Latest tube fixture Tenders | Government tube fixture Tenders

State Government

CTN :45587069

02 Jul, 2026 20.00 Lacs

Etah - Uttar Pradesh

Tender For supply of safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap * /bid number : gem/2026/b/7664537 + /dated: 17-06-2026 ' ' / bid document 1 / 30

CTN :45591042

27 Jun, 2026 NA

Nainital - Uttarakhand

Tender For supply of sluice valve 200mm pn1 point 6 isi marked , sluice valve 150mm pn 1 point 6 isi marked , pump starter 12 point 5 hp delta isi marked , ht tape 3m 19mmx9mtr , ht tape 3m 25mm x 10mtr roll , non return valve 150mm isi marked , led garden light 10w , sluice valve 100mm pn 1 point 6 isi marked , led bulb 7 watts , cable copper pvc frlsh 2 point 5 sqmm multistranded single core , sluice valve 80mm pn 1 point 6 isi marked , sensor based led tube light batten 20w , heating element 1500 watt triangular type , non return valve 100mm isi marked , heating element 2000 watt triangular type , ht cable end box outdoor 3 c x 95 sqmm 11 kv e , led driver for 2 feet x 2feet false ceiling light fitting , ht cable end box indoor 3 c x 95 sqmm 11 kv e , heat strinks joint kit indoor 3c x 95 sqmm , cable copper frlsh pvc 1 point 5 sqmm multi stranded single core , submursible cu cable 16 sqmm x3core isi marked , submursible cu cable 25 sqmm x3core isi marked , sheet metal enclosure with plug top and mcb sp 20a , pvc flexible cable frlsh 0 point 5 sqm three core , pvc flexible cable 23 oblique 00076 twin core , led tube rod 20w essential 1200mm 2100 lm , thermostat for geyser 25 ltr , led electronic driver 150 w , led electronic driver 100 w , fan regulator switch type , mcb 63 amp 4 pole isolator , pvc flexible cable frlsh 1 point 5 sqm three core isi marked , mcb 40 amp 4 pole isolator , cable copper frlsh 1sqmm single core isi marked , mcb 32 amp 4 pole isolator , led electronic driver 45 w isi mrked , thermostat for geyser 50 ltr isi marked , 20amp plug and socket distribution board , modular socket with mcb sp 25a , regulator electronic for ceiling fan modular type , fan regulator dimmer 400 oblique 450w , switch socket combination 6a , led driver 90w , led electronic driver 72 w , mcb sp 06 amp 230 volts 10 ka , led tube light fitting 20 w alum extruded decorative box with driver and tubelight , led bulb 9 w 230 volt with electric backup battery , led tube light fitting 18 w alum extruded decorative box with driver and tubelight //bid details 2 / 136

CTN :45214161

19 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of maruti suzuki spare parts e e - cylinder block assy std , crank shaft assy std , valve set complete , valve guide , valve seals , piston set std , thrust washer std , big end brg std , main brg std , engine overhauling gasket complete with cylinder head gaskit , engine mounting , gear shifting cable complete , brake booster assy with mater cylinder , auxillary tank wind shield washer , wiper blade , catalic converter , seat cover all seat , brake shoe rear , clutch master cylinder , canister purge valve solonide , o2 sensor , clutch plate , pressure plate , release bearing , fuel injector , ignition coil , crank position sensor , cam position sensor , knock sensor , vehicle speed sensor , inlet throttel valve assy electronic , pilot bearing , fan belt tensnor , thermostate valve , water pump assy , timing plate with oil pump , map sensor , timing chain , chain guide , chain guide tensnor , spark plug , all hose pipes engine , seal crank shaft front , seal crank shaft rear , oil stainer , piston ring std , oil sending unit , temp sending unit , fuel filter , oil filter , air filter , fuel pump assy , valve oil control , hose pipe clamp all size , alternator cut out , self starter rocker plate , self solonide switch , gun metal bush , 2k paint white , tich lock , piston w pin and circlip , piston ring set , cylinder linner std , bearing con rod rs 1 , bearing crank shaft rs 1 , engine o h gaskit complete w cy head gaskit , seal valve inlet exhust valve , valve inlet exhaust mpfi , valve guide inlet exhaust , oil pump assy sensor type , timing belt , fan belt , radiator with cap , bearing input shaft , seal cam shaft , ignition switch w key , crank sensor , acc cable , engine mounting both side , tensnior assy , filter gas modulator , mirror rear view l s , fander rear both side , wipper blade , speedometer cable , clutch cable , gear box mounting , hose pipe set complet , hose pipe clamp 01 inch , hose pipe clamp 02 inch , hose cool air , fuel pump , paint 2k , brush gear plate self , cut out alternator , throttle body , valve lock , o ring tappet cover spark plug , bar front stabelizer , switch assy engine start push button type , bulb indicator , fly wheel , brg fly wheel , silencer mufler rear , cleaner assy air complete , hose air cleaner out , element air cleaner section , solonoide switch , tharmostate valve , brake shoe , uj cross , fuel pump motor , injector , clutch release bearing , ht lead set , shock absorber frt , shock absorber rear , disc pad , indicator glass frt with assy , tail light assy , front wheel brg , check nut lock washer , bendex pinion , front bumper parking light , steering gear box oil seal , coolent reservire tank , caron brush , rectifier plate , ac filter , brake disc pad front , rear brake shoe set , clutch pressure plate with release bearing , high beam bulb led 12v-60w , fog lamp bulb h11 12v 55w , parking interior bulb 12v 5w , indicator bulb amber 12 v 21w , stop reverse bulb 12v 21w , disc pad front , wiper blade set , head lamp bulb h7 12v 55w led , brake shoe set rear , head lamp main bulb h4 12v 60 55w led , injector fuel //bid details 2 / 132

corporations/Associations/Others

CTN :45502867

30 Jun, 2026 21.93 Lacs

Kozhikode - Kerala

Tender For material supply for the installation of 4 line hanging solar power fence at perambra estate - hanging solar power fence, p.p reel insulator-must be of virgin plstic material.polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avh, length 4.6 cm avg), strain insulator- must of poly polypropylene plstic rated for 15 kv uv stabilized,(weight 40gm avg, length 7 cm avg), gi post 12 feet-2" gi pipe guage thickness, total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6mm at end of bend pipe, intermediate post (t angle post)-6ft.,paited(25mmx25mmx3mm)having holes of size 6mm at required interval of fencing installation, supporting post- 10ft., gi-1",14 guage thickness,painted, stay (t angle)-2 ft., painted(25mmx25mmx3mm), 12 swg ht wire-12 guage,25mm dia high tensile with zinc coating for use as conducting wires for binding strain inulator, 14 swg binding wire- high quality zinc coating wire for binding reel insulators,tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade-1.5 mm stainless steel wire rop 304 grade, aluminium ferruel- aluminium ferrule inner dia 3mm, wire tightner- permanent wire tightner made of special aluminium alloy designed for kv,uv stabilized, earth rod- copper plated earth rod 14mm -3 ft. length, earthing compound- earthing compound 8kg, gate handle- gate handle and spring assembly. handle made of polyethyelene, leadout cable- lead out cable for fencie system double insulated gi cable inner core wire 2 sq.mm. hot dipped galvanlsed steel core, cable of with standing 15 kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable- 2.5 mm2 single core copper cable for connecting the solar panel to the tuber battery through charge control unit with required terminal sockets, nut and bolt, washer, lightining diverter- 15 kv rod gap arrester,must be capable of diverting stray lightining and adjustable for spark raps adequate earthing to be provided, 100 watt solar panel- 100 watt/12 volt and above poly crystalline with 10 year warranty having iec/mnre certification, charge control unit- 20a, 12/24 v pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer- energizer with 10 kv output safety standerds to be followed and bis 302-2-76 iec60335-2-76. switch high,medium and low power of settings, fence alarm system- fence alarm system conering area of 1.5 km, solar panel supporting stand with metal box painted ( for battery and energiser)- 18 guage thickness metal box (lockabe). gi sheet, painted should be capable of housing battery, charge controller and energizer and fixed with required clamps and nud and bolt on solar panel support stand made of gl pipe of 50mm daimeter and b class type with suitable arrangement for holding the panel, warning sign- polyethylene plastic with satuatory warning with signs, tubular battery 12v,100ah- 12v, 100 ah c10 rating with full 5 year replacement warranty(tower battery) for energising the energiser

Corporations And Associations And Others

CTN :45488870

19 Jun, 2026 NA

Batala - Punjab

Tender For corrigendum : contract for supply of turbine spares triveni - b supply of set 1st stage nozzle with spacer & end piece supply of welded diaphragm 2nd stage supply of welded diaphragm 3rd stage csm batala make:- triveni tst-1150-hr-29 14 mw, working pressure-87 kg/cm². маx temp.510 c, back pressure part a 1 lub oil filter element 16 micron control oil filter-451gpm-10 micron emergency oil filter element tv lifting spindle bearing rod end bearing spherical speical stud cap nut over speed trip shaft with gear valve for over speed trip & spring solenoid coil 110 v vibration probe extension cable drivers oil filter element for oil mist separator (1 set = 07 nos.) relay 3 c/o 24 v dc unitrol 6080 di converter power supply unit surge suppressor potential transformer, pti-pt3 current transfer, ct9-ct11 ht fuses, hf1-hf3 ht fuses, hf4-hf6 current transformer, ct2-ct4 current transformer, ct5-ct7 check sysnchronising relay auto synchronising no volt relay power contractor, 150a power contractor, 25a field failure relay soft starter power supply unit signal isolator

CTN :45139282

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of gasket , o ring , gasket , starting valve , wrench , bearing shell connecting rod , piston 2 parts assembly , liner pa4 200 , valve guide , cylinder head , injector equipped assembly , spiral wound gasket , gasket , tool cylinder head hydraulic test , tooling erection tacking to pieces , tool for valve seat , ass low malf bearing , tool for half jaw , combustion chamber cock , tool demper , inlet push rod , tool for honing liner , filter element , 80 100 ht water pump ccw , 80 100 ht water pump ccw , rack sensor fr xxbnn151349 , speed sensor fr xxbnn151349 , valve seat insert , tool for fitting , engine controller fr xxbnn151349

CTN :45527067

22 Jun, 2026 NA

Imphal - Manipur

Tender For supply of mt 40 c c - mt 40 c c - lv7 xenon nk 00000000000000000 link rod large xenon , lv7 xenon nk 00000000000000000 link rod small xenon , lv7 re nk 00000000000000000 chain sprocket set , lv7 tmb nk 00000000000000000 temp sensor unit , lv7 tmb nk 00000000000000000 rpm meter , lv7 2 5 ton nk 00000000000000000 wiper wheel box , lv7 mg nk 00000000000000000 ht lead , lv7 re nk 00000000000000000 ignition switch , lv7 mpvy nk 00000000000000000 pneumatic pipe , lv7 2 5 ton nk 00000000000000000 timing oil seal , lv7 2 5 ton nk 00000000000000000 oil seal 7808 , lv7 2 5 ton nk 00000000000000000 pilot bearing , lv7 2 5 ton nk 00000000000000000 gear box oil seal , lv7 re nk 00000000000000000 rear brake shoe , lv7 mpvy nk 00000000000000000 main leaf frt , lv7 re nk 00000000000000000 link rod brake pad , lv7 sumo nk 00000000000000000 spring bush , lv7 sumo nk 00000000000000000 u bolt , lv7 sumo nk 00000000000000000 rod spring , lv7 2 5 ton nk 00000000000000000 field coil assy , lv7 mg 33920m80cs0 controller assy epi , lv7 mg nk 00000000000000000 damping pad , lv7 mg nk 00000000000000000 starter motor , lv7 stln nk 00000000000000000 knuckle bearing , lv7 stln nk 00000000000000000 head gasket , lv7 tmb nk 00000000000000000 temp sensor unit army bus , lv7 sumo nk 00000000000000000 head gasket , lv7 2 5 ton nk 00000000000000000 bush set , lv7 mpvy nk 00000000000000000 pneumatic valve , lv7 mg nk 00000000000000000 suspension bush set , lv7 mg nk 00000000000000000 element air cleaner , lv7 scorpio nk scorpio 0007 fuel filter , lv7 scorpio nk scorpio 101069 hose steering , lv7 scorpio nkscorpio015 belt 4 pk , lv7 scorpio nkscorpio029 bush silent block , lv7 innova nk 00000000000000000 disc clutch , lv7 innova nkinnova589 cover assy clutch , lv7 innova nk 00000000000000000 fuel pump motor , lv7 innova nkinnova0011 bearing clutch release , lv7 innova nk 00000000000000000 intake manifold , lv7 innova nk innova 010 nozzle , lv7 innova nk 00000000000000000 fuel filter , lv7 innova nk 00000000000000000 fuel pipe , lv7 innova nk toyato 03 air filter , lv7 innova nk innova 018 power window controller , lv7 innova nk innova 0012 brake pad , lv7 innova nk toyato 04 ac belt , lv7 innova nk innova 0021 brake shoe , lv7 innova nk innova 017 power window switch , lv7 innova nk 00000000000000000 oil filter //bid details 2 / 44

Central Government/Public Sector

CTN :45535346

03 Jul, 2026 NA

Nadia - West Bengal

Tender For supply commissionig and installtion of furniture at ground floor of student hostel at bric nibmg kalyani nadia - single bed length: 2100 mm x width 900 mm, thickness of head board and leg board will be (19+19+1+1) mm comprising on 19 mm bwr ply (sylvan/ century/ green) pasted over parallel with adhesive (fevicol) finished with 1 mm laminate (aica / formica / greenlam) both side . size of head board: 900 mm (w) x 750 mm (ht.) & leg board: 900 mm (w) x 600 mm(ht.) side connector will be 125 mm x 41 mm sal wood and outer side of which will be finished with 6 mm ply with 1 mm laminated. 03 no of tana (s) between two connector made of 50 x 37 mm sal wood, bed top: made by 19 mm bwr plywood. all exposed edges and teak wood beading will be polish finish., supplying and fixing study table, size : 1350 mm (l) x 600 mm (w) x 750 mm (h) made of 19 mm thick bwr ply with 1 mm laminate and inside polish finish. modesty (ht: 600 mm) will be made of 12 mm thk. bwr ply. table will have 1 no lockable drawer operating on telescopic channel (size: 400 mm l x 150 mmh x 450 mm (d) and 1 no. pedestal (size: 400 mm l x 450 mmh x 450 mm (d) at right hand side. all exposed edges and teak wood beading will be polish finish., supplying and fixing 2 door wardrobe of size : 2100 mm (h) x 900 mm (l) x 600 mm (d) having 2 shelves and 3 compartment ,1 locker (300 mm ht x 300 mm l x 600 mm d) and 1cloth hanging rod made of 1" dia 20 swg ss 304 pipe. total structure made of 19 mm thk bwr ply (sylvan / century / green) with 1 mm laminate and inside polish finish.back side will be made of 6 mm thk bwr ply. one door will be fitted with mirror size: 48 " (h) x 13 " (w) with beat outside. all exposed edges and teak wood beading will be polish finish., supplying and fixing wall hanging rack- open type having 4 nos. compartment made of 19 mm bwr ply (sylvan / century / green) & back side with 12 mm ply . size: 1350 mm (l) x 300 mm (d) x 750 mm (ht.). inside and teak wood beading will be polish finish., chair made of standard c.p teak wood, with arm. back leg-2"x1.5"x32"(from floor back top)- 2 nos. front leg-2"x1.5x15"-2 nos. back-1.5"x 3/4"- 4 nos. (vertical curve connector); 3"x1"x1.6"- 1 no. top runner (below seat)-3"x 1"x required length 4 nos; bottom connector- h shape with 1"x1" are required size. seat width front side-22" seat width back side-18" seat- 3/4" thick plunk with 2 no. joint.seat depth-18"with complete polish.

Central Government/Public Sector

CTN :45543105

04 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of gem schedule 1 cup seal i/d 300 x o/d 340 x 20h as per bhel purchase specifications ht 00201 (rev. -0 , gem schedule 2 u-packing seal (material polyurethane) for rod dia. 25mm, groove od 33mm, groove widt , gem schedule 3` o'-seal ring as per bhel drawing no. 42120122801 (rev. -00) . suitable for working pre

State Government

CTN :45562976

23 Jun, 2026 NA

Haldwani - Uttarakhand

Tender For supply of different type of material for damuwadhunga sector of kamaluwaganja sub division of electricity distribution division (rural), haldwani against head operation and maintenance for the year 2026-27 - lt clamp with n&b st pole sp-55, lt shackle insulator 75x65mm, lt bushing rod suitable for 400kva t/f, copper strip 75x6mm, bushing rod 100 kva t/f lt side, al. lug long barrel 120 sq. mm., al. lug long barrel 400 sq. mm., al. lug long barrel 630 sq. mm., tinned copper fuse wire 5 amp, tinned copper fuse wire 10 a, lt pvc tape, ht tape, lt clamp sp-21 with nut & bolt

Tube Fixture Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

State Government