Latest tube shield Tenders | Government tube shield Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :45209551

23 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of set of modified end shield de and nde side suitable for 6306c3 bearing of od 72mm and width 19mm of m/s ranjan make sctmb of frame size 100l, protection ip55 and material as per is-210 grade 220, for wag9 /wap7 locomotives. a set consists of 02 items in six nos. as follows :- (1)driving side end shield assembly along with inner and outer bearing cover, (2) non-driving side end shieldassembly along with inner and outer bearing cover.( set details as per annexure enclosed) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45280217

11 Jun, 2026 NA

Angul - Odisha

Tender For tender for supply of boilers erosion protection shields - eco shield h 004 39x1500x3mm , protn shield clamps eco ss304 39x3x500 , shield eco 90dinside pp 008 pp 077 , shied for ltsh ss304 , ww screen halfshield ntpc pp 004 and 3 , bend shield ntpc tstps md pp h bhel , bend shield ntpc tstps bmd pp h bhel , bend shield ntpc tstps bmd pp h , bend shield pp 010 pp 077 and 7 , half tube shield pp 011 pp 077 and 04 , quarter shield ss309

Central Government/Public Sector

CTN :45154111

01 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of end shield cover for driving end & non driving end for three phase dual speed induction motor having part no.: 1. driving end: hec/fl/100 or ss/de/150 or mi-de-101. 2. non driving end: hec/bc/101 or ss/nde/201 or mi-nde-102. (note: 01 set consists of 02 items) [ warranty period: 30 monthsafter the date of delivery ]

Central Government/Public Sector

CTN :45116874

18 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of end shield (driving end) to presstech part no. sig 44002 for presstech make 4.5 kw alternator as per rdso specification no. rdso/pe/spec/tl/0054-2003(rev.0) with amendment no.1 & 2. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :44971252

04 May, 2026 78.56 Lacs

Bokaro - Jharkhand

Tender For supply of half round shields clips and tube shields for ctps and rtps c c - clip for tube 47.63mm clip height 30mm , clip for tube shield d 47.63mm ss304 , clip for tube 44.5mm clip height 30mm , hrs for tube d 44.5mm s id 48mm l 2m , half round tube shield for ltsh tube , hrsfor tube d 47.63mm s id 47.63mm l 2m , hrs for tube d 44.5mm s id 44.5mm l 2.1m , hrs for tube d 76.1mm s id 76.1mm l 1m , shield type 04 ltsh upper and lower , half round shield , st tube shld d-57 l 1000 t 3 moc ss304 , st tube shld d 63.5 l 1000 t 3 moc ss304 , st tube shld d 42 l1000 t 3 moc ss304 , 90 bend tube shld d 42 l 600 ss304 outer , half round tube shield bp screen tube , offset bend tube shield 63.5x350mm var 1 , offset bend tube shield 63.5x350x3 var 2 , offset bend tube shield 63.5x310mm var 1 , offset bend tube shield 63.5x370mm var 4 , offset bend tube shield,63.5x350mm var 5 , offset bend tube shield 63.5x350mm var 6

Central Government/Public Sector

CTN :44629840

25 Apr, 2026 NA

Kokrajhar - Assam

Tender For corrigendum : supply of shield , prot- ww qtr shield , 63.5mm , 2.5mm , shield , prot- screen tube , strt , 76.1mm , 3mm , half tube shield , mtp/pp/4793/a3/000 + , half tube shield , 38.1x3x1000mm , half tube inner shield , 90deg , 38.1mm , protection shield , shield , prot- f/ltsh , ss , outer , 90d , 47.63mm , shield , prot- inner , ltsh , ss , 90d , 47.63mm , shield , prot- reheater , strt , 54mm , 3mm , halftubeshield51x3x1

CTN :44843901

12 May, 2026 NA

Bokaro - Jharkhand

Tender For corrigendum : supply of set of modified end shield de and nde side suitable for 6306c3 bearing of od 72mm and width 19mm of m/s ranjan make sctmb of frame size 100l, protection ip55 and material as per is-210 grade 220, for wag9 /wap7 locomotives. a set consists of 02 items in six nos. as follows :- (1)driving side end shield assembly along with inner and outer bearing cover, (2) non-driving side end shield assembly along with inner and outer bearing cover.( set details as per annexure enclosed) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44913020

06 May, 2026 NA

Kalyan - Maharashtra

Tender For supply of end shield for non- driving end side compatible with cgl make mvmt spec: kw-26, hp-35 suitable for 6313 bearing for machine no.26kd2 along with inner and outer grease covers with bolt, washer and suitable grease pipe and nipple assly. frame size c200m. material to be procured from clw approved sources or their authorized dealers only. ]

Central Government/Public Sector

CTN :44900520

06 May, 2026 NA

Erode - Tamil Nadu

Tender For supply of set of driving side and non driving side end shield for mvsi/mvsl aux motors 3hp ranjan make suitable for 6306 bearing along with grease cup on both sides as per drg. no. elw/bsl/1/wam4/124.281. [ warranty period: 30 months afterthe date of delivery ]

Tube Shield Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors