Latest tubing bundles Tenders | Government tubing bundles Tenders

CTN :45102745

25 May, 2026 NA

Bokaro - Jharkhand

Tender For supply of set of nylon tube consisting of 03 sub-sets as follows:- (1) 1400 mm long, 6 mm dia. of nylon tube where both end fitted with double ferrule & nut of brass compatible of 6 mm od brass fitting. colour code and quantity as:- red (for mr)= 1 no. white (for fp)= 1 no. yellow (for bc)= 2 nos. (2)1200 mm long, 6 mm dia. of nylon tube where both end fitted with double ferrule & nut of brass compatible of 6 mm od brass fitting. colour code and quantity as:- red (for afi lp)= 1 no. green (for bp)= 1 no. (3) 170 mm long, 6 mm dia. of nylon tube where both end fitted with double ferrule & nut of brass compatible of 6 mm od brass fitting. colour code and quantity as:- red (for afi hp)= 02 nos. (nb: protective cover to be provided on brass fittings to avoid contamination and damage) [ warranty period: 30 months after the date of delivery ]

CTN :45103035

26 May, 2026 NA

Bokaro - Jharkhand

Tender For supply of set of nylon tube consisting of 03 sub-sets as follows:- (1) 1400 mm long, 6 mm dia. ofnylon tube where both end fitted with double ferrule & nut of brass compatible of 6 mm od brass fitting. colour code and quantity as:- red (for mr)= 1 no. white (for fp)= 1 no. yellow (for bc)= 2 nos. (2) 1200 mm long, 6 mm dia. of nylon tube where both end fitted with double ferrule & nut of brass compatible of 6 mm od brass fitting. colour code and quantity as:- red (for afi lp)= 1 no. green (for bp)= 1 no. (3) 170 mm long, 6 mm dia. of nylon tube where both end fitted with double ferrule & nut ofbrass compatible of 6 mm od brass fitting. colour code and quantity as:- red (for afi hp)= 02 nos. (nb: protective cover to be provided on brass fittings to avoid contamination and damage). [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45121355

21 May, 2026 NA

Raipur - Chhattisgarh

Tender For supply of protective tube polyacetal complete for axle box guide arrangement to drg.no. t-0-1-648, alt. f and as per rdso specn no. rdso/2009/cg-03 (rev.0 of april 09) with amendment slip no. 1of july 2013 and amendment no.2 of august 2016. [ warranty period: 30 months after the date of delivery ]

CTN :45098766

16 May, 2026 NA

Hyderabad - Telangana

Tender For supply of naso gastric tube adult 100 cm long 16g , naso gastric tube adult 100 cm long 18g , naso gastric tube adult 100 cm long 20g , sheath protective condom , inj iohexol 300 mg per ml in vial of 50 ml , flex finger splint , frog finger splint , phenylepherine 10 mg 1 ml inj , long i v line 15 g 100 cm , long i v line 18 g of 70 cm , tube endo tracheal nasal size 7 point 0 with cuff , tube endo tracheal nasal size 8 point 5 with cuff , i v extension line 10 cm , yankur suction , tab asprin 75mg plus clopid 75mg plus rosuvastatin 10mg , tab clonazepam 0 point 50 mg , tab gabapentin 200mg plus nortriptyline , silicon tubal rings

CTN :45090342

26 May, 2026 NA

Kochi - Kerala

Tender For providing of custom bid for services - contract for protective coating of tube internals and components of heat exchanger bundles at bpcl kochi refinery

Central Government/Public Sector

CTN :45110708

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s diesel / ac loco/emu/c&w component such as protective tube collars , outer spring seat(protective tube) attachments as is where is conditio.1. during delivery any major nfs items found the same should be handed over to custodian. jcb loading allowed. pl.no. 98050126. custodian: cdms-rsf-gsd-per. location: wall no 118 to 121

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

CTN :42579207

03 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of sch viii (supply of needle & syringes) - sch viii (supply of needle & syringes), disposable needle sterile length 1/2" guage 25, suture needle, half circle triangular nos. 2 to 20 (cutting), insulated needle for use with peripheral nerve stimulator 22g x 2" x 50 mm., insulated needle for use with peripheral nerve stimulator 22g x 35 mm., insulated needle for use with peripheral nerve stimulator 24g x 1"x 25 mm., echogent needles for usg guided peripheral nerve blocks 20g / 21g x 100 mm., echogent needles for usg guided peripheral nerve blocks 22g x 50 mm., epidural needles 16 & 18 guage 7.5cm to 11cm (disposable), epidural needles (long length) 18g (more than 100 mm. length), sterile disposable lancet size 28-32 (plastic lancet needle type), sterile disposable hypodermic plastic syringe 20cc, cn. with leur lock, hypodermic syringes,disposable sterile, sterile pack,with/without leur lock, hub 1ml syringe with marking at 0.1 ml, asepto syringe 100 ml of heavy plastic barrel and rubber bulb with marking., bag arm rubber with cover for b.p. apparatus, adult size velcro.rubber bag size 13 x 23 cms., keratome, size 2.8 mm, type-regular(ophthalmic), angle-45 degrees, bevel type- bevel up (pointed)blade-stainless steel/carbon steel,handle- polycarbonate, use- disposable single use, mvr, gauge 23g type-regular(ophthalmic), blade-stainless steel handle- polycarbonate, use- single disposable use, triple lumen catheter 7.5fr with 14g distal lumen, length-15cm. kit contain 1 teflon-coated j nitinol guidewire particularly kink-resistant with guide-advancer. 1 dilator, 10cm long, 3 injection caps, 3 clamps,1 supplementary fixation wing,1 scalpel, 1 syringe 5 ml, 1 adaptor for pressure transducer, 1 puncture needle 18g, 70mm long with a pre-connected valve to aviod air embolism and blood loss, 18g short iv cannula, double lumen subclavian/ jugular catheter kit (adult) ptfe (teflon) cannula curved od 2.7/d 11.5fr-12fr/chx5.3in. (3.8 mm x 13.5 cm) 6 side holes silicon tube s clamping extension, clamp luer lock "y" connector with protective caps size 12.5, 15 with guide wire introducer needle, dialator , 3fr double lumen cvc catheter with 60mm double-lumen polyurethane central venous catheter inserted by seldinger technique, radio opaque material for catheter, the user should be able to choose from 2 type of introducer, i.e.needle 23g or i.v. cannula 22g, latex free, the central venous catheter set should contain: 1 double-lumen polyurethane 3fr catheter, 1 short i.v. cannula 22g, 1 introducer needle 23g, 1 kink resistant guidewire with soft flexible tip, dilator with cylindrical /pencil point tip, 1 secondary fixation wing, 2 injection caps, 1 scalpel, 1.5 ml syringe, peripherally placed radiopaque central single lumen catheter. guage 14/16 (100%) (needles size/catheter size) length - 55cm - 70cm, peripherally placed radiopaque central single lumen catheter. guage 18/20 (100%) (needles size/catheter size) length 30cm - 45cm, fully radiopaque pur catheter 16g for femoral artery centimeter marking from 5-15cm, winged hub for skin fixation, supple distal tip. kit should contain 1 pur catheter with xro lines,1 puncture needle, 1 j guidewire with wishbone-type guidewire advancer, 1 dilator, radial/femoral arterial pe catheter with antikinking collar & fixation wings,straight guide wire, introducer needle.catherter size g- 18, length 10cm, radial/femoral arterial pe catheter 20g, 8cm puncture needle is fitted with a visualization chamber allowing to confirm that the vessel punctured is an artery (pulsatile movement of the blood). the needle is also fitted with a silicone bloodless system valve to avoid loss of blood during vessel puncture and a funnel hub to facilitate the insertion of the guidewire, peripherally inserted central catheter with guide wire with peelable cannula, made of polyurethane, non-toxic, with radio opaque line throughout the catheter with marking every cm with leur connector at proximal en

CTN :45072222

14 May, 2026 NA

Goa - Goa

Tender For repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

Central Government And Public Sector

CTN :45090753

19 May, 2026 NA

Nagpur - Maharashtra

Tender For supply of protective tube polyacetal complete for axle box guide arrangement to drg.no. t-0-1-648, alt. f and as per rdso specn no. rdso/2009/cg-03 (rev.0 of april 09) with amendment slip no. 1 of july 2013and amendment no.2 of august 2016. [ warranty period: 30 months after the date of delivery ]

Tubing Bundles Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector