Latest tube end cover Tenders | Government tube end cover Tenders

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

CTN :45058672

11 May, 2026 9.00 Lacs

Ludhiana - Punjab

Tender For supply of modular piano type domestic electrical switches isi marked to is 3854 (q2) , modular piano type domestic electrical sockets isi marked to is 1293 (q2) , pvc insulated copper cable single core and multi core circular sheathed with flexible conductor (v2) isi marked to is 694 (q2) , flat cable, aluminium conductor with pvc insulation and sheathed isi marked to is 694 (q2) , changeover switch 32 amp four pole off load with enclosure , changeover switch 63 amp four pole off load with enclosure , changeover switch 100 amp four pole with enclosure , led security light 35 oblique 36w ip65 isi marked , led flood light 30w ip65 isi marked , led tube light fitting 10 watt 2 ft long 6500k , led tube batten 18 oblique 20w 6500k , led light round recess surface type 18 oblique 20watt , switch socket combination piano type 5 oblique 6 amps , service wire of size 16 sqmm x 2 core isi marked 100 mtr roll , cable pvc insulated flat aluminium conductor 10 sqmm 3 core isi marked , ht insulation epr self amalgamating tape 11kv 38mm x 9 oblique 10 mtr , tape insulation 25mtr x 20mm width isi marked , heating element triangle 2 kw , capacitor oblique condenser 2.5 mfd , aluminum lugs size 240 sqmm , aluminum lugs size 185 sqmm , aluminum lugs size 150 sqmm , aluminum lugs size 120 sqmm , aluminum lugs size 70 sqmm , aluminum lugs size 50 sqmm , aluminum lugs size 35 sqmm , aluminum lugs size 25 sqmm , plug and socket in sheet metal box 01 mcb 20 amps isi marked , dol starter 25-33 amps, 415v, 3 phase isi marked , submersible pump starter 55 amps, 415v, 3 phase isi marked , gi pipe medium grade 100 mm bore isi marked , gi pipe medium grade 80 mm bore isi marked , gi pipe medium grade 50 mm bore isi marked , gi tee 25 mm , gi elbow 25 mm , gi nipple 25 mm 6 inch long , gi nipple 25 mm 4 inch long , gi socket 25 mm , gi nipple 20 mm 6 inch long , gi socket 20 mm , gi nipple 20 mm 4 inch long , nrv 80 mm , nrv 100 mm , upvc butterfly valve 160 mm , upvc butterfly valve 110 mm , upvc union 110 mm , upvc foot valve 160 mm , gm gate valve 50 mm , gm gate valve 25 mm , gm gate valve 20 mm , transformer oil di electric strength not less than 60 kv best quality , inner brass assembly for geyser 06 holes isi marked , plate 8m modular isi marked , disc type insulator 11 kv , single phasing preventer isi marked , primer paint red oxide , spn db 12 way double door isi marked , spn db 8 way double door isi marked , spn db 4 way double door isi marked , astronomical timer switch isi marked , timer relay switch isi marked , pvc junction box for street light , refrigeration gas chlorodifluora methane type cfm 22 r22 of size 1 kg cylinder , thermostate 230v for geyser 7 inch isi marked , fuse barrel 11 kv , power contactor 100-105amps 4 pole isi marked , pvc conduit pipe 1 inch dia 3 mtr length round shape isi marked , pvc casing caping 1 inch x 3 mtr long , fuse wire copper tinned 25 swg , submersible tullu water pump 18 w for desert cooler isi marked , grass pad for desert cooler standard size , indicator bulb ac 220v neon type with wire for geyser red and green isi marked , brass dead nut 3 oblique 4 inch for geyser isi standard , pin type insulator 11 kv , lower shutter for exhaust fan , adjustable nozzel 2 inch dia for swimming pool , geyser safety valve 0.8 mpa isi standard , pvc connection pipe hot and cold 18 inch isi marked , geyser inner tank steel 25 ltrs , solar heating element 3 kw isi marked , fastener 4 inch with screw for installation of geyser isi standard , pvc drain pipe 15 mm bore for ac 3 mtr long //bid details 2 / 53 15 mm bore for ac 3 mtr long

Central Government/Public Sector

CTN :45034082

20 May, 2026 3.97 Crore

Nagpur - Maharashtra

Tender For providing of custom bid for services - provision of subsidized meal/ food to the running staff,custom bid for services - provision of gas cylinders for preparation of meals,custom bid for services - provision of washing and ironing of bed sheets, pillow covers, mosquito nets, blankets, window curtains and door curtains,custom bid for services - provision of materials for cleaning and housekeeping work,custom bid for services - provision of pest control service, bed bug treatment and development of garden & lawn which includes supply of new plants, pots/ gamlas & other associated materials,custom bid for services - supply of 04 newspaper daily and 04 magazines weekly,custom bid for services - provision of 02 nos 250 lph ro on hiring basis for 2 years, stainless steel cutting table and installation & fitting of gas pipeline for kitchen,custom bid for services - provision of following items for kitchen management and overall management of running room,custom bid for services - provision of manpower for complete management of

Central Government/Public Sector

CTN :45024895

09 May, 2026 NA

Hyderabad - Telangana

Tender For supply of spares and consumables for icp oes instrument - spares and consumables for icp oes instrument - replacement helix seal, for icp spray chamber, 4/pk., part no: g8010-80042, oneneb series 2, nebulizer, inert icp nebulizer 1/p, part no-g8010-60293, quartz outer tube set for agilent 5000 series rv icp-oes, part no-g8010-60264, v-groove, inert high tds nebulizer, for icp-oes 5800, part no-g8020-69001, inert alumina injector 1.8mm id, for easy-fit fully demountable torch for agilent 5800 icp-oes instruments, part no-g8020-47005, work coil copper 5000 series icp-oes 1/p work coil assembly, copper for 5100/5110 and 5800/5900 icp-oes, 1/pk, part no-g8020-68017, icp internal std kit no.1 blk/blk tubes. provides components required for on-line addition of internal standard. incl. black/black pvc peristaltic pump tubes, y-piece + connecting tubing. part no-9910124000, aqueous pvc peristaltic pump tubing, white/white, 12/pk. suitable for all aqueous solutions, medium-concentrated acids and bases. part no: 3710034400, aqueous pvc peristaltic pump tubing, blue/blue, 12/pk. suitable for all aqueous solutions, medium-concentrated acids and bases. part no: 3710034600, ezylok gas connector for carrier gas, suits most concentric nebulizers used with icp-oes/ms. only ezylok connector supplied, suits 4 mm od gas inlet tubing., part no-g3266-80015, replacement air inlet filter element, for 5800 icp-oes, part no-g8020-68016, replacement calcium fluoride glass for the radial view pre-optics window assembly, part no-g8010 68015, detachable sample line 1/16in od oneneb2 sample inlet fitting for oneneb series 2 nebulizer. includes capillary connector with captive sample capillary tubing 0.5mm id x 1/16 inch od x 750mm long, part no-g8010-60345, "o-ring kit for inert spray chamber (pn g8014-68002) used with 5100/5110 icp-oes and mp-aes includes 3 o-ring, part no-g8014-68005magnesium (mg) standard, 1,000 µg/ml, in 5% hno3, 500 ml, part no-5190-8482", nickel (ni) standard, 1,000 µg/ml, in 5% hno3, 500 ml, part no-5190-8492, molybdenum (mo) standard, 1,000 µg/ml, in 1% nh4oh, 500 ml, part no-5190-8488, niobium (nb) standard, 10,000 µg/ml, in 2% hf, 100 ml, part no-5190-8424, titanium (ti) standard, 1,000 µg/ml, in h2o, 100ml, part no-5190-8545, tungsten (w) standard, 1,000 µg/ml, in 5% hno3, trace hf, 100ml, part no-5190-8547, vanadium (v) standard, 10,000 µg/ml, in 5% hno3, 100 ml., part no-5190-8228, zirconium (zr) standard, 1,000 µg/ml, in 5% hci, 100 ml, part no-5190-8559, aluminum (al) standard, 10,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8352, calcium (ca) standard, 10,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8368, bismuth (bi) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8252, mercury (hg) standard. 1,000 µg/ml, 100 ml, part no-5190-8485, chromium (cr) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8344, copper (cu) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8348, iron (fe) standard, 1,000 µg/ml, in 5% hno3, 500 ml, part no-5190-8472, selenium (se) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8519, zinc (zn) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8557, cobalt (co) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8346, manganese (mn) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8483, scandium (sc) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8517, yttrium (y) standard, 10,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8232, rhenium (re) standard, 1,000 µg/ml, in 5% hno3, 100 ml, part no-5190-8507

CTN :44778475

05 May, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of inj dexmedetomidine 100 mcg per ml , inj etomidate 2 mg per ml of 10ml vial , inj neostigmine 0 point 5mg in 1ml ampoule , inj lignocaine hcl 2percent without adrenaline vial of 30ml suitabl , inj oxytocin 5 oxytocic units per 1 point 0 ml amp , inj hydrocortisone acetate 25 mg per ml vial of 5 ml , inj etophyllin bp 84 point 7mg and theophyllin ip 25 point , inj pheniramine maleate 22 point 75 mg per ml amp of 2ml avil , dressing wound care 20cm x 20cm box of 3 , bandage t shaped , laryngoscope adult bulb for , laryngoscope cell small 1 point 5 volt aa size , enzymatic detergent solution containing bacterial protease , 0 point 5percent w oblique v chlorhexidine gluconate in 70 percent v , 1perecent w oblique v available iodine in non oxynoi iodine surfactant base 500 ml bott , propan 2 ol 63 point 0g equal 72 vol percent benzalkonium , hydrogen peroxide solution with stabilizer ip 20 volume 500 ml bott , paraformaldehyde tab , ethylene oxide gas cartridge , knife bard packer blade size 1 fitting commercial no 11 packet of 6 , knife bard packer blade size 1 fitting commercial no 15 pac of 6 , knife bard packer blade size 2 fitting commercial no 22 packet of 6 , skin graft blades for humbys knife blade , post operative waterproof flexible , lignocaine hcl 2percent with adrenaline , inj esmolol pack containing 100mg in 10 ml vials ) /bid number : gem/2026/b/7372114 * /dated: 07-04-2026 & & / bid document 1 / 25

Central Government/Public Sector

CTN :44721007

01 May, 2026 35.99 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of wall painting with acrylic emulsion paint , providing and applying white cement based , finishing walls with acrylic smooth exterior paint , 15 mm cement plaster , neat cement punning , providing and fixing bright finished brass hanging type floor door stopper , painting with synthetic enamel , applying one coat of water thinnable cement primer , 6mm cement plaster , providing and fixing ist quality ceramic glazed wall tiles , white washing with lime , clearing and stripping the site , supply and transport of earth , earth work in excavation , providing and laying in position specified grade of pcc , providing and laying in position specified grade of reinforced cement concrete , steel reinforcement , centering and shuttering , structural steel work riveted , providing and fixing isi marked flush door shutters , providing and fixing concertina coil fencing , with gi barbed wire , providing and fixing gi chain link fabric , removal of wet dry sludge , removal of existing damaged glass , welding by gas or electric plant , removal of existing damaged door , dismantling colour coated roofing sheets , rectifying all defects causing leakage in pre coated iron profile roofing sheets , providing and fixing precoated galvanised iron profile sheets , demolishing rcc work by mechanical means , supplying and applying bituminous solution primer , random rubble masonry , brick work with common fly ash bricks , providing and injecting chemical emulsion , half brick masonry , providing and fixing white vitreous china pedestal type water closet , providing and fixing wash basin , providing and fixing beveled edge mirror , providing and fixing cp brass bib cock , providing and fixing cp brass stop cock , providing and fixing water closet squatting pan , providing and laying ceramic glazed floor tiles , providing and fixing on wall face un plasticised rigid pvc swr pipes , providing and placing on terrace polyethylene water storage tank , providing and fixing inposition collapsible steel shutters , providing and fixing ptmt pillar cock , providing and laying bituminous concrete , sub-base course , base course , providing and fixing brass 100mm mortise latch an dlock with 6 levers , developing lawn , 30 mm thick factory made polyvinyl chloride , providing and fixing gi chain link fabric , do gi pipe 25m dia , 32 mm dia nominal bore , 50 mm dia nominal bore , providing and fixing false ceiling , supplying and filling in plinth , providing and laying dampproof course , finishing with epoxy paint , providing fixing glass panes , providing and laying vitrified floor tiles , providing and laying polished granite stone , providing and fixing stainless steel , providing and fixing stainless steel 24 inch towel rod , providing and fixing of overhead shower , providing and fixing of shower arm casted chrome , providing and fixing with all fittings of angle cock , providing and fixing with all fitting of two way bib cock , providing and fixing with all fitting of float valve , constructing masonry chamber , dry stone pitching , providing and fixing gun metal gate valve , providing and laying 60mm thick faciory made cement concrete interlocking paver block

Central Government/Public Sector

CTN :44992564

05 May, 2026 32.37 Lacs

Nagpur - Maharashtra

Tender For supply of spares for air conditioning system installed on beml c c > f> f - 6 female 90 degree part no rd56945op , 8 female 90 degree part no rd56840op , 10female 90 degree part no rd57231op , 10 male straight part no rd56951op , 3 speed switch part no rd53646o , 6 male straight part no rd57805op , binary pressure switch part no 955ac81573 , binary switch part no rd54640op , blower motor assly part no rd5129331p , compressor part no rd510725op , compressor oil part no rd57103op , coil condenser part no rd476320 , control knob part no rd559280 , core combi htr evap part no rd3213410 , evaporator core assembly part no rd21370op , expansion valve part no rd56868op , expansion valve part no rd570150p , fan motor assy 24v part no rd586276p , fan motor assy 10 in dia 24 v part no rd587031 , valve part no rd58076op , fitting part no rd57225op , hose 50 ft part no rd55008600p , motor double blower 24 v part no rd588380p , pressure switch part no rd59577op , receiver drier part no rd511188op , receiver drier part no rd570621p , receiver dryer part no rd570611p , refrigerant gas part no r134a , relay 24v part no rd56693op , thermostat part no rd442724p , high pressure switch part no rd568330p , hose no 10 part no rd5501060op , hose 6 part no rd55006000p , ac charging kit assy part no rd511170op , ac crimping tool part no rd51125op , filter foil framed part no rd3212640 , 10 female 90 degree part no rd57231op , hose 50 ft part no rd55006600p , condenser part no r6260

CTN :44757118

27 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur f

Central Government/Public Sector

CTN :44968206

14 May, 2026 NA

Bhavnagar - Gujarat

Tender For set of items for gas cutter of make esab or its equivalent in messer and ador . set consisting of 06 items as follows. 1)for usage of lpg gas cutting/ welding torch. qty/set. = 01 no. 2) flash back arrester suitable for fitting to inlet of lpg fuel gas blow pipe torch end. qty/set. = 02 nos(01 fr18 lpg & 01 fr 18 oxygen). 3) flash back arrester suitable for fitting to outlet of lpg fuel gas blow pipe regulator end. qty/set. = 02 nos(01 frt 3/8 lh lpg & 01 frt 3/8 rh oxygen). 4) lpg regulator along with adaptor & two numbers pressure gauges for inlet & outlet. qty/set. = 01 set. 5) gas cutting nozzle suitable for lpg gas size 3/16 inch. qty/set. = 01 no. 6) gas cutting nozzle suitable for lpg gas size 1/16 inch. qty/set. =01 no. note: one sample set should be got approved before effecting bulk supply. [ warranty period: 30 months after thedate of delivery ]

State Government

CTN :44944160

30 Apr, 2026 NA

Ranchi - Jharkhand

Tender For empanelment & supply of hostel kitchen items - ms single burner gas ranger burner size - 5 inch (dia) 202 - 18inch x 18inch high pressure body type: heavy stainless steel body; burner type: single heavy burnner round size; shape: square - color: silver.package includes: 1), bhatti stove 2) fitted 6 ft. brass nut hose pipe for leakage resistant fitting. 3) 1pc high pressure brass head regulator. 4) 1pc high pressure brass valve. 5) 1pc long lighter (1.5 feet). total of 5 different items., ss single burner gas ranger burner size - 5 inch (dia) 202 - 18inch x, 18inch high pressure body type: heavy stainless steel body; burner, type: single heavy burnner round size; shape: square - color: silver, package , minimum load bearing capacity- 150kg includes: 1) bhatti, stove 2) fitted 6 ft. brass nut hose pipe for leakage resistant fitting., 3) 1pc high pressure brass head regulator. 4) 1pc high pressure brass, valve. 5) 1pc lighter. total of 5 different items., lpg gas cylinder regulator (high pressure.) ( material: aluminum) +, steel suraksha steel wire reinforced lpg hose- isi and iso certified., toughened glass top 2 burner gas stove - low pressure with regulator, & pipe material: 100 % rustresistant stainless steel frame with black, powder coating, top made of toughened glass for durability, shape:, rectangle warranty information: min 1 years manufacturer's warranty, –make: prestige/sunflame/surya/ glen/borosil/butterfly/pigeon/bajaj/, or in house e-commerce brand isi certified; package includes: gas stove,, brass burners warranty: minimum 2 year, lpg gas cylinder regulator (low pressure ) material: aluminum) +, steel suraksha steel wire reinforced lpg hose- isi and iso certified,, material - zinc alloy, ss tub (degchi with lid and with very long handles)- around 10 kg, weight; min 20" dia, ss tub (degchi with lid and with very long handles) - around 25 kg, weight; min 32" dia (rice, making capacity: minimum 30 kg), ss tub (degchi with lid and with very long handles) - around 17 kg, weight; min 26" dia(rice making capacity: minimum 22 kg), kadai 24" dia, 8 kg around; made of hindalium, kadai 36" dia, 21 kg around; made of hindalium, kadai 32" dia, 15 kg around; made of hindalium, kadai 16" dia, 3.5 kg around; made of hindalium, kadai 12" dia, min 1.5 kg ; made of hindalium, small kadai around 20 cm dia, min 800 gm; made of hindalium, ss deep laddle size 3 no; min dia 2" x 11”; weight around 150 gm, ss deep laddle size 5 no; min dia 4" x 12”; weight around 220 gm, ss deep laddle size 8 no; min dia 4" x 14.5”; weight around 900 gm, ss rice panja 4 no dia 4inchx10inch weight 110 gm, ladle for dal, sambar 1' handle with wooden handle.depth around, 300ml, ladle for dal, sambar 3' handle : depth - around 600ml (wooden handle), ss bucket capacity-min 15 lit weight around 1.8kg, ss bucket capacity- min 18 lit weight around 2kg, garbage drum ( capacity-240 lt) plastic with wheels; height 1080 mm;, length 760 mm; width 595 mm ; material ldpe; colour green,load, carrying capacity 60 kg,wall non- perforated,lid swing type., ss containers small 500 ml weight min-220gm., ss containers small 100 ml. min weight-80gm., ss drum with lid of capacity approx 150- 160 ltr weight approx 15 kg, ss drum with lid of capacity approx 100- 110 ltr weight approx 10 kg, ss drum with lid of capacity around 50-60 ltr, weight approx 6 kg, ss drum with lid of capacity around 30 ltr, weight approx 3.5 kg, ss kitchen veg knife (thin blade) 8'' size, ss peeler; blade size: 3"; total length including blade: 7", ss gas lighter crystal 7inch. material- ss, wood poori / chapati rolling pin material: wood. standard size (chakla, with belan); size 10 no, tea strainer (elephant) stainless steel wire in mesh 0.24 mm strainer, mesh aperture 700 micron material of strainer - stainless steel food, grade, cup / saucer set (pack of 6); overall height of cup/mug 62 mm; overall, diameter of cup/mug 100 mm;, wall thickness of cup/mug 3 mm. capacity around 200ml. material -, bo

Tube End Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government