Latest tube expander Tenders | Government tube expander Tenders

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45532362

03 Jul, 2026 45.00 Lacs

Bhuj - Gujarat

Tender For certain repair to water supply distribution lines and other connected items at mil stn bhuj and gandhidham under ge (a) bhuj - taking up u/s ci /di/ac water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 400 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and as directed., all as per item 1 above but 250 mm dia bore complete all as specified and as directed., all as per item 1 above but 200 mm dia bore complete all as specified and as directed., all as per item 1 above but 150 mm dia bore complete all as specified and as directed., all as per item 1 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 400 mm bore with spigot and socket end centrifugally cast class "k- 9" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 6 above but 250 mm dia bore complete all as specified and as directed., all as per item 6 above but 200 mm dia bore complete all as specified and as directed., all as per item 6 above but 150 mm dia bore complete all as specified and as directed., all as per item 6 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 11 above but 150 mm dia bore complete all as specified and as directed., all as per item 11 above but 100 mm dia bore complete all as specified and as directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size 250 upto 400 mm dia complete all as specified and as directed., all as per item 13 above but upto 80 to 200 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 100 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 150/200 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 250 to 400 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 80 to 200 mm bore complete all as specified and as directed., taking down carefully cast iron sluice valve of size 250 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 200 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 150 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 100 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass s

State Government

CTN :45477916

15 Jun, 2026 26.96 Lacs

Kupwara - Jammu And Kashmir

Tender For supply of items on rent/day basis on the eve of festival mata kheer bhawani at tikker kupwara from 19th to 23rd of june 2026. - hire charges/day basis including supply, installation and all carriages as required. supply and installation of waterproof tents / shamyana /pandals to be set over the frame work of pipes the top cover by waterproof tarpal dully fix incl.inner lining bwo fancy lining/ crewal at different sites as per requirement incl.electrification ceiling fans ,bulbs etc wiring and carpetting over 10-12mm thermacol cushion along the tent area incl. all cost and carriages complete job., supplying and installation of mattresses, quilts(blankets) and pillows incl. all carriages and other charges., supplying and installation of canath/view cutter incl. all cost and carriages and other charges., provisding and supplying of plastic chairs incl. all carriages and other charges., providing and supplying of round table with 4 chairs and cloth top for vips/officers incl. all carriages and other charges., providing and supplying of providing of sofa set (5 seated), supplying and installation of excel mating incl. all carriages and other charges., providing and installation zool lighting for decoration, flex banner, providing and supplying of jcb on rent for levelling of land to install tents., provision for path ,nallah muck filling at various spots, provision for motor 5 h.p incl all fitting and fixtures complete job, provision for wash basins of approved quality ,drainage pipes incl grating m trap incl all fiitings and fixtures conplete job, note. any other item not covered in the boq, if required to be executed at site, shall be paid strictly as per the rate mentioned in jksor-2022/lmr after deducting the contractors depreciation

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

Central Government/Public Sector

CTN :45478576

18 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of tube expander equivalent to vernon s type, model no. v5 12 s , tube expander equivalent to vernon s type, model no. v5 13 s , tube expander equivalent to vernon s type, model no. v5 14 s , tube expander equivalent to vernon s type, model no. v5 18 s , tube expander equivalent to vernon s type, model no. v6 13 s , morse taper shank, 5-8 roller, adjustable internal diameter roller burnishing tool range 12.50 to 13.00mm , high quality industrial micro abrasive flexible nylon brushes 6.40mm od , high quality, industrial micro abrasive flexible nylon brushes 12.70 mm od , tube expansion lubrication paste in 5 kg bucket

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

CTN :45322006

01 Jun, 2026 NA

Panipat - Haryana

Tender For rc/purchase of workshop tool / general consumables material (part-1) > - araldite, make- pidilite (1.8kg packing), sr-998, make: pidilite, ( per kg), m-seal (per kg.), make: pidilite, locktite -406 (per 20ml), make: hankle, blue tube paste (set), hold tite (kg.), make-pidilite, rustolene (per ltr), birkosit sealing compound, dunlop adhesive (kg.), safeda (zink white powder) (per kg), graphite powder (kg.), make-vicco, lock tite 641 standard make (50 ml), lock tite 401 standard make (set), safety solvent standard, molikote paste 1000 (pkt./tube), molykot- g rapid plus, molykot- d-321 spary, molykot spray 1000 (400 ml), molykot grease 1000, molykot-z powder (per kg), anabond 666 (100gram), molykot spray l-0500, stag-b compound jointing (per kg), dp test kit set of 03 bottles, make: checkmate, wd-40 spray (400 ml), make- pidilite, brasso (500 ml), puf spray pu foam insulation sealent (750gram), make- abro, roll guard grease, make: j.d jones (per kg), grease unirex n-3, make- mobil (per kg), gadus grease s2 v 100 3, make- sheel (per kg), bearing retainer 660, thread seal 542, fevicol sh (per kg), cold galvansing compound (6017) pure zink undercoating, make- twin tech india pvt ltd., feviquick 50 ml, cotton waste (kg.), marking cloth (mtr.), filter cloth, coton cloth (canvas), size-48 (per mtr), old dhoti, heavy duty forged steel u-clamp (pcs), steel wire brush (pcs.), painting brush size 2 ashoka make, painting brush size 3 ashoka make, painting brush size 4 ashoka make, painting brush size 5 ashoka make, painting brush size 6 ashoka make, steel lock, size-65mm , make- harison, aldrops with accessories, size-12 , material-steel, chargeble led torch 6 to 8 , teflon tape, make- champion, grease gun 2 kg., grease gun 5 kg., grease gun 10 kg., power master make tube expander with main drill shaft and ratchet handle complete set size 45mm, power master make tube expander with main drill shaft and ratchet handle complete set size 90mm, vibration meter, (pcs.), ultrasonic thickness tester (set), measuring tape 3 mtr., make-hi-wide (pcs.), measuring tape 5 mtr., make-hi-wide (pcs.), measuring tape 10 mtr., make-hi-wide (pcs.), measuring tape, 13mm fiberglass water proof, 50 mtr, make- freemans, measuring tape, 13mm fiberglass water proof, 100 mtr, make- freemans, grinder ag-4, make: bosch, grinder ag-7, make: bosch, impact wrench model gds 18e, make: bosch, walkie talkie model-tk3501 make: kenwood (license free), temperature gun, range: 0-2000c, make- fluke, temperature gun, range: 0-5500c, make- fluke, ss paint air spray gun, master level +0.02mm accuracy, size-6 , make- mitutoyo/rsk japan, dial test indicator with magnetic stand, 50mm, make- mitutoyo., shore-a digital rubber hardness durometer (din-53-505,aspm-d,2240) (pcs.), make- eco-sr, drill machine 0 to 10mm make bosch, lead wire 0.5mm (per roll rate required), lead wire 0.7mm (per roll rate required), zig zag clamp, size-3/4 , tube expender with main drill shaft with ratchet handle complete set, make: power master, car washing pressure pump heavy duty, working pressure 125 bar with 40 mtr extra pipe.(jet pump), make: bosch, electronic type weighing scale, range-0.01mg to 100gm, electronic weighing scale suitable upto 2kg, electronic weighing machine, size-600x600mm, cap-200 kg, electronic weighing machine, size-400x400mm, cap-100 kg, electronic weighing machine, size-400x400mm, cap-50 kg, straight shank bit/tapper shank drill bit/ tap set, make- miranda, heavy duty impact socket with hole 19mm for impact wrenach, heavy duty impact socket with hole 30mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 32mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 34mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 46mm(suitable for 1 inch square) for impact wrench, sa-46 steel socket set, make- taparia, tool goti 34 no., air blower, make- bosch, hot air blower 1500 watt bajaj make (room heat

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

Tube Expander Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors