Latest tube bend Tenders | Government tube bend Tenders

Central Government/Public Sector

CTN :45711072

20 Jul, 2026 36.87 Lacs

Amritsar - Punjab

Tender For special repair to dbs sub main wiring and miscellaneous items at mh and central institute at old amritsar cantt - taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed., material and labour for point wiring in existing conduit for following point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn through and existing pvc concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) complete all as specified and as directed. note : 1 switch, socket, regulator, bell, ceiling rose, regulator, lamp holder will be measured and paid separately.a) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board., c) for one three pin 5 amps socket outlet on the same board with other switch, d) for one light point controlled by two way switch, all a per item no 2 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper multi stranded conductor connecting to common earth dolly complete all as specified and directed., material and labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn and including surface pvc conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using cement mortar (1:3) complete all as specified and as directed. note : 1. switche, socket, regulator, ceiling rose, bell, lamp holder will be measured and paid separatelya) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board, c) for one three pin 5 amps socket outlet on the same board with other switches, d) for one light point controlled by two way switch, all a per item no 7 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper solid conductor connecting to common earth dolly complete all as sp

Central Government/Public Sector

CTN :45559626

02 Jul, 2026 NA

Medak-T - Telangana

Tender For corrigendum : tender for supply of b7e1z36880 pipe fittings bhel hpep stock - valve rhd20 s , union gai 20 sm , union tee 20 s , nipple welding sk020 x 3 , adjustable l coupling evl20 s , union ga120 sm , coupling elbow w20 s , coupling stud evl20 s , tube bend 90deg 48 3x3 6 bw cs , tube bend 90deg 25 x 2 bw cs , elbow 90deg lr dia76 1x4 0 thk bw as

Central Government/Public Sector

CTN :45632177

06 Jul, 2026 NA

Trichy - Tamil Nadu

Tender For corrigendum : providing of custom bid for services - maintenance (amc) of tube bending machines and identified activity at identified location, bhel trichy

State Government

CTN :45728735

06 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For fabrication of high-pressure boiler tube bends during shutdown and overhauls , as and when required basis at unit # 4 & 5 boiler in 2 x 500 mw bhusawal tps

CTN :45726077

31 Jul, 2026 25.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates of leakage repair material for financial year 2026-27 at nagar palika parishad tikamgarh - inviting rates of leakage repair material for financial year 2026-27, d- joint for ci pipe (size 80 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for ci pipe (size 100 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for ci pipe (size 150 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for hdpe pipe (size 90 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for hdpe pipe (size 110 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for hdpe pipe (size 160 mm) complete with rings and nut bolts of necessary size (as per isi), plastic ring (size 80 mm ) for d- joint of ci pipe (as per isi), plastic ring (size 90 mm ) for d- joint of hdpe pipe (as per isi), plastic ring (size 100 mm ) for d- joint of ci pipe (as per isi), plastic ring (size 110 mm ) for d- joint of hdpe pipe (as per isi), plastic ring (size 150 mm ) for d- joint of ci pipe (as per isi), plastic ring (size 160 mm ) for d- joint of hdpe pipe (as per isi), telpiece (size 90 mm ) for d joint of hdpe pipe (as per isi), telpiece (size 110 mm ) for d joint of hdpe pipe (as per isi), telpiece (size 160 mm ) for d joint of hdpe pipe (as per isi), telpiece (size 80 mm ) for d joint of ci pipe (as per isi), telpiece (size 100 mm ) for d joint of ci pipe (as per isi), telpiece (size 150 mm ) for d joint of ci pipe (as per isi), mj collar (size 200 mm or 8 inch) complete set (as per isi), mj collar (size 250 mm or 10 inch) complete set (as per isi), mj collar (size 300 mm or 12 inch) complete set (as per isi), mj collar (size 350 mm or 14 inch) complete set (as per isi), sluice valve (size 80 mm) 3 inch complete with telpiece and nut boltes (as per isi), sluice valve (size 100 mm) 4 inch complete with telpiece and nut boltes (as per isi), sluice valve (size 150 mm) 6 inch complete with telpiece and nut boltes (as per isi), nut bolt set of size dia- 4 mm and length 4 inch (as per isi), nut bolt set of size dia- 4 mm and length 5 inch (as per isi), nut bolt set of size dia- 4 mm and length 6 inch (as per isi), nut bolt set of size dia- 4 mm and length 9 inch (as per isi), nut bolt set of size dia- 4 mm and length 2.5 inch (as per isi), nut bolt set of size dia- 5 mm and length 2.5 inch (as per isi), nut bolt set of size dia- 5 mm and length 6 inch (as per isi), nut bolt set of size dia- 5 mm and length 9 inch (as per isi), graphite gland (3 sooti) (as per isi), graphite gland (4 sooti) (as per isi), graphite gland (6 sooti) (as per isi), packing for sluice valve, lead bull (as per isi), tee ci (size 6x4) (as per isi), tee ci (size 3x3) (as per isi), tee ci (size 3x4) (as per isi), tee ci (size 6x6) (as per isi), tee ci (size 4x4) (as per isi), tee hdpe (size 3x3) (as per isi), tee hdpe (size 4x4) (as per isi), tee hdpe (size 6x6) (as per isi), tee hdpe (size 6x4) (as per isi), tee hdpe (size 6x3) (as per isi), tee hdpe (size 4x3) (as per isi), reducer hdpe (size 10x8) (as per isi), reducer hdpe (size 6x4) (as per isi), reducer hdpe (size 8x6) (as per isi), reducer hdpe (size 4x3) (as per isi), reducer hdpe (size 6x3) (as per isi), elblow hdpe (size 90 mm) (as per isi), elblow hdpe (size 110 mm) (as per isi), elblow hdpe (size 160 mm) (as per isi), m-seal, cycle tubes, bend of size 90mm (3") for hdpe pipes (as per isi), bend of size 110 mm (4") for hdpe pipes (as per isi), bend of size 160 mm (6") for hdpe pipes(as per isi), end cap (size 90 mm) (as per isi), end cap (size 110 mm) (as per isi), end cap (size 160 mm) (as per isi), gi pipe (size 2"), gi elbow (size 2"), gi flange set (size 2"), gi socket (size 2"), gi union (size 2"), gi nipple (size 2"x12"), gi nipple (size 2"x9"), gi nipple (size 2"x6"), gi nipple (size 2"x4"), gi nipple (size 2"x3"), gi nipple (size 2"x2"), gi short nipple (size 2"), gi tee (size 2"x2"), gi tee

CTN :45709651

17 Jul, 2026 NA

Asansol - West Bengal

Tender For supply, installation and commissioning of hydraulic swaging unit set along with tube bending, cutting & deburring unit as per details enclosed in annexure [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45345524

06 Jul, 2026 10.97 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds.

State Government

CTN :45703400

10 Jul, 2026 NA

Jharsuguda - Odisha

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - annual overhauling of c&i equipment’s for - box spanners (mm & inches), size up to 50-min. 4 sets, ring spanners (mm & inches), size up to 50-min. 4 sets, de spanners (mm & inches), size up to 50-min. 20 sets, slide wrench 6", 8"- min. 20 sets, slide wrench 12"-min. 10 sets, pipe wrench 300 mm min. 5 sets, pipe wrench 450 mm min. 5 sets, combination pliers - min. 20 sets, mini connector (taparia make) - min. 20 sets, 1. screwdriver sets-min. 20 sets, - champion set - min. 20 sets, . connector taparia (932) - min. 20 nos, . watchmaker set - min. 5 sets, . junior hacksaw with frame - min. 20 sets, 6. teflon hammer - min. 5 sets, 6. ss tube cutter-min. 5 sets, . slide cutting pliers-min. 20 sets, nose pliers-min. 20 sets, . soldering iron - min. 2 sets, multi meter with all function (fluke) - min. 20 sets, ma source-min. 2 nos, wire stripper-min. 20 sets, flat screwdrivers (small/medium/large) - min. 20 sets, led torch light (good quality)-min. 20 sets, allen key set (mm & inches), normal sizes-min. 20 sets (each), portable drilling machines with bits-min. 3 nos, portable grinding machines with wheels-min. 4 nos, general file set & needle file set-min. 5 sets, chisel set, hacksaw frame with sufficient blades-min. 5 sets, centre & hole punch set; letter & number punch set-min. 3 sets, tap set (6, 8, 10, 12 mm & ", 6", 1")-min, 4 sets each, flaring tool-min. 3 not, pointer puller-min. 3 nos, portable welding set with welding rods-min. 4 sets, hand lamp set (24 vdc)-min 5 sets, hand lamp set (240 vac)-min. 7 sets, power extension board with rccb-min. 7 nos, feeler gauge-min. 3 sets, thread gauge-min. 3 sets, ss tube benders (6, 8, 10, 12 mm)-min. 4 sets each, circlip plier (inner/outer)-min. 3 nos each, air blower-min. 4 nos, anti-spark spanner set & slide wrench (6", 8", 12")-min. i sets, spray painting machine-min. 3 sets, magnetic spanner-min. 2 sets2x660 mw unit # 4.

State Government

CTN :45710108

30 Jun, 2026 NA

Mahendragarh-Hr - Haryana

Tender For pathera block: kanina panchayat: pathera dist.: mahendragarh annual maintenance work for water supply. - providing and fixing of nut & bolt, providing and fixing starter oil, providing and fixing of 6 mm sq submersible cable 3 core, dismantling old and used gi flanged pipe line, making new key for 100mm dia s.v 6 feet long 20mm dia gi pipe inculding welding handle ci cap suppoting ms patti, providing and fixing ci flange, gi bend, rubber sheet, repair of 50 hp starter

State Government

CTN :45722935

30 Jun, 2026 NA

Jhajjar - Haryana

Tender For prov. & fixing ci d/f bend 4"x90 degree, c.i. 100mm end cap complete., rectification of w/s leakages job work, repair of 150mm sluice valve

Tube Bend Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors