 2.5 60gb not adjuste , piston ring , plug-in-board , centering element , threaded rod , retainer , threaded bushing , plug-in-board not adjusted , pipe clamp half , spacer bushing , retainer , camshaft , spring washer , belt pulley , strap , retainer , spacer bushing , grommet , support , mounting plate , pipe clamp half , bearing huosing , ring carrier , screw , o ring 100x4mm , adaptor , eprom mem5 mcu pps cps adjusted , con rod bearing size 0 0 , eprom mem5-02 a 740676 programmed , washer , elbow , plug in pipe , plug-in board rob1-01 a , elbow , sealing ring , elbow , test service unit , o-ring , drain line , o ring , vent pipe , hexagon screw , bib 1 , screw , o ring , guard plate , plug in board , base plate , nozzle element

CTN :45559779

25 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For supply of spring helical compression , screw securing electrical contact retainer , bearing , spring , spring plunger torsion coller , key lockating actuting soft , pin contact assy , terminal lug brass 24v point 5a , nut clamp catch , hose , plate instruction , clip spring tension , link locking plunger , spring helical compression 65 , bushing rubber , adapter straight pipe to hose coupling , spring pawl , ring locking socket , rivet solid flat hd steel 8 x 30mm , nut hexagon , screw fillister head , spring helical extension , screw securing 5mm x 47mm , bearing ball single row skf 3075 , bearing ball single thrust 45mm x 85mm x 28mm , bearing ball jnl self aligning double row 35mm x 72mm x 23mm , collar shaft , bush locking plunger , bushing sleeve , plunger detent , spindle , connecting link rigid , locking plate nut and bolt , nut retaining support collar , packing nut , nut , cover lower elevating , cover upper elevating , bushing sleeve elevating , bearing sleeve elevating , spacer traversing , cover plate access traversing , nut castellated hex m24 traversing , washer plain steel 13mm traversing , bracket traversing , spacer * /bid number : gem/2026/b/7633098 + /dated: 15-06-2026 ' ' / bid document 1 / 44

CTN :45543669

23 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of jaq79080a,reverse clutch plate assy , jat79112b,pin for clutch link , jat79107,eye bolt for pressure plate , jat79096a,driving pin , jaq79079a,forward clutch plate assy , jat79113,set screw , jat89209,clamping plate for clutch , jat79250,collar on clutch shaft , jat79106 b,pin for clutch casing , jat79111,clutch link , jat79108b,fulcrum , jat79084 a,clutch ball liver , jat79241 b,bush , jat79239a,locking wire for clutch slide nut , jat79240,thrust bearing , jat79078,stud for clamping plate , jat79076,lock nut for clutch slide , jat79100,set screw , 57911,clutch pressure and spring assy , r450,rocker stud , r436a,locking washer , jat77902,clutch operating die , jat78169,pin for die , jat89412 2,lubricator with wick , jat89407,lubricator bracket lh , jat89406,lubricator bracket rh , jat89408,pipe clip on dust guard , jat89409,lubricator pipe for final drive , jat89411,brass tap 1 by 4 inch bsp , jaq77568c,top support bracket , jaq77572c,hand brake spindle bracket , jaq89167,foot brake pedal , jat89599,clamping pin , jaq77542a,foot brake lever top half , r12230063,foot pedal lever , jat77580, return spring for foot brake lever , jat77567e bearing nut for adjusting bolt , jat77577 spring for adjusting screw , jaq77558d,bottom foot brake lever , r12230062,lh brake shaft bracket with nuts, bolts and spring washer , jat77562e,pin with split pin , jat89600,fulcrum pin with slotted nut and split pin , r14230073,fulcrum pin with slotted nut and split pin , r13230072,foot brake lever for brake shaft pin , jaq77543a,foot brake lever on brake shaft , jaq78011 11,key for foot brake lever , jaf78416e 15a,rh brake shaft bracket 2 halves with nut and bolt and spring washer , jat77566,adjusting bolt , jaq77555b,double lever rh side , jaq77544a,double lever lh side , jaq78011 12,key for double brake lever , jat89606,bottom brake dowell , jat77578,hand brake spindle coller with split pin , jah89165,hand brake lever , jat77579a,hand brake trunion nut , jaq77569b,bottom guide plate , jafh77576b,brake strap complete , jah77583a,brake strap with lug , jaq89166a,set of brake lining , jaq89166a 1,lining 488 mm long , jaq89166a 2,lining 356 mm long , jaq89166a 3,lining 412 mm long , jat77589,supporting spring for strap , jaq89548,stud for brake strap screwed with brake shaft nuts and plain washers , jat77557d,pin for links foot brake lever , jaq78016 5,connector 1 by 8 inch , jat77582,pipe , jat77581,pipe , jaq78016 4,plate adopter for grease nipple , r14230116,link for simpson , r14230117,pin for simpson , 57712b,exhaust pipe , jat89597,u bolt for front support lower , jat89596,u bolt for front support upper , jat89048,clamp wedge for front support , jat89015,spacer , jat79161a,grub screw m12x1.25 , r347 2,head cover stud , r348,head cover nut , r14,felt washer , jat 89395,locking screw for front axle , r13140009,front roll bush grub screw cm6x20lg , jaq79165a,key , jat89017,locking pin , r13140003,bush for rear roll , r150,rear lamp bracket rh , jat89621,distance washer , 57658,loom panel to starter and dynamo , jaq78023,front lamp rh , jaq78024,head light assy lh , jah78439,lamp with //bid details 2 / 105 bulb 12v , jaf695358,instrument cluster , r10310108,instrument cluster , jat78029,horn 12v , r77 3,single cable clip , r77 2,multi cable clip , 57740,cable14 012 red for lh tail lamp , 57740,cable 14 012 black for rh tail lamp , 542492,fuse 10a blade fuse 10a

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

corporations/Associations/Others

CTN :45502867

30 Jun, 2026 21.93 Lacs

Kozhikode - Kerala

Tender For material supply for the installation of 4 line hanging solar power fence at perambra estate - hanging solar power fence, p.p reel insulator-must be of virgin plstic material.polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avh, length 4.6 cm avg), strain insulator- must of poly polypropylene plstic rated for 15 kv uv stabilized,(weight 40gm avg, length 7 cm avg), gi post 12 feet-2" gi pipe guage thickness, total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6mm at end of bend pipe, intermediate post (t angle post)-6ft.,paited(25mmx25mmx3mm)having holes of size 6mm at required interval of fencing installation, supporting post- 10ft., gi-1",14 guage thickness,painted, stay (t angle)-2 ft., painted(25mmx25mmx3mm), 12 swg ht wire-12 guage,25mm dia high tensile with zinc coating for use as conducting wires for binding strain inulator, 14 swg binding wire- high quality zinc coating wire for binding reel insulators,tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade-1.5 mm stainless steel wire rop 304 grade, aluminium ferruel- aluminium ferrule inner dia 3mm, wire tightner- permanent wire tightner made of special aluminium alloy designed for kv,uv stabilized, earth rod- copper plated earth rod 14mm -3 ft. length, earthing compound- earthing compound 8kg, gate handle- gate handle and spring assembly. handle made of polyethyelene, leadout cable- lead out cable for fencie system double insulated gi cable inner core wire 2 sq.mm. hot dipped galvanlsed steel core, cable of with standing 15 kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable- 2.5 mm2 single core copper cable for connecting the solar panel to the tuber battery through charge control unit with required terminal sockets, nut and bolt, washer, lightining diverter- 15 kv rod gap arrester,must be capable of diverting stray lightining and adjustable for spark raps adequate earthing to be provided, 100 watt solar panel- 100 watt/12 volt and above poly crystalline with 10 year warranty having iec/mnre certification, charge control unit- 20a, 12/24 v pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer- energizer with 10 kv output safety standerds to be followed and bis 302-2-76 iec60335-2-76. switch high,medium and low power of settings, fence alarm system- fence alarm system conering area of 1.5 km, solar panel supporting stand with metal box painted ( for battery and energiser)- 18 guage thickness metal box (lockabe). gi sheet, painted should be capable of housing battery, charge controller and energizer and fixed with required clamps and nud and bolt on solar panel support stand made of gl pipe of 50mm daimeter and b class type with suitable arrangement for holding the panel, warning sign- polyethylene plastic with satuatory warning with signs, tubular battery 12v,100ah- 12v, 100 ah c10 rating with full 5 year replacement warranty(tower battery) for energising the energiser

Tube Fitting Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others